Proud to be a UK-based company
Contact us
Important compatibility info
| Pipe Diameter | 8 mm |
| Length | 247 mm |
| Type | Fuel filter |
| Filter type | In-Line Filter, with filter heating |
| Function | Fuel filter |
| Outer diameter | 57 mm |
| Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.08
Important compatibility info
| Type | Timing Belt |
| Number of Teeth | 130 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Width | 23 mm |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.09
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | without wheel bearing |
| Width | 81 mm |
| Outer diameter | 70 mm |
| Inner diameter | 29 mm |
| Number of mounting bores | 5 |
| Outer diameter 1 | 137 mm |
| Type | Wheel Hub |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.09
Important compatibility info
| Number of Connectors / Ports | 3 |
| for OE number | 39210-2F600 |
| Type | Sensor, exhaust pressure |
| Function | Sensor, exhaust pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.09
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 156.4 mm |
| Width | 68.5 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.5 mm. 20.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.10
Important compatibility info
| Material | Plastic |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 70 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 24.5 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.10
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Tie Rod |
| Function | Tie Rod |
| External Thread Size | M16 x 1,5, M12 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (184891)
- 1x Febi Inner Tie Rod (184263)
£34.10
Important compatibility info
| Additional Information | with gaskets/seals |
| Material | Aluminium |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
| Core Length | 134 mm |
| Core Width | 97 mm |
| Core Depth | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.10
Important compatibility info
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Inner diameter | 15 mm |
| Additional Information 2 | without ball bearing |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.11
Important compatibility info
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178093 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.11
Important compatibility info
| Type | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178092 |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.11
Important compatibility info
| Additional Information 2 | with retaining ring, with bolts/screws |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 43 mm |
| Outer diameter | 84 mm |
| Inner diameter | 49 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| for OE number | 124 980 04 16 |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut, kingpin (02346)
- 6x Febi Bolt, drive shaft flange (02592)
- 2x Febi Screw (02102)
- 1x Febi Bolt, brake disc (05560)
- 2x Febi Packing Plate, drive shaft flange (02593)
- 1x Febi Circlip (03405)
£34.12
Important compatibility info
| Length | 423 mm |
| Function | Gasket, oil filter housing |
| Type | Gasket, oil filter housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.12
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 261 mm |
| Outer diameter | 128 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.12
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter | 55 mm |
| Colour | Black |
| Additional Information 2 | with clamps |
| Function | Radiator Hose |
| Extra Description | ProKit |
| Type | Radiator Hose |
| Additional Information | with quick coupling |
| Hose Length | 390 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Radiator Hose (39320)
- 1x Febi Hose Clamp (48355)
£34.12
Important compatibility info
| Function | Gas Spring, boot/cargo area |
| Housing length | 198 mm |
| Housing Diameter | 18 mm |
| Length | 371 mm |
| Placement on Vehicle | both sides |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Stroke | 99 mm |
| Mounting points diameter | 17.8 mm |
| Eject Force | 480 N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.12
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Type | Ignition Coil |
| for OE number | MN195616 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.12
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.13
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 279 mm |
| Thickness | 55.8 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.13
Important compatibility info
| Inner diameter | 10 mm. 8 mm |
| Function | Vibration Damper, v-ribbed belt |
| Length | 104 mm |
| Type | Vibration Damper, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.13
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023