Important compatibility info
| Function | Clutch Kit |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
Important compatibility info
| Function | Centre Rod Assembly |
| Pipe Diameter | 60 mm |
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Length | 1921 mm |
Important compatibility info
| Hub Profile | 24.7 x 21 |
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
| Number of Teeth | 21 |
Important compatibility info
| Function | Alternator |
| Belt Pulley Diameter | 55 mm |
| Alternator Charge Current | 120 A |
| Number of Ribs | 5 |
| Voltage | 12 V |
| Type | Alternator |
Important compatibility info
| Wishbone Angle Measurement | 47 ° |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 46 mm |
| Steering arm type | Triangular Control Arm (CV) |
| Length | 659 mm |
Important compatibility info
| Plug Type ID | LIN,B+ |
| Function | Alternator |
| Manufacturer Restriction | Bosch |
| Connector Shape | D Shape |
| Belt Pulley Diameter | 54 mm |
| Rotation Direction | Clockwise rotation |
| Alternator Charge Current | 150 A |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Type | Alternator |
Important compatibility info
| Wishbone Angle Measurement | 50 ° |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 48 mm |
| Steering arm type | Triangular Control Arm (CV) |
Important compatibility info
| Length | 1030 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 28 |
| External Teeth, Wheel Side | 40 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Height | 106 mm |
| Number of Ribs | 2 |
| Number of Holes | 7 |
| Number of Wings | 6 |
| Number of Seals | 1 |
| Type | Water Pump, engine cooling |
| Water Pump Pulley Diameter | 142 mm |
| Function | Water Pump, engine cooling |
Important compatibility info
| Hub Profile | 32 x 26 |
| Function | Clutch Kit |
| Number of Teeth | 10 |
| Type | Clutch Kit |
| Number of Parts | 3 -part |
Important compatibility info
| Function | Starter |
| Number of Thread Bores | 2 |
| Number of mounting bores | 2 |
| Rated Power | 2.2 kW |
| Rotation Direction | Clockwise rotation |
| Number of Teeth | 10 |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
Important compatibility info
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
| Number of Teeth | 20 |
Important compatibility info
| Function | Conversion Set, clutch |
| Number of Teeth | 22 |
| Type | Conversion Set, clutch |
Important compatibility info
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Important compatibility info
| Hub Profile | 28.9 x 23.2 |
| Outer diameter | 254 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 10 |
| Number of Parts | 3 -part |
Important compatibility info
| Wishbone Angle Measurement | 49 ° |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 46 mm |
| Steering arm type | Triangular Control Arm (CV) |
| Length | 622 mm |
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7569 |
| Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
| Steering arm type | Triangular Control Arm (CV) |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Length | 680 mm |
Important compatibility info
| Hub Profile | 25.4 x 22.8 |
| Outer diameter | 225 mm |
| Function | Clutch Kit |
| Number of Teeth | 24 |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
Important compatibility info
| Hub Profile | 24.7 x 21.1 |
| Function | Conversion Set, clutch |
| Number of Teeth | 21 |
| Type | Conversion Set, clutch |
Important compatibility info
| Length | 622 mm |
| Wishbone Angle Measurement | 49 ° |
| Pipe Diameter | 46 mm |
| Steering arm type | Triangular Control Arm (CV) |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Connector / Clamp | B+, D+ |
| Type | Alternator |
| Function | Alternator |
| Belt Pulley Diameter | 61 mm |
| Alternator Charge Current | 120 A |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Number of mounting bores | 2 |
Important compatibility info
| Wishbone Angle Measurement | 58 ° |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Triangular Control Arm (CV) |
| Length | 649 mm |
| Pipe Diameter | 48 mm |
Important compatibility info
| Connector / Clamp | B+/L/DFM |
| Function | Alternator |
| Connector Shape | D Shape |
| Belt Pulley Diameter | 52 mm |
| Rotation Direction | Clockwise rotation |
| Alternator Charge Current | 120 A |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Type | Alternator |
| Number of mounting bores | 3 |
Important compatibility info
| Function | Starter |
| Number of mounting bores | 3 |
| Rated Power | 2 kW |
| Rotation Direction | Clockwise rotation |
| Number of Teeth | 22 |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Number of Parts | 2 -part |
| Hub Profile | 28.7 x 26.5 |
| Outer diameter | 240 mm |
| Function | Clutch Kit |
| Engine Version | for engines with dual-mass flywheel |
| Type | Clutch Kit |
| Number of Teeth | 26 |
Important compatibility info
| Wishbone Angle Measurement | 49 ° |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Triangular Control Arm (CV) |
| Length | 626 mm |
Important compatibility info
| Pipe Diameter | 62 mm |
| Type | Centre Rod Assembly |
| Length | 2179 mm |
| Rod/Strut | Push Rod |
| Function | Centre Rod Assembly |
Important compatibility info
| Hub Profile | 24.6 x 21.2 |
| Number of Parts | 3 -part |
| Outer diameter | 212 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 21 |
Important compatibility info
| Function | Repair Kit, control arm |
| Type | Repair Kit, control arm |
Additional Information
- 2x Borg & Beck Tie Rod End (BTR4724)
- 1x Borg & Beck Link/Coupling Rod, stabiliser bar (BDL6449)
- 1x Borg & Beck Link/Coupling Rod, stabiliser bar (BDL6450)
- 1x Borg & Beck Control/Trailing Arm, wheel suspension (BCA6111)
- 1x Borg & Beck Control/Trailing Arm, wheel suspension (BCA6112)
- 1x Borg & Beck Control/Trailing Arm, wheel suspension (BCA6113)
- 1x Borg & Beck Control/Trailing Arm, wheel suspension (BCA6114)
- 2x Borg & Beck Control/Trailing Arm, wheel suspension (BCA5829)
- 1x Borg & Beck Control/Trailing Arm, wheel suspension (BCA5830)
- 1x Borg & Beck Control/Trailing Arm, wheel suspension (BCA5831)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Repair Kit, control arm |
| Type | Repair Kit, control arm |
| Replaced by | BCA7118K |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 29 x 23.4 |
| Outer diameter | 251 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 10 |
Important compatibility info
| Number of Parts | 3 -part |
| Number of Teeth | 17 |
| Hub Profile | 23.2 x 20.3 |
| Outer diameter | 229 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Triangular Control Arm (CV) |
| Length | 663 mm |
Important compatibility info
| Function | Conversion Set, clutch |
| Number of Teeth | 21 |
| Type | Conversion Set, clutch |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7570 |
| Placement on Vehicle | Front Axle Left, Lower |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 26.3 x 23 |
| Outer diameter | 241 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 23 |
| Replaces | HK9690 |
Important compatibility info
| Plug Type ID | B+,FR,L/RVC |
| Function | Alternator |
| Connector Shape | Oval |
| Belt Pulley Diameter | 54 mm |
| Alternator Charge Current | 100 A |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Number of mounting bores | 2 |
| Type | Alternator |
Important compatibility info
| Number of Parts | 3 -part |
| Function | Clutch Kit |
| Outer diameter | 251 mm |
| Hub Profile | 29 x 23.4 |
| Type | Clutch Kit |
Important compatibility info
| Function | Brake Disc |
| Centering Diameter | 65 mm |
| Minimum thickness | 30 mm |
| Brake Disc Thickness | 32 mm |
| Height | 35 mm |
| Inspection Tag | ECE R90 Homologated |
| Outer diameter | 334 mm |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Placement on Vehicle | Front Axle Right |
| Number of Holes | 5 |
| Surface | Coated |
| Rotor Style | Vented |
Important compatibility info
| Number of Teeth | 18 |
| Number of Parts | 3 -part |
| Hub Profile | 19.3 x 17 |
| Outer diameter | 190 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Function | Water Pump, engine cooling |
| Water Pump Pulley Diameter | 69 mm |
| Type | Water Pump, engine cooling |
| Impeller Diameter | 149.7 mm |
| Height | 75.1 mm |
| Number of Wings | 6 |
| Number of Seals | 3 |
Important compatibility info
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Pipe Diameter | 60 mm |
| Rod/Strut | Push Rod |
| Thread Measurement 1 | M24X1.5 |
| Length | 1924 mm |
Important compatibility info
| Hub Profile | 20 x 18.3 |
| Type | Conversion Set, clutch |
| Function | Conversion Set, clutch |
| Number of Teeth | 24 |
Important compatibility info
| Function | Alternator |
| Belt Pulley Diameter | 81 mm |
| Alternator Charge Current | 80 A |
| Number of Ribs | 1 |
| Voltage | 12 V |
| Type | Alternator |
Important compatibility info
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Number of Wings | 9 |
Important compatibility info
| Plug Type ID | COM,B+ |
| Function | Alternator |
| Connector Shape | D Shape |
| Belt Pulley Diameter | 50 mm |
| Rotation Direction | Clockwise rotation |
| Alternator Charge Current | 180 A |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Type | Alternator |
| Number of mounting bores | 4 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 48 mm |
| Steering arm type | Triangular Control Arm (CV) |
| Length | 713 mm |
| Wishbone Angle Measurement | 47 ° |
Important compatibility info
| Number of Teeth | 23 |
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































