Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Alternator Charge Current | 105 A |
Belt Pulley Diameter | 53 mm |
Function | Alternator |
Type | Alternator |
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Length | 666 mm |
Diameter | 48 mm |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Trailing Arm |
Important compatibility info
External Teeth, Wheel Side | 30 |
External Teeth, Diff.Side | 27 |
Type | Drive Shaft |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Length | 996 mm |
Additional Information | with intermediate shaft gear |
Important compatibility info
Number of Parts | 3 -part |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 21 |
Additional Information | with central slave cylinder |
Important compatibility info
Length | 645 mm |
Steering arm type | Trailing Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 985 mm |
Internal Teeth, wheel side | 37 |
External Teeth, Diff.Side | 42 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Outer diameter | 348 mm |
Function | Brake Disc |
Centering Diameter | 79 mm |
Minimum thickness | 28 mm |
Type | Brake Disc Rotor |
Height | 77 mm |
Brake Disc Thickness | 30 mm |
Quantity | 1 |
Placement on Vehicle | Front Axle |
Number of Holes | 5 |
Surface | Coated |
Rotor Style | two-part brake disc, Vented |
Replaced by | BBD7002S |
Replaces | BBD4596 |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Rotation Direction | Clockwise rotation |
Rated Power | 1 kW |
Number of mounting bores | 2 |
Number of Thread Bores | 1 |
Function | Starter |
Type | Starter |
Important compatibility info
Length | 782 mm |
External Teeth, Diff.Side | 27 |
Placement on Vehicle | Rear Axle Right |
Function | Drive Shaft |
External Teeth, Wheel Side | 31 |
Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1388)
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1389)
Important compatibility info
Function | Drive Shaft |
Type | Drive Shaft |
Length | 667 mm |
Placement on Vehicle | Rear Axle Left |
External Teeth, Wheel Side | 31 |
External Teeth, Diff.Side | 27 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1388)
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1389)
Important compatibility info
Impeller Diameter | 135 mm |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Number of Seals | 1 |
Number of Wings | 8 |
Height | 86 mm |
Number of Holes | 9 |
Important compatibility info
Number of Teeth | 21 |
Number of Parts | 3 -part |
Function | Clutch Kit |
Number of mounting bores | 3 |
Additional Information | with central slave cylinder |
Type | Clutch Kit |
Important compatibility info
External Teeth, Diff.Side | 32 |
Function | Drive Shaft |
Length | 865 mm |
External Teeth, Wheel Side | 30 |
Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1364)
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1365)
Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 105 A |
Belt Pulley Diameter | 61 mm |
Function | Alternator |
Type | Alternator |
Number of mounting bores | 2 |
Connector / Clamp | B+, D+ |
Important compatibility info
Additional Information | with central slave cylinder |
Function | Clutch Kit |
Number of Teeth | 23 |
Type | Clutch Kit |
Important compatibility info
Hub Profile | 22.1 x 20.2 |
Function | Conversion Set, clutch |
Type | Conversion Set, clutch |
Number of Teeth | 28 |
Important compatibility info
Function | Auxiliary water pump (heating water circuit) |
Port / Connector type | 2 PIN |
Operating Mode | Electronic |
Type | Auxiliary water pump (heating water circuit) |
Voltage | 12 V |
Important compatibility info
Hub Profile | 28.6 x 26.5 |
Outer diameter | 239 mm |
Function | Clutch Kit |
Engine Version | for engines with dual-mass flywheel |
Additional Information 2 | Self-adjusting |
Number of Parts | 2 -part |
Number of Teeth | 26 |
Type | Clutch Kit |
Important compatibility info
Number of Seals | 5 |
Number of Holes | 9 |
Water Pump Pulley Diameter | 106 mm |
Impeller Diameter | 134.5 mm |
Height | 91 mm |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Number of Wings | 12 |
Important compatibility info
Hub Profile | 24.6 x 21.4 |
Outer diameter | 215 mm |
Function | Clutch Kit |
Number of Teeth | 21 |
Type | Clutch Kit |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Rotation Direction | Clockwise rotation |
Rated Power | 2 kW |
Number of mounting bores | 2 |
Number of Thread Bores | 2 |
Function | Starter |
Type | Starter |
Important compatibility info
Additional Information | with central slave cylinder |
Function | Clutch Kit |
Number of Parts | 3 -part |
Type | Clutch Kit |
Number of Teeth | 14 |
Replaced by | HKT1497 |
Important compatibility info
Colour | Black |
Inner diameter 1 | 48 mm |
Material | AEM (Ethylene Acrylate Rubber) |
Inner diameter 2 | 48 mm |
Port / Connector type | HORSE SHOE CLIP |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
Function | Tie Rod |
Type | Tie Rod |
Length | 1385 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Number of Seals | 3 |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Impeller Diameter | 95.5 mm |
Number of Holes | 5 |
Height | 126 mm |
Water Pump Pulley Diameter | 67 mm |
Number of Wings | 7 |
Important compatibility info
Function | Clutch Kit |
Number of Parts | 3 -part |
Replaces | HK5707 |
Type | Clutch Kit |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Colour | Black |
Inner diameter 1 | 59 mm |
Material | PE (Polyethylene) |
Inner diameter 2 | 59 mm |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Length | 568 mm |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Trailing Arm |
Pipe Diameter | 50 mm |
Important compatibility info
Voltage | 12 V |
Number of Ribs | 5 |
Alternator Charge Current | 70 A |
Belt Pulley Diameter | 55 mm |
Function | Alternator |
Plug Type ID | B+;D+ |
Rotation Direction | Clockwise rotation |
Type | Alternator |
Number of mounting bores | 3 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Trailing Arm |
Type | Control/Trailing Arm, wheel suspension |
Length | 666 mm |
Important compatibility info
Length | 673 mm |
Internal Teeth, wheel side | 42 |
Function | Drive Shaft |
Type | Drive Shaft |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
Number of Parts | 3 -part |
Hub Profile | 32 x 25.7 |
Outer diameter | 216 mm |
Function | Clutch Kit |
Number of Teeth | 10 |
Type | Clutch Kit |
Important compatibility info
Function | Clutch Kit |
Number of Teeth | 25 |
Number of Parts | 2 -part |
Type | Clutch Kit |
Important compatibility info
Length | 785 mm |
External Teeth, Diff.Side | 27 |
External Teeth, Wheel Side | 27 |
Type | Drive Shaft |
Placement on Vehicle | Rear Axle Left |
Function | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1346)
Important compatibility info
Function | Clutch Kit |
Type | Clutch Kit |
Important compatibility info
Number of Inlets / Outlets | 3 |
Bolt Hole Circle Diameter | 90 mm |
Number of Wings | 12 |
Height | 90 mm |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Important compatibility info
Placement on Vehicle | Front Axle |
Type | Tie Rod |
Function | Tie Rod |
Pipe Diameter | 62 mm |
Length | 1022 mm |
Important compatibility info
Outer diameter | 300 mm |
Function | Brake Disc |
Centering Diameter | 62 mm |
Minimum thickness | 9 mm |
Number of Holes | 5 |
Quantity | 1 |
Brake Disc Thickness | 11 mm |
Height | 101.5 mm |
Additional Information 2 | with groove, with ABS sensor ring, with wheel bearing |
Surface | Coated |
Rotor Style | Solid |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Trailing Arm |
Length | 597 mm |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Rotation Direction | Clockwise rotation |
Rated Power | 2 kW |
Number of mounting bores | 2 |
Function | Starter |
Type | Starter |
Replaced by | BST2312 |
Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Alternator Charge Current | 150 A |
Belt Pulley Diameter | 52 mm |
Function | Alternator |
Type | Alternator |
Important compatibility info
Plug Type ID | L,S,B+ |
Connector Shape | Oval |
Voltage | 12 V |
Number of Ribs | 2 |
Alternator Charge Current | 75 A |
Belt Pulley Diameter | 80 mm |
Function | Alternator |
Type | Alternator |
Replaced by | BBA2300 |
Important compatibility info
Type | Tie Rod |
Function | Tie Rod |
Important compatibility info
Voltage | 12 V |
Number of Ribs | 5 |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 120 A |
Belt Pulley Diameter | 56 mm |
Connector Shape | D Shape |
Function | Alternator |
Type | Alternator |
Number of mounting bores | 4 |
Connector / Clamp | B+/L/DFM |
Important compatibility info
Friction Surface Width | 225 mm |
Inner Brake Drum Diameter | 420 mm |
Placement on Vehicle | Rear Axle |
Number of Holes | 10 |
Hub Bore Diameter | 290 mm |
Total Br. Drum Height | 287 mm |
Type | Brake Drum |
Function | Brake Drum |
Important compatibility info
Number of Holes | 11 |
Number of Ribs | 8 |
Impeller Diameter | 112 mm |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Number of Wings | 5 |
Water Pump Pulley Diameter | 150 mm |
Important compatibility info
Number of Parts | 3 -part |
Hub Profile | 24.6 x 21.2 |
Function | Clutch Kit |
Number of Teeth | 21 |
Additional Information | with central slave cylinder |
Type | Clutch Kit |
Number of mounting bores at central releaser | 3 |
Important compatibility info
Function | Drive Shaft |
Type | Drive Shaft |
External Teeth, Diff.Side | 37 |
External Teeth, Wheel Side | 38 |
Length | 1025 mm |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Number of Wings | 7 |
Impeller Diameter | 119 mm |
Number of Holes | 6 |
Number of Seals | 1 |
Function | Water Pump, engine cooling |
Water Pump Pulley Diameter | 99 mm |
Type | Water Pump, engine cooling |
Number of Ribs | 9 |
Height | 127 mm |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023