Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Length | 1950 mm |
| Paired article numbers | 106481 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1857 mm |
| Function | Sensor, wheel speed |
| Weight | 0.059 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.43
Important compatibility info
| Weight | 0.25 kg |
| Outer diameter | 70 mm |
| Function | Tensioner Pulley, timing belt |
| Material | Plastic |
| Width | 32 mm |
| Type | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.771 kg |
| Material | Cast Aluminium |
| Number of Teeth | 19 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| for OE number | 045 121 011 BX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Number of Connectors / Ports | 3 |
| Weight | 0.16 kg |
| Type | Ignition Coil |
| Function | Ignition Coil |
| for OE number | MN195805 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Material | PP (Polypropylene) |
| Function | Expansion Tank, coolant |
| Weight | 0.54 kg |
| Number of Connectors / Ports | 2 |
| Type | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Additional Information 2 | without lid |
| for OE number | 13 04 017 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 2.604 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with fastening/mounting material |
| Extra Description | ProKit |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (06524)
- 1x Febi Holder, control arm mounting (06634)
- 2x Febi Springwasher (01075)
- 2x Febi Washer (01965)
- 2x Febi Nut (01031)
- 1x Febi Mounting, control/trailing arm (06559)
- 1x Febi Mounting, control/trailing arm (06561)
- 3x Febi Clamping Bolt, ball joint (06884)
- 3x Febi Spring Washer (06885)
- 1x Febi Screw (06883)
- 3x Febi Nut (06886)
£35.44
Important compatibility info
| Weight | 0.066 kg |
| Length | 1290 mm |
| Paired article numbers | 171435 |
| Placement on Vehicle | Front Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.69 kg |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.764 kg |
| Outer Length | 1030 mm |
| Inner Length | 623 mm |
| Type | Cable Pull, clutch control |
| Function | Cable Pull, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 102 mm |
| Width | 90 mm |
| Material | Rubber/Metal |
| Outer diameter | 90 mm |
| Thickness | 90 mm |
| Inner diameter | 33 mm |
| Function | Mounting, stabiliser bar |
| Weight | 1.469 kg |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Function | Bush Set, axle beam |
| Weight | 1.867 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (10256)
- 2x Febi Screw (02535)
- 2x Febi Washer (02514)
£35.44
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 485 mm |
| Paired article numbers | 184027 |
| Weight | 0.440 kg |
| Type | Brake Hose |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Function | Thermostat, coolant |
| Weight | 0.284 kg |
| Additional Information | with gasket/seal |
| Opening Temperature | 92 °C |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Hole Spacing | 38 mm |
| Weight | 0.039 kg |
| Length | 52.3 mm |
| Width | 57 mm |
| Number of Connectors / Ports | 2 |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 1.032 kg |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 2 |
| Placement on Vehicle | outer, Front Axle Left |
| Length | 188 mm |
| Thickness | 79 mm |
| Paired article numbers | 48112 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 106633 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1610 mm |
| Function | Sensor, wheel speed |
| Weight | 0.070 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 33 |
| Weight | 2.396 kg |
| Number of Teeth, ABS ring | 43 |
| ABS Ring Diameter | 82 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 605 mm |
| Housing Diameter | 22 mm |
| Eject Force | 670 N |
| Stroke | 233 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 343.5 mm |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.411 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.396 kg |
| Width | 28.5 mm |
| Outer diameter | 62 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Extra Description | febi Plus |
| Weight | 0.175 kg |
| Function | Cable Repair Kit, glow plug |
| Type | Cable Repair Kit, glow plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 30 |
| Internal Teeth, wheel side | 25 |
| Weight | 2.054 kg |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.342 kg |
| Width of castor bearing surface | 34 mm |
| Material | Metal |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Outer diameter | 60 mm |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Weight | 2.160 kg |
| Int. teeth, diff.side, conn.to transm. | 34 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 1.4 kg |
| Placement on Vehicle | Front |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Material | Rubber/Metal, Plastic |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 0.83 kg |
| Type | Mounting, engine |
| Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 2.5 kg |
| Placement on Vehicle | Front Axle |
| Length | 180.1 mm |
| Width | 77.4 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.3 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| External Teeth, Wheel Side | 26 |
| Placement on Vehicle | Front Axle Left, Wheel Side |
| Internal Teeth, wheel side | 29 |
| Thread Size | M8,0 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Weight | 1.380 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 1.54 kg |
| Placement on Vehicle | Right Front |
| Material | Cast Aluminium, Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.092 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1420 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Type | Gas Spring, bonnet |
| Length | 659 mm |
| Function | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Weight | 0.2 kg |
| Placement on Vehicle | Right |
| Mounting points diameter | 18 mm |
| Stroke | 182 mm |
| Eject Force | 390 N |
| Housing Diameter | 20 mm |
| Housing length | 364.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.45
Important compatibility info
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Weight | 1.64 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.45
Important compatibility info
| Length | 162 mm |
| Bolt Head/Nut Design | Male Torx |
| Quality/ Grade | 10.9 |
| Function | Cylinder Head Bolt Set |
| Screw length below head | 147 mm |
| Weight | 2.13 kg |
| External Thread Size | M12 x 1,5 |
| Number of screws | 14 |
| Type | Cylinder Head Bolt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 14x Febi Cylinder Head Bolt (01825)
£35.45
Important compatibility info
| Weight | 0.106 kg |
| Type | Gasket Set, steering gear |
| Function | Gasket Set, steering gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.45
Important compatibility info
| Weight | 3.165 kg |
| Outer diameter | 150 mm |
| Inner diameter | 90 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Width | 45 mm |
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing |
| Bearing Code | 33118 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.45
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 09528 |
| Weight | 2.169 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Replaces | 09525 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.45
Important compatibility info
| Weight | 1.4 kg |
| Outer diameter | 116 mm |
| Thickness | 72 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 98 mm |
| Outer diameter 1 | 59 mm |
| Outer diameter 2 | 42 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.45
Important compatibility info
| Placement on Vehicle | Right |
| Length | 731 mm |
| Weight | 0.2 kg |
| Housing length | 389.5 mm |
| Housing Diameter | 18 mm |
| Eject Force | 210 N |
| Stroke | 311 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.46
Important compatibility info
| Weight | 0.57 kg |
| Function | Exterior Door Handle |
| Colour | Black |
| Paired article numbers | 29164 |
| Material | Metal |
| Placement on Vehicle | Right |
| Type | Exterior Door Handle |
| Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.46
Important compatibility info
| Weight | 0.2 kg |
| External Thread Size | M16 x 1,5 |
| Length | 108 mm |
| Width | 66.8 mm |
| Thickness | 25 mm |
| Function | Hand Feed Pump |
| Type | Hand Feed Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.46
Important compatibility info
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 179122 |
| Weight | 0.04 kg |
| Cable Length | 565 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.47
Important compatibility info
| Material | Sheet Steel |
| Weight | 1.992 kg |
| Paired article numbers | 183093 |
| Placement on Vehicle | Rear Axle Right, Centre |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Additional Information 2 | with bearing |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.47
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
| Material | Sheet Steel |
| Placement on Vehicle | Rear Axle Left, Centre |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 1.992 kg |
| Paired article numbers | 183092 |
| Steering arm type | Trailing Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.47
Important compatibility info
| Weight | 0.77 kg |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.47
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.705 kg |
| Type | Cover Sheet, brake drum |
| Function | Cover Sheet, brake drum |
| Height | 44 mm |
| Outer diameter | 409 mm |
| Inner diameter | 228 mm |
| Paired article numbers | 196031 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.47
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 553 mm |
| Housing Diameter | 19 mm |
| Eject Force | 715 N |
| Stroke | 176 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 282.5 mm |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.327 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 0.066 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 700 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| ABS Ring Diameter | 104 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 48 |
| Weight | 2.858 kg |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| External Teeth, Wheel Side | 38 |
| Internal Teeth, wheel side | 27 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Colour | Black |
| Material | Plastic |
| Function | Exterior Door Handle |
| Paired article numbers | 24874 |
| Placement on Vehicle | Left |
| Type | Exterior Door Handle |
| Weight | 0.440 kg |
| Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Placement on Vehicle | transmission sided |
| Width | 165 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Inner diameter | 93 mm |
| Outer Length | 135 mm |
| Weight | 0.210 kg |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
| Thickness | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 1.8 kg |
| Placement on Vehicle | Front Axle |
| Length | 120 mm |
| Thread Type | with right-hand thread |
| Cone Size | 28.6 mm |
| Internal Thread Size | M26 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Angled Ball Joint / Tie Rod End |
| Function | Angled Ball Joint / Tie Rod End |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023