Important compatibility info
| External Teeth, Wheel Side | 30 |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Diff.Side | 24 |
| Length | 592 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1384)
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1387)
Important compatibility info
| Additional Information | with central slave cylinder |
| Number of Teeth | 21 |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Type | Tie Rod |
| Length | 1658 mm |
| Function | Tie Rod |
| Pipe Diameter | 52 mm |
Important compatibility info
| Type | Centre Rod Assembly |
| Pipe Diameter | 62 mm |
| Rod/Strut | Push Rod |
| Thread Measurement 1 | M24X1.5 |
| Length | 1784 mm |
| Function | Centre Rod Assembly |
Important compatibility info
| Number of Teeth | 23 |
| Outer diameter | 203 mm |
| Number of Parts | 3 -part |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Length | 1950 mm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 60 mm |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Length | 525 mm |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | FCA8133 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Paired article numbers | FCA8132 |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Length | 525 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Number of Teeth | 10 |
| Hub Profile | 29 x 23 |
| Outer diameter | 280 mm |
| Function | Clutch Kit |
| Replaces | HK2487 |
| Type | Clutch Kit |
| Number of Parts | 3 -part |
Important compatibility info
| Function | Alternator |
| Belt Pulley Diameter | 55 mm |
| Alternator Charge Current | 150 A |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Connector / Clamp | B+, D+ |
| Number of mounting bores | 4 |
| Type | Alternator |
Important compatibility info
| Hub Profile | 25.1 x 22.1 |
| Function | Conversion Set, clutch |
| Number of Teeth | 14 |
| Type | Conversion Set, clutch |
Important compatibility info
| Number of Parts | 2 -part |
| Hub Profile | 25 x 22.1 |
| Outer diameter | 228 mm |
| Function | Clutch Kit |
| Number of Teeth | 14 |
| Type | Clutch Kit |
Important compatibility info
| Number of Teeth | 24 |
| Hub Profile | 25.6 x 23 |
| Outer diameter | 239 mm |
| Function | Clutch Kit |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
Important compatibility info
| Outer diameter | 228 mm |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Hub Profile | 22.1 x 20.3 |
| Replaced by | HK2765 |
Important compatibility info
| Water pump impeller material | Metal |
| Type | Water Pump, engine cooling |
| Housing Type | with housing |
| Additional Information 2 | Thermostat fitted in water pump |
| Function | Water Pump, engine cooling |
Important compatibility info
| Function | Thermostat, coolant |
| Housing material | Plastic |
| Opening Temperature | 105 °C |
| Replaced by | BBT263 |
| Type | Thermostat, coolant |
Important compatibility info
| Type | Clutch Kit |
| Function | Clutch Kit |
| Hub Profile | 26 x 23 |
| Manufacturer Restriction | Borg & Beck Flywheel |
Important compatibility info
| Additional Information 2 | with thermal management module |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Housing material | Plastic |
| Function | Thermostat, coolant |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Function | Alternator |
| Type | Alternator |
| Belt Pulley Diameter | 48 mm |
| Alternator Charge Current | 80 A |
Important compatibility info
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
| Number of Teeth | 23 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















