Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
| Length | 1603 mm |
Important compatibility info
| Paired article numbers | FCA7588 |
| Material | Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 1021 mm |
| External Teeth, Wheel Side | 31 |
| External Teeth, Diff.Side | 31 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 672 mm |
| External Teeth, Wheel Side | 29 |
| External Teeth, Diff.Side | 39 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 24.2 x 21.8 |
| Outer diameter | 240 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 23 |
Important compatibility info
| Number of Teeth | 23 |
| Hub Profile | 25.9 x 23.1 |
| Outer diameter | 260 mm |
| Function | Clutch Kit |
| Engine Version | for engines with dual-mass flywheel |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 50 mm |
| Steering arm type | Trailing Arm |
| Length | 523 mm |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7596 |
Important compatibility info
| Hub Profile | 24.1 x 21.4 |
| Outer diameter | 228 mm |
| Function | Clutch Kit |
| Number of Parts | 3 -part |
| Number of Teeth | 21 |
| Type | Clutch Kit |
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Diff.Side | 31 |
| Placement on Vehicle | Rear Axle Left |
| External Teeth, Wheel Side | 31 |
| Length | 838 mm |
| Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1340)
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1345)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 36 |
| Transmission Type | Automatic Transmission |
| Number of Teeth, ABS ring | 44 |
| External Teeth, Diff.Side | 32 |
| Length | 592 mm |
| Type | Drive Shaft |
Important compatibility info
| External Teeth, Wheel Side | 30 |
| Type | Drive Shaft |
| Length | 630 mm |
| Diameter 2 | 100 mm |
| Function | Drive Shaft |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Number of Parts | 3 -part |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Hub Profile | 26.1 x 23.1 |
| Number of Teeth | 23 |
| Additional Information | with central slave cylinder |
Important compatibility info
| Hub Profile | 22.7 x 19.2 |
| Outer diameter | 230 mm |
| Function | Clutch Kit |
| Number of Teeth | 20 |
| Type | Clutch Kit |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 5 |
| Outer diameter | 299 mm |
| Minimum thickness | 22 mm |
| Centering Diameter | 98 mm |
| Brake Disc Thickness | 24 mm |
| Height | 67 mm |
| Rotor Style | perforated/vented |
| Function | Brake Disc |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Hub Profile | 25.2 x 22.1 |
| Outer diameter | 230 mm |
| Function | Clutch Kit |
| Number of Teeth | 22 |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
Important compatibility info
| Number of Parts | 2 -part |
| Hub Profile | 20.5 x 18.3 |
| Outer diameter | 215 mm |
| Function | Clutch Kit |
| Engine Version | for engines with dual-mass flywheel |
| Type | Clutch Kit |
| Number of Teeth | 24 |
Important compatibility info
| Type | Clutch Kit |
| Manufacturer Restriction | Borg & Beck Flywheel |
| Function | Clutch Kit |
Important compatibility info
| Number of Parts | 3 -part |
| Type | Clutch Kit |
| Hub Profile | 25 x 22 |
| Function | Clutch Kit |
| Outer diameter | 229 mm |
| Number of Teeth | 14 |
Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 52 mm |
| Adjustable | Adjustable on one side |
| for OE number | 1297572 |
| Length | 1457 mm |
| Thread Size | M24x1.5 |
Important compatibility info
| Hub Profile | 29.8 x 25.5 |
| Outer diameter | 239 mm |
| Function | Clutch Kit |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
| Replaces | HK2249 |
| Number of Teeth | 21 |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| External Teeth, Diff.Side | 27 |
| Number of Teeth, ABS ring | 46 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 27 |
| Length | 967 mm |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1257)
Important compatibility info
| Bearing Code | Gen 2 |
| Function | Wheel Bearing Kit |
| Inner diameter 1 | 45 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter 1 | 189 mm |
| Type | Wheel Bearing Kit |
Important compatibility info
| Function | Water Pump, engine cooling |
| Height | 153 mm |
| Impeller Diameter | 94.5 mm |
| Type | Water Pump, engine cooling |
Important compatibility info
| Number of belts | 2 |
| Width 2 | 17 mm |
| Width 1 | 20 mm |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth 1 | 130 |
| Number of Teeth 2 | 58 |
Important compatibility info
| Type | Clutch Kit |
| Number of Teeth | 21 |
| Hub Profile | 29.8 x 25.3 |
| Outer diameter | 258 mm |
| Function | Clutch Kit |
| Number of Parts | 3 -part |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.1 kW |
| Number of mounting bores | 2 |
| Number of Thread Bores | 1 |
| Function | Starter |
| Type | Starter |
| Manufacturer Restriction | Bosch |
Important compatibility info
| External Teeth, Wheel Side | 38 |
| External Teeth, Diff.Side | 26 |
| Length | 883 mm |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
Important compatibility info
| Length | 933 mm |
| External Teeth, Wheel Side | 28 |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 37 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1357)
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1373)
Important compatibility info
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Parts | 3 -part |
| Number of Teeth | 32 |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Alternator Charge Current | 140 A |
| Belt Pulley Diameter | 50 mm |
| Function | Alternator |
| Type | Alternator |
| Number of mounting bores | 4 |
| Connector / Clamp | B+, D+ |
Important compatibility info
| Type | Drive Shaft |
| External Teeth, Wheel Side | 36 |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Length | 806 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 1024 mm |
| External Teeth, Wheel Side | 31 |
| External Teeth, Diff.Side | 31 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Length | 653 mm |
| Type | Drive Shaft |
| Number of Teeth, ABS ring | 48 |
| External Teeth, Diff.Side | 28 |
| External Teeth, Wheel Side | 30 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1223)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Bearing Code | Gen 2 |
| Outer diameter 1 | 136 mm |
| Width 1 | 76 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 968 mm |
| External Teeth, Wheel Side | 29 |
| External Teeth, Diff.Side | 27 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 31 |
| External Teeth, Wheel Side | 31 |
| Placement on Vehicle | Front Axle Left |
| Length | 590 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 643 mm |
| External Teeth, Wheel Side | 29 |
| External Teeth, Diff.Side | 27 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 23 |
Important compatibility info
| Length | 973 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 24 |
| External Teeth, Wheel Side | 26 |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Impeller Diameter | 63.5 mm |
Important compatibility info
| Length 3 | 2933 mm |
| Length 4 | 2563 mm |
| Function | Cable Pull, manual transmission |
| Length 1 | 2999 mm |
| Length 2 | 2553 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Number of Teeth | 22 |
| Engine Version | for engines with dual-mass flywheel |
| Number of Parts | 3 -part |
| Hub Profile | 29.3 x 26.6 |
| Outer diameter | 228 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Additional Information 2 | Self-adjusting |
Important compatibility info
| Internal Teeth, wheel side | 37 |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 27 |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| Length | 613 mm |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 23.1 x 20.1 |
| Outer diameter | 228 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 20 |
Important compatibility info
| Function | Clutch Kit |
| Number of Teeth | 23 |
| Type | Clutch Kit |
| Additional Information | with central slave cylinder |
Important compatibility info
| Thread Measurement 2 | M24X1.5 |
| Function | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Thread Measurement 1 | M30X1.5 RHT |
| Length | 1358 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 773 mm |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 27 |
| Number of Teeth, ABS ring | 48 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Minimum thickness | 28.4 mm |
| Centering Diameter | 79 mm |
| Rotor Style | Vented |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Number of Holes | 5 |
| Brake Disc Thickness | 30 mm |
| Outer diameter | 348 mm |
| Height | 77 mm |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Replaces | BBD6031S |
| Number of mounting bores | 1 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















































