Important compatibility info
| Function | Clutch Kit |
| Outer diameter | 250 mm |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
| Engine Version | for engines with dual-mass flywheel |
Important compatibility info
| Type | Tie Rod |
| Pipe Diameter | 52 mm |
| Function | Tie Rod |
| Length | 1635 mm |
Important compatibility info
| Length 1 | 1216 mm |
| Function | Cable Pull, manual transmission |
| Length 2 | 929 mm |
| Length 3 | 1297 mm |
| Length 4 | 972 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 27 |
| Length | 660 mm |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 26 |
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 27 |
| Length | 782 mm |
Important compatibility info
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Additional Information 2 | with groove, with ABS sensor ring, with wheel bearing |
| Outer diameter | 300 mm |
| Number of Holes | 5 |
| Height | 81.7 mm |
| Minimum thickness | 9.5 mm |
| Centering Diameter | 52.3 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 11 mm |
| Quantity | 1 |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Length | 1955 mm |
Important compatibility info
| Function | Starter |
| Number of mounting bores | 2 |
| Rated Power | 1.7 kW |
| Rotation Direction | Clockwise rotation |
| Number of Teeth | 10 |
| Voltage | 12 V |
| Type | Starter |
| Manufacturer Restriction | Bosch |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 707 mm |
| External Teeth, Wheel Side | 44 |
| External Teeth, Diff.Side | 42 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Function | Auxiliary water pump (heating water circuit) |
| Port / Connector type | 2 PIN |
| Operating Mode | Electronic |
| Type | Auxiliary water pump (heating water circuit) |
| Voltage | 12 V |
Important compatibility info
| Type | Clutch Kit |
| Function | Clutch Kit |
| Number of Teeth | 23 |
| Additional Information | with central slave cylinder |
Important compatibility info
| Number of Teeth | 10 |
| Type | Clutch Kit |
| Hub Profile | 22.2 x 18.1 |
| Number of Parts | 3 -part |
| Outer diameter | 165 mm |
| Function | Clutch Kit |
Important compatibility info
| Number of Parts | 3 -part |
| Number of Teeth | 21 |
| Hub Profile | 29.7 x 25.5 |
| Type | Clutch Kit |
| Outer diameter | 225 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
Important compatibility info
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
Important compatibility info
| Function | Starter |
| Number of Thread Bores | 2 |
| Number of mounting bores | 4 |
| Rated Power | 2.2 kW |
| Rotation Direction | Clockwise rotation |
| Number of Teeth | 11 |
| Voltage | 12 V |
| Type | Starter |
| Manufacturer Restriction | Valeo |
Important compatibility info
| Number of Parts | 3 -part |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Additional Information | with central slave cylinder |
| Number of Teeth | 26 |
| Replaced by | HKT1172 |
Important compatibility info
| Length | 673 mm |
| Internal Teeth, wheel side | 42 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Function | Drive Shaft |
Important compatibility info
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Length | 1970 mm |
| Pipe Diameter | 52 mm |
| Thread Measurement 1 | M24X1.5 |
Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
| Length | 1740 mm |
Important compatibility info
| Type | Tie Rod |
| Function | Tie Rod |
Important compatibility info
| Number of Parts | 2 -part |
| Hub Profile | 26 x 23.1 |
| Additional Information 2 | Self-adjusting |
| Outer diameter | 240 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 23 |
Important compatibility info
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Number of Wings | 8 |
Important compatibility info
| Number of Parts | 3 -part |
| Number of Teeth | 20 |
| Hub Profile | 22.4 x 20 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
| Number of Teeth | 26 |
Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 26 x 23.6 |
| Outer diameter | 275 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Number of Teeth | 23 |
| Type | Clutch Kit |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Alternator Charge Current | 105 A |
| Belt Pulley Diameter | 48 mm |
| Function | Alternator |
| Type | Alternator |
Important compatibility info
| Number of Wings | 9 |
| Number of Seals | 3 |
| Type | Water Pump, engine cooling |
| Water Pump Pulley Diameter | 113 mm |
| Height | 122 mm |
| Number of Holes | 7 |
| Impeller Diameter | 112 mm |
| Function | Water Pump, engine cooling |
Important compatibility info
| Number of Parts | 3 -part |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 21 |
| Additional Information | with central slave cylinder |
Important compatibility info
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 26 |
Important compatibility info
| Number of Parts | 3 -part |
| Additional Information | with central slave cylinder |
| Number of Teeth | 23 |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Number of Teeth | 24 |
| Number of Parts | 3 -part |
| Hub Profile | 25.6 x 23 |
| Outer diameter | 251 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Number of Parts | 3 -part |
| Number of Teeth | 23 |
| Hub Profile | 24.4 x 21.8 |
| Outer diameter | 228 mm |
| Function | Clutch Kit |
| Engine Version | for engines with dual-mass flywheel |
| Type | Clutch Kit |
Important compatibility info
| External Teeth, Wheel Side | 30 |
| Length | 654 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Number of Teeth, ABS ring | 52 |
| External Teeth, Diff.Side | 31 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Length | 596 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 50 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Additional Information 2 | switchable water pump |
| Impeller Diameter | 70 mm |
| Water Pump Pulley Diameter | 65 mm |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7152 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Length | 585 mm |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 31 |
| External Teeth, Wheel Side | 40 |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Length | 666 mm |
| Diameter | 48 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
Important compatibility info
| Function | Wheel Bearing Kit |
| Bearing Code | Gen 3 |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 1001 mm |
| Additional Information | with intermediate shaft gear |
| Additional Information 2 | with bearing |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 26 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Alternator Charge Current | 105 A |
| Belt Pulley Diameter | 53 mm |
| Function | Alternator |
| Type | Alternator |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7151 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Length | 645 mm |
| Steering arm type | Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Type | Drive Shaft |
| Diameter 2 | 108 mm |
| Function | Drive Shaft |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 660 mm |
| External Teeth, Wheel Side | 42 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1280)
Important compatibility info
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 42 |
| Length | 464 mm |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1396)
Important compatibility info
| Number of Parts | 2 -part |
| Additional Information 2 | Self-adjusting |
| Outer diameter | 238 mm |
| Engine Version | for engines with dual-mass flywheel |
| Hub Profile | 24.5 x 21.3 |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Number of Teeth | 21 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































