Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Number of Teeth | 24 |
| Seal Material | Paper |
| Water pump impeller material | Metal |
| Weight | 0.950 kg |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 2.5 kg |
| Placement on Vehicle | Front Axle |
| Length | 400 mm |
| Outer diameter | 171 mm |
| Function | Suspension Spring |
| Wire Diameter | 14 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 1.95 kg |
| Placement on Vehicle | Front Axle |
| Length | 313 mm |
| Outer diameter | 170 mm |
| Function | Suspension Spring |
| Wire Diameter | 12.5 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| for OE number | 3093100 |
| Function | Repair Kit, clutch slave cylinder |
| Weight | 0.134 kg |
| Type | Repair Kit, clutch slave cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.5 kg |
| Type | Air Suspension Valve |
| Function | Air Suspension Valve |
| Internal Thread Size | M27 x 1, M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Outer diameter | 100 mm |
| Placement on Vehicle | Front |
| Type | Hinge, driver cab |
| Length | 121.5 mm |
| Material | Rubber/Metal |
| Weight | 1.664 kg |
| Inner diameter | 25 mm |
| Function | Hinge, driver cab |
| Replaces | 21773 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 0.41 kg |
| Placement on Vehicle | Left Front |
| Paired article numbers | 08876 |
| Function | Door Seal |
| Type | Door Seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Length | 138 mm |
| Surface | Phosphatized |
| Thread Length | 109 mm |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 11.9 |
| Shaft Length | 14 mm |
| Type | Centering Bolt, crankshaft pulley |
| Function | Centering Bolt, crankshaft pulley |
| Weight | 0.410 kg |
| Bolt / Nut Version | with lockwasher |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Additional Information 2 | with quick couplers |
| Function | Radiator Hose |
| Cooling Hose | from engine to water pump |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Placement on Vehicle | Centre right |
| Type | Radiator Hose |
| Weight | 0.277 kg |
| Hose Length | 200 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Type | Adaptor, electric filament |
| Weight | 0.305 kg |
| Function | Adaptor, electric filament |
| Length | 1200 mm |
| DIN / ISO | ISO 1185 |
| Number of Connectors / Ports | 7 |
| Paired article numbers | 48613 |
| Version | OE Standard |
| Additional Information 2 | with plug |
| Connecting plug material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 0.326 kg |
| Width of castor bearing surface | 25 mm |
| Material | Metal |
| Outer diameter | 65 mm |
| Number of Ribs | 6 |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 0.38 kg |
| Internal Thread Size | M14 x 1,5 |
| Length | 90 mm |
| Width | 67 mm |
| Thickness | 81 mm |
| Operating Mode | Mechanical |
| Mounting points diameter | 7 mm |
| Type | Fuel Pump |
| Function | Fuel Pump |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Internal Thread Size | M6 x 1 |
| Function | Door Lock |
| Type | Door Lock |
| Weight | 0.4 kg |
| Paired article numbers | 177320 |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| External Thread Size | M24 x 1,5 |
| External Teeth, Wheel Side | 29 |
| Type | Joint Kit, drive shaft |
| Weight | 3.180 kg |
| Seal Diameter | 56 mm |
| Internal Teeth, wheel side | 36 |
| Length | 174 mm |
| Function | Joint Kit, drive shaft |
| Outer diameter | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 0.790 kg |
| Placement on Vehicle | Left |
| Length | 874 mm |
| Housing Diameter | 22 mm |
| Eject Force | 260 N |
| Stroke | 404 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Extra Description | febi Plus |
| Function | Clock Spring, airbag |
| Number of Connectors / Ports | 8. 4 |
| Weight | 0.149 kg |
| Type | Clock Spring, airbag |
| Colour | Black |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 1.432 kg |
| Type | Tie Rod |
| Function | Tie Rod |
| External Thread Size | M16 x 1,5, M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (184891)
- 1x Febi Inner Tie Rod (184263)
£36.47
Important compatibility info
| Weight | 0.768 kg |
| Placement on Vehicle | Front |
| Function | Repair Kit, driver cab suspension |
| Type | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bush, driver cab suspension (09219)
- 2x Febi Joint Bearing, driver cab suspension (01820)
- 2x Febi Spacer, driver cab stabiliser (09460)
- 2x Febi Spacer, driver cab stabiliser (09461)
- 2x Febi Screw (16287)
- 4x Febi Seal Ring (16288)
- 2x Febi Washer (02350)
£36.47
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | without electric motor |
| Operating Mode | Electric |
| Paired article numbers | 193249 |
| Weight | 0.9 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Weight | 3.229 kg |
| Paired article numbers | 176056 |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023