Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 359 mm |
| Outer diameter | 169 mm |
| Function | Suspension Spring |
| Wire Diameter | 14 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.79
Important compatibility info
| Opening Temperature | 90 °C |
| Outer diameter | 48 mm |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.79
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 173 mm |
| Outer diameter | 106 mm |
| External Teeth, Wheel Side | 38 |
| Seal Diameter | 63 mm |
| Internal Teeth, wheel side | 29 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.79
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with bush |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Cable Length | 1660 mm |
| Resistance | 1185 Ohm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.79
Important compatibility info
| Length | 495 mm |
| Outer diameter | 28 mm |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 18 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M24 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.80
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 38971 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (38968)
- 1x Febi Inner Tie Rod (36505)
£34.80
Important compatibility info
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.80
Important compatibility info
| Additional Information 2 | with filter |
| Width | 62 mm |
| Housing material | Aluminium |
| Function | Pump, fuel pre-supply |
| Length | 105 mm |
| Internal Thread Size | M16 x 1,5 |
| Type | Pump, fuel pre-supply |
| Height | 101 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.80
Important compatibility info
| Width | 32 mm |
| Number of Teeth | 147 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.80
Important compatibility info
| Function | Release Fork, clutch |
| Type | Release Fork, clutch |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.81
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Bush Set, axle beam |
| Outer diameter | 22 mm |
| Type | Bush Set, axle beam |
| Additional Information | with sleeve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw (21393)
- 1x Febi Nut (21395)
- 2x Febi Bush, steering knuckle (21399)
- 1x Febi Guide Sleeve, axle beam mounting (22652)
- 1x Febi Sleeve, control arm mounting (22653)
£34.81
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 1 439 392 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.81
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Additional Information 2 | with fastening material, with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (100702)
- 1x Febi Rolling Bearing, suspension strut support mount (183292)
- 3x Febi Screw (186445)
- 1x Febi Nut (37805)
£34.81
Important compatibility info
| Wear Warning Contact | prepared for wear warning indicator |
| Placement on Vehicle | Rear Axle |
| Length | 121.2 mm |
| Width | 86.1 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.83
Important compatibility info
| Width | 130 mm |
| Outer diameter | 71 mm |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.83
Important compatibility info
| Filter type | In-Line Filter |
| Width | 55 mm |
| Outer diameter | 55 mm |
| Type | Fuel filter |
| Height | 55 mm |
| Function | Fuel filter |
| Pipe Diameter | 7.89 mm |
| Length | 207 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.83
Important compatibility info
| Surface | Coated |
| Rim Hole Number | 4 -Hole |
| Thickness | 38.3 mm |
| Brake Disc Thickness | 17 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Number of mounting bores | 2 |
| Minimum thickness | 15 mm |
| Outer diameter | 257 mm |
| Placement on Vehicle | Front Axle |
| Centering Diameter | 64 mm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.83
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178068 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.83
Important compatibility info
| Additional Information 2 | with ball bearing |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| for OE number | 03 44 544 S1 |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (28117)
- 1x Febi Rolling Bearing, suspension strut support mount (27996)
£34.84
Important compatibility info
| Function | Mounting, stabiliser bar |
| Outer diameter | 89 mm |
| Placement on Vehicle | Rear Axle |
| Length | 172 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.84
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023