Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.042 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 653 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Function | Adjuster, braking system |
| Operating Mode | Manual |
| Placement on Vehicle | Rear Axle, both sides |
| Weight | 2.546 kg |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.25 kg |
| Placement on Vehicle | both sides |
| Length | 405 mm |
| Housing Diameter | 19 mm |
| Eject Force | 615 N |
| Stroke | 130 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 238 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.232 kg |
| Cross Section | 35 mm² |
| Type | Plug |
| Number of Connectors / Ports | 2 |
| Function | Plug |
| Port / Connector type | REMA Connector |
| Version | Aftermarket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Function | Joint Kit, drive shaft |
| Weight | 1.850 kg |
| Internal Teeth, wheel side | 27 |
| External Teeth, Wheel Side | 26 |
| Thread Size | M22x1,5 |
| Placement on Vehicle | Front Axle Right, Wheel Side |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 527 mm |
| Weight | 0.030 kg |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Colour | Red |
| Number of Connectors / Ports | 6 |
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
| Type | Resistor, interior blower |
| Weight | 0.060 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
| Weight | 0.169 kg |
| for OE number | 470 016 00 21 |
| Material | AEM (Ethylene Acrylate Rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.25 kg |
| Function | Gas Spring, boot/cargo area |
| Length | 365 mm. 231 mm |
| Housing Diameter | 18 mm |
| Eject Force | 450 N |
| Placement on Vehicle | both sides |
| Stroke | 107 mm |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 16.5 mm |
| Housing length | 231.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.11 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 915 mm |
| Colour | Grey |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.15 kg |
| Number of Connectors / Ports | 12 |
| Combi Switch Function | with wipe-wash function, with light dimmer function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Placement on Vehicle | Right Rear, Left Rear |
| Length | 1779 mm |
| Weight | 0.505 kg |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Additional Information | with axle nut |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Inner diameter | 48 mm |
| Outer diameter | 86.5 mm |
| Width | 42 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Weight | 0.928 kg |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (174117)
- 1x Febi Circlip (174295)
£34.46
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.080 kg |
| Paired article numbers | 178005 |
| Function | Sensor, wheel speed |
| Cable Length | 735 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.46
Important compatibility info
| Width of castor bearing surface | 30 mm |
| Weight | 0.210 kg |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 60 mm |
| Material | Plastic |
| Mounting points diameter | 10 mm |
| Inner diameter | 10 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with top |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.47
Important compatibility info
| Function | Sensor, wheel speed |
| Cable Length | 620 mm |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.04 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.48
Important compatibility info
| Weight | 2.2 kg |
| Function | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Length | 327 mm |
| Outer diameter | 166 mm |
| Type | Suspension Spring |
| Wire Diameter | 13.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.48
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Length | 158 mm |
| Weight | 1.950 kg |
| External Thread Size | M30 x 1,5 |
| Internal Thread Size | M24 x 1,5 |
| Spanner Size | 36 |
| Extra Description | ProKit |
| Thread Type | with right-hand thread |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Function | Bellow, driver cab suspension |
| Type | Bellow, driver cab suspension |
| Weight | 1.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.354 kg |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 2.510 kg |
| Placement on Vehicle | Rear Axle |
| Length | 334 mm |
| Outer diameter | 132 mm |
| Function | Suspension Spring |
| Wire Diameter | 13.5 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 0.78 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 3.14 kg |
| Placement on Vehicle | Rear Axle |
| Length | 261 mm |
| Outer diameter | 128 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.18 kg |
| Placement on Vehicle | Left, Right |
| Material | Plastic |
| Colour | Black |
| Type | Exterior Door Handle |
| Function | Exterior Door Handle |
| Lock System | with lock barrel, with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 1.099 kg |
| Function | Tie Rod |
| Paired article numbers | 49065 |
| Length | 370 mm |
| Placement on Vehicle | Front Axle Left |
| Extra Description | ProKit |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod |
| External Thread Size | M12 x 1,5 |
| Additional Information 2 | with clamps, with steering bellow |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (19336)
- 1x Febi Inner Tie Rod (32597)
- 1x Febi Bellow, steering (39602)
- 1x Febi Clamping Clip (38761)
- 1x Febi Clamping Clip (38754)
£34.49
Important compatibility info
| Weight | 0.17 kg |
| Placement on Vehicle | both sides |
| Length | 445 mm |
| Housing Diameter | 15 mm |
| Eject Force | 110 N |
| Stroke | 175 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 6 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 238 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.199 kg |
| Height | 169 mm |
| Outer diameter | 107 mm |
| Additional Information 2 | with seal ring |
| Spanner Size | 36 |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.54 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 026 129 589 A S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 1.3 kg |
| Outer diameter | 116 mm |
| Thickness | 70 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 98 mm |
| Outer diameter 1 | 42 mm |
| Outer diameter 2 | 59 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Placement on Vehicle | Front |
| Type | Wiper Motor |
| Weight | 1.05 kg |
| Rated Power | 30 W |
| Driver Position | for left-hand drive vehicles |
| Function | Wiper Motor |
£34.49
Important compatibility info
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 302 mm |
| Weight | 1.13 kg |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| Min. Length | 207 mm |
| Pipe Diameter | 44 mm. 54 mm |
| External Thread Size | M12 x 1,75 |
| Operating Mode | Mechanical |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Outer diameter | 140 mm |
| Bearing Type | Tapered Roller Bearing |
| Width | 37 mm |
| Inner diameter | 81 mm |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
| Weight | 2.108 kg |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 400 mm |
| Outer diameter | 121 mm |
| Function | Suspension Spring |
| Wire Diameter | 14 mm |
| Weight | 3.23 kg |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Length | 191.5 mm |
| Valve stem diameter | 9.92 mm |
| Type | Exhaust Valve |
| Notches / Holes Number | 1 |
| Weight | 0.201 kg |
| Function | Exhaust Valve |
| Valve head diameter | 45.95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 1.190 kg |
| Function | Release Fork, clutch |
| Type | Release Fork, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, release fork (22759)
- 1x Febi Thrust Roller, release fork (35529)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
- 2x Febi Bearing, clutch lever (35984)
- 1x Febi Release Fork, clutch (44433)
£34.49
Important compatibility info
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
| Min. Length | 339 mm |
| Weight | 3.580 kg |
| External Thread Size | M12 x 1,25 |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
| Max. Length | 518 mm |
| Paired article numbers | 193112 |
| Placement on Vehicle | Front Axle Right |
| Mounting points diameter | 13 mm |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.155 kg |
| Inner diameter 2 | 32.19 mm |
| Inner diameter 1 | 19.08 mm |
| Function | Connecting Rod, air compressor |
| Type | Connecting Rod, air compressor |
| Hole Spacing | 92.46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.25 kg |
| Type | Gas Spring, boot/cargo area |
| Placement on Vehicle | Left Rear |
| Length | 628 mm |
| Housing Diameter | 19 mm |
| Eject Force | 600 N |
| Stroke | 256 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 340.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 328 mm |
| Outer diameter | 134 mm |
| Function | Suspension Spring |
| Wire Diameter | 14 mm |
| Weight | 2.58 kg |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.043 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 605 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Function | Housing Cover, crankcase |
| Material | Aluminium |
| Placement on Vehicle | Rear |
| Extra Description | febi Plus |
| Type | Housing Cover, crankcase |
| Weight | 0.293 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 57 mm |
| Weight | 0.351 kg |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Material | Thermoplastic polyester elastomer |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Length | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (180069)
- 1x Febi Molybdenum Grease (02582)
£34.49
Important compatibility info
| Paired article numbers | 193111 |
| Mounting points diameter | 13 mm |
| Placement on Vehicle | Front Axle Left |
| Piston conrod diameter | 22 mm |
| Max. Length | 518 mm |
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
| Shock Absorber System | Twin-Tube |
| Weight | 3.620 kg |
| Min. Length | 339 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| External Thread Size | M12 x 1,25 |
| Pipe Diameter | 51 mm |
| Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.075 kg |
| Type | Repair Kit, clutch booster |
| Function | Repair Kit, clutch booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| ABS Ring Diameter | 104 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 48 |
| Weight | 2.858 kg |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| External Teeth, Wheel Side | 38 |
| Internal Teeth, wheel side | 27 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Additional Information | with rubber-metal mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Weight | 0.848 kg |
| Placement on Vehicle | Upper, outer, Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Outer diameter | 100.7 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Material | Rubber/Metal |
| Placement on Vehicle | Lower, Front Axle Left, Front, Front Axle Right |
| Weight | 1.268 kg |
| Inner diameter | 16.8 mm |
| Thickness | 98 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.060 kg |
| Extra Description | febi Plus |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Cable Length | 157 mm |
| Function | Sensor, engine oil level |
| Type | Sensor, engine oil level |
| Additional Information 2 | with seal ring |
| Hole Spacing | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.603 kg |
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Material | Rubber/Metal |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Function | Oil Separator, crankcase ventilation |
| Colour | Black |
| Material | Plastic |
| Weight | 0.156 kg |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
| for OE number | 11 61 7 526 654 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023