Important compatibility info
Weight | 0.296 kg |
Type | Slave Cylinder, clutch |
Function | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.510 kg |
Placement on Vehicle | Rear Axle |
Length | 334 mm |
Outer diameter | 132 mm |
Function | Suspension Spring |
Wire Diameter | 13.5 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow, driver cab suspension |
Type | Bellow, driver cab suspension |
Weight | 1.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Inner diameter 1 | 28 mm |
Inner diameter 2 | 57 mm |
Weight | 0.351 kg |
Joint Type | CV Joint |
Type | Bellow Kit, drive shaft |
Material | Thermoplastic polyester elastomer |
Placement on Vehicle | Rear Axle, Wheel Side |
Length | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (180069)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Type | Oil Dipstick |
Length from grip collar to max. marking | 568 mm |
Length from grip collar to min. marking | 587 mm |
Extra Description | febi Plus |
Function | Oil Dipstick |
Weight | 0.34 kg |
Additional Information | with guide funnel/tube |
Colour | Orange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Dipstick (47303)
- 1x Febi Tube, oil dipstick (180728)
Important compatibility info
Weight | 2.0 kg |
Inner diameter | 233.5 mm |
Outer diameter | 446 mm |
Placement on Vehicle | Rear Axle |
Height | 66 mm |
Type | Cover Sheet, brake drum |
Function | Cover Sheet, brake drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.54 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for OE number | 026 129 589 A S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 180302 |
Placement on Vehicle | Front, Right |
Function | Wiper Arm, window cleaning |
Type | Wiper Arm, window cleaning |
Weight | 0.440 kg |
Additional Information 2 | with integrated washer fluid jet |
Material | Steel |
Length | 633 mm |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.155 kg |
Inner diameter 2 | 32.19 mm |
Inner diameter 1 | 19.08 mm |
Function | Connecting Rod, air compressor |
Type | Connecting Rod, air compressor |
Hole Spacing | 92.46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.14 kg |
Placement on Vehicle | Rear Axle |
Length | 261 mm |
Outer diameter | 128 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Wire Diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Dryer, air conditioning |
Type | Dryer, air conditioning |
Weight | 0.764 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.060 kg |
Extra Description | febi Plus |
Colour | Black |
Number of Connectors / Ports | 2 |
Cable Length | 157 mm |
Function | Sensor, engine oil level |
Type | Sensor, engine oil level |
Additional Information 2 | with seal ring |
Hole Spacing | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
Min. Length | 339 mm |
Weight | 3.580 kg |
External Thread Size | M12 x 1,25 |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Pipe Diameter | 51 mm |
Piston conrod diameter | 22 mm |
Function | Shock Absorber |
Shock Absorber Design | Suspension Strut |
Max. Length | 518 mm |
Paired article numbers | 193112 |
Placement on Vehicle | Front Axle Right |
Mounting points diameter | 13 mm |
Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.17 kg |
Placement on Vehicle | both sides |
Length | 445 mm |
Housing Diameter | 15 mm |
Eject Force | 110 N |
Stroke | 175 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 6 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 238 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.190 kg |
Function | Release Fork, clutch |
Type | Release Fork, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, release fork (22759)
- 1x Febi Thrust Roller, release fork (35529)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
- 2x Febi Bearing, clutch lever (35984)
- 1x Febi Release Fork, clutch (44433)
Important compatibility info
Paired article numbers | 193111 |
Mounting points diameter | 13 mm |
Placement on Vehicle | Front Axle Left |
Piston conrod diameter | 22 mm |
Max. Length | 518 mm |
Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
Shock Absorber System | Twin-Tube |
Weight | 3.620 kg |
Min. Length | 339 mm |
Function | Shock Absorber |
Type | Shock Absorber |
Shock Absorber Type | Gas Pressure |
External Thread Size | M12 x 1,25 |
Pipe Diameter | 51 mm |
Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber-metal mounts |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Steering arm type | Control Arm |
Weight | 0.848 kg |
Placement on Vehicle | Upper, outer, Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.23 kg |
Placement on Vehicle | Front Axle Left, Outer, Front Axle Right |
Width | 27 mm |
Outer diameter | 125 mm |
Inner diameter | 70 mm |
Bearing Type | Cylindrical Roller Bearing |
Type | Wheel Bearing |
Function | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shock Absorber Mounting Type | Top pin, Bottom Pin |
Max. Length | 302 mm |
Weight | 1.13 kg |
Piston conrod diameter | 13 mm |
Function | Shock Absorber, driver cab suspension |
Min. Length | 207 mm |
Pipe Diameter | 44 mm. 54 mm |
External Thread Size | M12 x 1,75 |
Operating Mode | Mechanical |
Placement on Vehicle | Front |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Separator, crankcase ventilation |
Colour | Black |
Material | Plastic |
Weight | 0.156 kg |
Extra Description | febi Plus |
Type | Oil Separator, crankcase ventilation |
for OE number | 11 61 7 526 654 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.18 kg |
Placement on Vehicle | Left, Right |
Material | Plastic |
Colour | Black |
Type | Exterior Door Handle |
Function | Exterior Door Handle |
Lock System | with lock barrel, with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 400 mm |
Outer diameter | 121 mm |
Function | Suspension Spring |
Wire Diameter | 14 mm |
Weight | 3.23 kg |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 191.5 mm |
Valve stem diameter | 9.92 mm |
Type | Exhaust Valve |
Notches / Holes Number | 1 |
Weight | 0.201 kg |
Function | Exhaust Valve |
Valve head diameter | 45.95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.213 kg |
Operating Mode | Mechanical |
Spanner Size | 32 |
Opening Pressure | 6.2 bar |
Type | Overflow Valve |
Function | Overflow Valve |
Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 328 mm |
Outer diameter | 134 mm |
Function | Suspension Spring |
Wire Diameter | 14 mm |
Weight | 2.58 kg |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 25 |
Internal Teeth, wheel side | 33 |
Weight | 2.396 kg |
Number of Teeth, ABS ring | 43 |
ABS Ring Diameter | 82 mm |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Weight | 0.284 kg |
Additional Information | with gasket/seal |
Opening Temperature | 92 °C |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Outer diameter | 85 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, manual transmission |
Weight | 0.121 kg |
Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.450 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 38970 |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information | with lock nut |
External Thread Size | M14 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (38969)
- 1x Febi Inner Tie Rod (36505)
Important compatibility info
Weight | 0.420 kg |
Length | 395 mm |
Height | 155 mm |
Width | 155 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Aluminium |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Weight | 0.78 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
Additional Information | with rubber-metal mounts |
Material | Steel |
Steering arm type | Control Arm |
Weight | 1.707 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.354 kg |
Type | Clutch Release Bearing |
Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Wiper Arm, window cleaning |
Weight | 0.429 kg |
Paired article numbers | 180301 |
Additional Information 2 | with integrated washer fluid jet |
Material | Steel |
Length | 561 mm |
Placement on Vehicle | Front, Left |
Extra Description | febi Plus |
Function | Wiper Arm, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | without lid |
Material | Plastic |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Weight | 0.52 kg |
Additional Information | with coolant level sensor |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Length | 290 mm |
Outer diameter | 89.5 mm |
Weight | 2.0 kg |
Type | Spring, driver cab suspension |
Function | Spring, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 377 mm |
Weight | 0.2 kg |
Housing Diameter | 19 mm |
Eject Force | 365 N |
Stroke | 107 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 210.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Height | 48 mm |
Outer diameter | 456 mm |
Weight | 0.88 kg |
Type | Cover Sheet, brake drum |
Function | Cover Sheet, brake drum |
Inner diameter | 224 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 87 °C |
Weight | 0.20 kg |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.456 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Replaces | 07854 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 137 mm |
Width | 57.4 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19 mm |
Function | Brake Pad Set, disc brake |
Weight | 1.720 kg |
Type | Brake Pad Set, disc brake |
Number of wear indicators | 1 Per Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Sensor, suction pipe change-over flap |
Weight | 0.02 kg |
Function | Sensor, suction pipe change-over flap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.33 kg |
Paired article numbers | 178143 |
Material | Cast Aluminium |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 34 mm |
Brake Caliper Type | Brake Caliper (1 piston) |
Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Material | Sheet Steel |
Cone Size | 18 mm |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 177899 |
Weight | 3.324 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Placement on Vehicle | Front Axle |
Length | 119.3 mm |
Width | 69.6 mm |
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.4 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with bolts/screws |
Replaces | 16008; 16078 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.588 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter | 188 mm |
Inner diameter | 173 mm |
Number of Teeth, ABS ring | 100 |
Type | Sensor Ring, ABS |
Function | Sensor Ring, ABS |
Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.08 kg |
Placement on Vehicle | Rear Axle |
Width | 42 mm |
Outer diameter | 229 mm |
Inspection Tag | ECE R90 Approved |
Function | Brake Shoe Set |
Type | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.750 kg |
Height | 383 mm |
Outer diameter | 193 mm |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Strobe-type Beacon |
Temperature range to | 65 °C |
Housing material | Aluminium |
Temperature range from | -40 °C |
Height | 32 mm |
Width | 122 mm |
Colour | Orange |
Rated Power | 18 W |
Cable Length | 1500 mm |
Voltage from | 9 V |
Number of circuits | 4 |
Voltage to | 30 V |
Protection Type (IP Code) | IP67 |
Fulfils ECE norm | R10, R65 |
Light Design | LED |
Weight | 0.137 kg |
Inspection Tag | EMC, SAE |
Depth | 11 mm |
Type | Strobe-type Beacon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.757 kg |
Placement on Vehicle | Right Front |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 56 84 051 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023