Important compatibility info
Number of Parts | 3 -part |
Hub Profile | 26.1 x 23 |
Outer diameter | 250 mm |
Function | Clutch Kit |
Number of Teeth | 23 |
Type | Clutch Kit |
Important compatibility info
Additional Information | with gaskets/seals |
Additional Information 2 | with sensor |
Opening Temperature | 112 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Housing material | Plastic |
Function | Thermostat, coolant |
Important compatibility info
Number of Parts | 3 -part |
Hub Profile | 24.2 x 21.8 |
Outer diameter | 240 mm |
Engine Version | for engines with dual-mass flywheel |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 23 |
Important compatibility info
Number of Teeth | 22 |
Engine Version | for engines with dual-mass flywheel |
Number of Parts | 3 -part |
Hub Profile | 29.3 x 26.6 |
Outer diameter | 228 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Additional Information 2 | Self-adjusting |
Important compatibility info
Number of Parts | 3 -part |
Hub Profile | 23.1 x 20.1 |
Outer diameter | 228 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 20 |
Important compatibility info
Hub Profile | 22.7 x 19.2 |
Outer diameter | 230 mm |
Function | Clutch Kit |
Number of Teeth | 20 |
Type | Clutch Kit |
Important compatibility info
Number of belts | 2 |
Width 2 | 17 mm |
Width 1 | 20 mm |
Function | Water Pump & Timing Belt Kit |
Type | Water Pump & Timing Belt Kit |
Number of Teeth 1 | 130 |
Number of Teeth 2 | 58 |
Important compatibility info
Number of Parts | 2 -part |
Hub Profile | 20.5 x 18.3 |
Outer diameter | 215 mm |
Function | Clutch Kit |
Engine Version | for engines with dual-mass flywheel |
Type | Clutch Kit |
Number of Teeth | 24 |
Important compatibility info
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Brake System | MERITOR D-LISA |
Important compatibility info
Function | Clutch Kit |
Type | Clutch Kit |
Additional Information | with central slave cylinder |
Number of Teeth | 23 |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 8 |
Rotation Direction | Clockwise rotation |
Rated Power | 0.95 kW |
Number of mounting bores | 3 |
Number of Thread Bores | 2 |
Function | Starter |
Type | Starter |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Trailing Arm |
Type | Control/Trailing Arm, wheel suspension |
Length | 610 mm |
Important compatibility info
Function | Tie Rod |
Type | Tie Rod |
Important compatibility info
Length 2 | 735 mm |
Length 3 | 975 mm |
Length 4 | 716 mm |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Length 1 | 1010 mm |
Important compatibility info
Function | Cable Pull, manual transmission |
Length 4 | 650 mm |
Length 2 | 831 mm |
Length 3 | 978 mm |
Type | Cable Pull, manual transmission |
Length 1 | 1141 mm |
Important compatibility info
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 23 |
Additional Information | with central slave cylinder |
Replaces | HKT1578 |
Important compatibility info
Number of Holes | 5 |
Outer diameter | 299 mm |
Minimum thickness | 22 mm |
Centering Diameter | 98 mm |
Brake Disc Thickness | 24 mm |
Height | 67 mm |
Rotor Style | perforated/vented |
Function | Brake Disc |
Surface | Coated |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 2 |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Rotation Direction | Clockwise rotation |
Rated Power | 1.1 kW |
Number of mounting bores | 2 |
Number of Thread Bores | 1 |
Function | Starter |
Type | Starter |
Manufacturer Restriction | Bosch |
Important compatibility info
Type | Clutch Kit |
Number of Teeth | 21 |
Hub Profile | 29.8 x 25.3 |
Outer diameter | 258 mm |
Function | Clutch Kit |
Number of Parts | 3 -part |
Important compatibility info
Function | Charge Air Hose |
Port / Connector type | OE PUSH CLIP |
Material | Silicone |
Colour | Black |
Inner diameter 2 | 54 mm |
Inner diameter 1 | 54 mm |
Type | Charge Air Hose |
Important compatibility info
Bearing Code | Gen 2 |
Function | Wheel Bearing Kit |
Inner diameter 1 | 45 mm |
Placement on Vehicle | Rear Axle |
Outer diameter 1 | 189 mm |
Type | Wheel Bearing Kit |
Important compatibility info
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Impeller Diameter | 63.5 mm |
Important compatibility info
Additional Information | with central slave cylinder |
Number of Teeth | 22 |
Function | Clutch Kit |
Type | Clutch Kit |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 543 mm |
External Teeth, Wheel Side | 30 |
External Teeth, Diff.Side | 27 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Number of Holes | 5 |
Outer diameter | 332 mm |
Brake Disc Thickness | 30 mm |
Height | 62 mm |
Minimum thickness | 28.5 mm |
Centering Diameter | 75 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Rotor Style | Vented |
Placement on Vehicle | Front Axle |
Number of mounting bores | 1 |
Important compatibility info
Inner diameter 1 | 45 mm |
Material | Silicone |
Function | Charge Air Hose |
Type | Charge Air Hose |
Inner diameter 2 | 45 mm |
Colour | Black |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
Additional Information 2 | with sensor |
Opening Temperature | 87 °C |
Additional Information | with gaskets/seals |
Housing Type | with housing |
Housing material | Aluminium |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Important compatibility info
Number of Parts | 2 -part |
Number of Teeth | 21 |
Hub Profile | 24.6 x 21.2 |
Outer diameter | 227 mm |
Engine Version | for engines with dual-mass flywheel |
Function | Clutch Kit |
Type | Clutch Kit |
Additional Information 2 | Self-adjusting |
Important compatibility info
Function | Drive Shaft |
External Teeth, Wheel Side | 42 |
Length | 463 mm |
Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1396)
Important compatibility info
External Teeth, Diff.Side | 25 |
Number of Teeth, ABS ring | 48 |
External Teeth, Wheel Side | 25 |
Length | 685 mm |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Type | Drive Shaft |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 949 mm |
Function | Drive Shaft |
External Teeth, Wheel Side | 26 |
External Teeth, Diff.Side | 24 |
Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1267)
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1330)
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 822 mm |
External Teeth, Wheel Side | 35 |
External Teeth, Diff.Side | 41 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Function | Tie Rod |
for OE number | 5001868366 |
Pipe Diameter | 42 mm |
Length | 941 mm |
Type | Tie Rod |
Adjustable | Adjustable on one side |
Thread Size | M24x1.5 |
Important compatibility info
Placement on Vehicle | Front Axle |
Bearing Code | Gen 2 |
Outer diameter 1 | 136 mm |
Width 1 | 76 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Important compatibility info
Length | 841 mm |
External Teeth, Wheel Side | 30 |
External Teeth, Diff.Side | 27 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 657 mm |
Internal Teeth, wheel side | 37 |
External Teeth, Diff.Side | 41 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 999 mm |
Internal Teeth, wheel side | 37 |
External Teeth, Diff.Side | 41 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Length | 919 mm |
Type | Centre Rod Assembly |
Pipe Diameter | 41 mm |
Rod/Strut | Push Rod |
Function | Centre Rod Assembly |
Important compatibility info
Water pump impeller material | Metal |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 388 mm |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | FCA8047 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
Additional Information 2 | Self-adjusting |
Hub Profile | 26.1 x 23 |
Outer diameter | 250 mm |
Engine Version | for engines with dual-mass flywheel |
Function | Clutch Kit |
Number of Parts | 3 -part |
Number of Teeth | 23 |
Type | Clutch Kit |
Important compatibility info
Function | Drive Shaft |
External Teeth, Diff.Side | 29 |
Type | Drive Shaft |
External Teeth, Wheel Side | 30 |
Transmission Type | Electrical transmission |
Length | 868 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1271)
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1273)
Important compatibility info
Function | Tie Rod |
Type | Tie Rod |
Length | 1603 mm |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 646 mm |
External Teeth, Wheel Side | 38 |
External Teeth, Diff.Side | 37 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Number of Parts | 3 -part |
Outer diameter | 275 mm |
Hub Profile | 25.6 x 23.1 |
Type | Clutch Kit |
Function | Clutch Kit |
Number of Teeth | 24 |
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Pipe Diameter | 50 mm |
Steering arm type | Trailing Arm |
Length | 523 mm |
Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
Material | Silicone |
Inner diameter 1 | 49 mm |
Colour | Black |
Inner diameter 2 | 49 mm |
Function | Charge Air Hose |
Port / Connector type | OE PUSH CONNECTOR |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Number of Parts | 3 -part |
Type | Clutch Kit |
Hub Profile | 22.1 x 20.3 |
Outer diameter | 225 mm |
Engine Version | for engines with dual-mass flywheel |
Function | Clutch Kit |
Number of Teeth | 28 |
Important compatibility info
Function | Drive Shaft |
Type | Drive Shaft |
External Teeth, Diff.Side | 31 |
External Teeth, Wheel Side | 31 |
Placement on Vehicle | Front Axle Left |
Length | 590 mm |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 643 mm |
External Teeth, Wheel Side | 29 |
External Teeth, Diff.Side | 27 |
Type | Drive Shaft |
Function | Drive Shaft |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023