Important compatibility info
| Type | Brake Hose |
| Thread Measurement 1 | M10x1 |
| Thread Measurement 2 | M10x1 |
| Length | 166 mm |
| Function | Brake Hose |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thread Type | with internal thread |
Important compatibility info
| Length | 418 mm |
| Height | 33 mm |
| Width | 188 mm |
| Function | Air Filter |
| Additional Information 2 | for dusty operating conditions |
| Type | Air Filter |
| Filter type | Filter Insert |
Important compatibility info
| Function | Air Filter |
| Width | 206 mm |
| Length | 251 mm |
| Type | Air Filter |
| Height | 60 mm |
| Filter type | Filter Insert |
Important compatibility info
| Filter type | without connection for water sensor |
| Height | 187 mm |
| Outer diameter | 86 mm |
| Inlet Diameter | 10 mm |
| Function | Fuel filter |
| Type | Fuel filter |
| Outlet Diameter | 10 mm |
Important compatibility info
| Replaced by | BKB3349 |
| Placement on Vehicle | Left Rear, Right Rear |
| Length 1 | 1558 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Important compatibility info
| Inner diameter | 10 mm |
| Diameter | 32 mm |
| Length | 50 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK6285 |
Important compatibility info
| Thread Measurement 1 | M16x1.5 RHT male |
| Thread Type | with right-hand thread, with external thread |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Paired article numbers | FTR4690 |
Important compatibility info
| Thread Measurement 2 | M12X1.25 |
| Thread Size | M12X1.25 |
| Length | 320 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Thread Measurement 1 | M16x1.5 RHT male |
| Thread Type | with right-hand thread, with external thread |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Paired article numbers | FTR4691 |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Length | 86 mm |
| Inner diameter 2 | 78 mm |
| Inner diameter 1 | 21 mm |
| Type | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
| Additional Information 2 | with clamps |
Important compatibility info
| Function | Accessory Kit, brake shoes |
| Type | Accessory Kit, brake shoes |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Required quantity | 1 |
| Function | Warning Contact, brake pad wear |
| Length | 610 mm |
| Type | Warning Contact, brake pad wear |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Repair Kit, stabiliser coupling rod |
| Type | Repair Kit, stabiliser coupling rod |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Inner diameter 2 | 19 mm |
| Colour | Black |
| Material | PE (Polyethylene) |
| Function | Charge Air Hose |
| Inner diameter 1 | 24 mm |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1000S)
Important compatibility info
| Required quantity | 1 |
| Function | Warning Contact, brake pad wear |
| Length | 360 mm |
| Replaced by | BWL3139 |
| Type | Warning Contact, brake pad wear |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Warning Contact, brake pad wear |
| Length | 370 mm |
| Type | Warning Contact, brake pad wear |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Diameter | 38 mm |
| Version | Fitting Kit |
| Mounting Type | Bolted |
| Cone Size | 14.3 mm |
| Thread Size | M12X1.25 |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Measurement 2 | M10X1.5 |
| Thread Size | M10X1.5 |
| Length | 330 mm |
| Replaced by | BDL6834 |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Length | 53 mm |
| Diameter | 70 mm |
| Inner diameter | 10 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Rear |
Important compatibility info
| Rod/Strut | Suspension Rod |
| Thread Measurement 2 | M10x1.5 |
| Thread Size | M10x1.5 |
| Length | 186 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Material | Cast Steel |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















