Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.44 kg |
| Number of Connectors / Ports | 2 |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.40
Important compatibility info
| Weight | 0.27 kg |
| Function | Ignition Coil |
| Type | Ignition Coil |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.40
Important compatibility info
| Weight | 0.944 kg |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with bearing |
| Material | Sheet Steel |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper, Front |
| Additional Information | with fastening/mounting material |
| External Thread Size | M12 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (179415)
- 2x Febi Screw (21477)
- 2x Febi Washer (40408)
- 2x Febi Nut (34653)
£36.41
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 196812 |
| Weight | 3.125 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 36 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.41
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 196811 |
| Weight | 3.125 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 36 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.41
Important compatibility info
| Weight | 1.526 kg |
| Placement on Vehicle | Rear Axle |
| Length | 130.1 mm |
| Width | 55.2 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.42
Important compatibility info
| Weight | 0.055 kg |
| Number of Connectors / Ports | 3 |
| Function | Knock Sensor |
| Type | Knock Sensor |
| for OE number | 06A 905 377 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.42
Important compatibility info
| Additional Information 2 | with piston clip |
| Weight | 0.542 kg |
| Placement on Vehicle | Front Axle |
| Length | 156.4 mm |
| Width | 74.2 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm. 19.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.42
Important compatibility info
| Weight | 0.049 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 785 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| External Teeth, Wheel Side | 26 |
| Internal Teeth, wheel side | 32 |
| Weight | 2.876 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 173596 |
| Number of Connectors / Ports | 2 |
| Weight | 0.045 kg |
| Cable Length | 625 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Weight | 0.21 kg |
| Outer diameter | 33 mm |
| Opening Temperature | 89 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Weight | 1.020 kg |
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (27136)
- 1x Febi Screw Plug, oil sump (21096)
- 1x Febi Filter, cabin air (17553)
- 1x Febi Air Filter (12765)
- 4x Febi Spark Plug (13462)
£36.43
Important compatibility info
| Weight | 0.16 kg |
| Operating Mode | Mechanical |
| Function | Tensioner Lever, v-ribbed belt |
| Type | Tensioner Lever, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Weight | 0.66 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 29 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Function | Joint Kit, drive shaft |
| Weight | 2.960 kg |
| Type | Joint Kit, drive shaft |
| Placement on Vehicle | Front Axle, Wheel Side |
| External Thread Size | M26 x 1,5 |
| Internal Teeth, wheel side | 34 |
| Seal Diameter | 68 mm |
| External Teeth, Wheel Side | 30 |
| Length | 148 mm |
| Outer diameter | 94 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with bush |
| Number of Connectors / Ports | 2 |
| Resistance | 1250 Ohm |
| Cable Length | 1640 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Weight | 0.10 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Weight | 0.41 kg |
| Function | Timing Chain |
| Timing Chain Size | G68VH |
| Number of Chain Links | 74 |
| Chain Type | Simplex, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
| Placement on Vehicle | Right |
| Replaces | 40275 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Inner diameter | 50 mm |
| Weight | 0.299 kg |
| Outer diameter 1 | 66 mm |
| Outer diameter | 59 mm |
| Wall Thickness | 4.5 mm |
| Function | Charge Air Hose |
| Inner diameter 1 | 57 mm |
| Placement on Vehicle | Charge Air Cooler, Right |
| Type | Charge Air Hose |
| Additional Information 2 | with clamp |
| Turbocharger line | Turbocharger to charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Eject Force | 375 N |
| Placement on Vehicle | both sides |
| Length | 590 mm |
| Weight | 0.2 kg |
| Housing Diameter | 18 mm |
| Stroke | 228 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 6 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 323 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023