Proud to be a UK-based company
Contact us
Important compatibility info
| Thread Type | with right-hand thread |
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M24 x 1,5 |
| Length | 120 mm |
| Cone Size | 30 mm |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
| Internal Thread Size | M30 x 1,5 RHT |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.19
Important compatibility info
| Placement on Vehicle | Lower |
| Outer diameter | 76 mm. 37 mm |
| Thickness | 118 mm. 41 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| External Thread Size | M8 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.19
Important compatibility info
| Cable Length | 1605 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 106623 |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.19
Important compatibility info
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber, driver cab suspension |
| Pipe Diameter | 53 mm. 40 mm |
| Min. Length | 195 mm |
| Max. Length | 225 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting points diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.19
Important compatibility info
| ABS Ring Diameter | 104 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 48 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| External Teeth, Wheel Side | 38 |
| Internal Teeth, wheel side | 27 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.19
Important compatibility info
| Length | 100 mm |
| Inner diameter | 15.7 mm |
| Outer diameter | 75 mm |
| Material | Rubber/Metal |
| Type | Bushing, leaf spring |
| Function | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.19
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Surface | Coated |
| Thickness | 40 mm |
| Outer diameter | 245 mm |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle |
| Bolt Hole Circle Diameter | 108 mm |
| Brake Disc Thickness | 10 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.20
Important compatibility info
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.21
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 44271 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.22
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 44270 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.22
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Brake Disc Thickness | 11 mm |
| Outer diameter | 280 mm |
| Thickness | 40.8 mm |
| Placement on Vehicle | Rear Axle |
| Rotor Style | Solid |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 108 mm |
| Minimum thickness | 9 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.23
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 84 mm |
| Outer diameter | 84 mm |
| Inner diameter | 45 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 112 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Hub (45000)
- 1x Febi Wheel Bearing (39827)
- 1x Febi Circlip (03405)
- 1x Febi Axle Bolt, drive shaft (40000)
- 1x Febi Cap, wheel bearing (04947)
£35.23
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Steering | with tie rod end |
| Function | Tie Rod |
| Additional Information | with fastening/mounting material |
| External Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (37331)
- 1x Febi Inner Tie Rod (30654)
- 1x Febi Screw (37329)
£35.24
Important compatibility info
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Width | 56.6 mm |
| Length | 155.7 mm |
| Wear Warning Contact | incl. wear warning contact |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.25
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 157 mm |
| Width | 62 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.25
Important compatibility info
| Width | 16 mm |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Number of Teeth | 116 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.25
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.26
Important compatibility info
| Material | Metal |
| Thickness | 0.4 mm |
| Type | Gasket, cylinder head |
| Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.26
Important compatibility info
| Bore Diameter | 23.81 mm |
| Function | Slave Cylinder, clutch |
| Fill Medium | Brake Fluid |
| Type | Slave Cylinder, clutch |
| for OE number | 002 295 13 07 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.26
Important compatibility info
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Sheet Steel |
| Paired article numbers | 42157 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.27
Important compatibility info
| Inner diameter | 19.8 mm |
| Function | Mounting, control/trailing arm |
| Paired article numbers | 175977 |
| Additional Information | with holder |
| Material | Rubber/Metal |
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | Front Axle Left, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.27
Important compatibility info
| Surface | PTFE (Polytetrafluorethylene) coated |
| Width | 10 mm |
| Number of Teeth | 53 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
| Units / Pulleys | Oil pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.27
Important compatibility info
| Length | 240 mm |
| Valve stem diameter | 9.470 mm |
| Valve head diameter | 42.45 mm |
| Notches / Holes Number | 1 |
| Type | Intake Valve |
| Function | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.29
Important compatibility info
| Placement on Vehicle | Rear, Lower |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.29
Important compatibility info
| Length | 103 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, pneumatic suspension level |
| Type | Sensor, pneumatic suspension level |
| Hole Spacing | 40 mm. 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.30
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 172825 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.30
Important compatibility info
| Type | Sensor, fuel pressure |
| Number of Connectors / Ports | 3 |
| External Thread Size | M10 x 1 |
| Function | Sensor, fuel pressure |
| for OE number | 13 53 8 643 665 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.31
Important compatibility info
| Outer diameter | 27 mm |
| Opening Temperature | 83 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.32
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 163.5 mm |
| Width | 54 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 16.5 mm |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.32
Important compatibility info
| Paired article numbers | 178083 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Left |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.32
Important compatibility info
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178082 |
| Type | Brake Caliper |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.32
Important compatibility info
| Placement on Vehicle | Right Front |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Replaces | 07928 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.32
Important compatibility info
| Placement on Vehicle | Right, Rear |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 175126 |
| Function | Control/Trailing Arm, wheel suspension |
| Rod/Strut | Push Rod |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Length | 432 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.32
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Rod/Strut | Push Rod |
| Steering arm type | Control Arm |
| Paired article numbers | 175127 |
| Inner diameter | 12 mm |
| Length | 432 mm |
| Material | Aluminium |
| Placement on Vehicle | Left, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.32
Important compatibility info
| Placement on Vehicle | Left Rear |
| Operating Mode | Electric |
| Number of Connectors / Ports | 7 |
| Lock System | with double sealing |
| Additional Information | with adjuster |
| Paired article numbers | 178833 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.34
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 7 |
| Lock System | with double sealing |
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Paired article numbers | 178832 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.34
Important compatibility info
| Placement on Vehicle | Left, Centre, Rear Axle |
| Material | Rubber/Metal |
| Outer diameter | 70.4 mm |
| Thickness | 60 mm |
| Inner diameter | 12.5 mm |
| Paired article numbers | 181385 |
| Inner diameter 2 | 15 mm |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.34
Important compatibility info
| Placement on Vehicle | Right, Centre, Rear Axle |
| Inner diameter | 12.5 mm |
| Thickness | 60 mm |
| Outer diameter | 70.2 mm |
| Material | Rubber/Metal |
| Paired article numbers | 181383 |
| Inner diameter 2 | 15 mm |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.34
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (17865)
- 1x Febi Rolling Bearing, suspension strut support mount (17866)
£35.35
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.35
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 20 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Shoe Set, parking brake |
| Additional Information | with fastening/mounting material |
| Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.35
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 1105 mm |
| Paired article numbers | 38369 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.35
Important compatibility info
| Function | Repair Kit, clutch slave cylinder |
| Type | Repair Kit, clutch slave cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.35
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Front, Rear |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (26128)
- 2x Febi Mounting, control/trailing arm (26127)
£35.35
Important compatibility info
| Friction Lining Material | Plastic |
| Material | Cast Aluminium |
| for OE number | SH03-12-670A |
| Type | Guide, timing chain |
| Function | Guide, timing chain |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.35
Important compatibility info
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 179133 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.35
Important compatibility info
| Placement on Vehicle | Interior Door Panel, Driver side |
| Combi Switch Function | Mirror Adjustment, Window Regulator |
| Function | Multi-Function Switch |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 14 |
| Type | Multi-Function Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.36
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182337 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.36
Important compatibility info
| Brake caliper piston diameter | 60 mm |
| Function | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182336 |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.36
Important compatibility info
| Additional Information 2 | with piston clip |
| Placement on Vehicle | Rear Axle |
| Length | 123.1 mm |
| Width | 43.2 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.37
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023