Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Thread Size | M24x1,5 |
Internal Teeth, wheel side | 37 |
External Teeth, Wheel Side | 30 |
Function | Joint Kit, drive shaft |
Weight | 2.982 kg |
Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Additional Information | without electric motor |
Operating Mode | Electric |
Paired article numbers | 193249 |
Weight | 0.9 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.5 kg |
Outer diameter | 280 mm |
Operating Mode | Electric |
Number of Connectors / Ports | 3 |
Rated Power | 200 W, 120 W |
Number of Wings | 6 |
Function | Fan, engine cooling |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.944 kg |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint, with bearing |
Material | Sheet Steel |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper, Front |
Additional Information | with fastening/mounting material |
External Thread Size | M12 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (179415)
- 2x Febi Screw (21477)
- 2x Febi Washer (40408)
- 2x Febi Nut (34653)
Important compatibility info
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 2.252 kg |
Internal Teeth, wheel side | 24 |
External Teeth, Wheel Side | 29 |
Thread Size | M24x1,5 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.25 kg |
Function | Gas Spring, bonnet |
Housing length | 432 mm |
Placement on Vehicle | Right |
Length | 811 mm |
Housing Diameter | 26 mm |
Eject Force | 390 N |
Stroke | 176 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Diameter | 50 mm |
Internal Teeth, wheel side | 23 |
Weight | 2.170 kg |
Number of Teeth, ABS ring | 44 |
External Thread Size | M22 x 1,5 |
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 25 |
Outer diameter | 87 mm |
Length | 158 mm |
Placement on Vehicle | Wheel Side, Front Axle |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.38 kg |
Internal Thread Size | M14 x 1,5 |
Length | 90 mm |
Width | 67 mm |
Thickness | 81 mm |
Operating Mode | Mechanical |
Mounting points diameter | 7 mm |
Type | Fuel Pump |
Function | Fuel Pump |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 1300 mm |
Colour | Black |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information 2 | with screw |
Cable Length | 1185 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Dust Cover Kit, shock absorber |
Weight | 0.542 kg |
Type | Dust Cover Kit, shock absorber |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (179915)
- 2x Febi Protective Cap/Bellow, shock absorber (181758)
Important compatibility info
Weight | 0.790 kg |
Placement on Vehicle | Left |
Length | 874 mm |
Housing Diameter | 22 mm |
Eject Force | 260 N |
Stroke | 404 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, bonnet |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 100 mm |
Placement on Vehicle | Front |
Type | Bush, driver cab suspension |
Length | 121.5 mm |
Material | Rubber/Metal |
Weight | 1.664 kg |
Inner diameter | 25 mm |
Function | Bush, driver cab suspension |
Replaces | 21773 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 32 mm |
Function | Deflection/Guide Pulley, V-ribbed belt |
Type | Deflection/Guide Pulley, V-ribbed belt |
Mounting points diameter | 10 mm |
Number of grooves | 10 |
Weight | 1.047 kg |
Width | 40 mm |
Outer diameter | 95 mm |
Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Inner diameter | 138 mm |
Filter type | Filter Insert |
Height | 333 mm |
Weight | 1.895 kg |
Outer diameter | 245 mm |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.9 kg |
Number of Wings | 8 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Additional Information | with gasket/seal |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M22 x 1,5 |
Length | 162 mm |
Internal Teeth, wheel side | 25 |
Outer diameter | 90 mm |
Weight | 2.540 kg |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 30 |
Seal Diameter | 85.6 mm |
Placement on Vehicle | Front Axle, Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1263 mm |
Outer diameter | 3.24 mm |
Inner diameter | 2 mm |
Weight | 0.14 kg |
External Thread Size | M12 x 1,5, M12 x 1 |
Function | Hose Line, driver cab tilting device |
Type | Hose Line, driver cab tilting device |
Pressure | 362 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.69 kg |
Placement on Vehicle | Rear Axle |
Length | 347 mm |
Outer diameter | 118 mm |
Number of Coils | 7.8 |
Function | Suspension Spring |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.770 kg |
Material | Cast Aluminium |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Metal |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.99 kg |
Placement on Vehicle | Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.768 kg |
Placement on Vehicle | Front |
Function | Repair Kit, driver cab suspension |
Type | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bush, driver cab suspension (09219)
- 2x Febi Joint Bearing, driver cab suspension (01820)
- 2x Febi Spacer, driver cab stabiliser (09460)
- 2x Febi Spacer, driver cab stabiliser (09461)
- 2x Febi Screw (16287)
- 4x Febi Seal Ring (16288)
- 2x Febi Washer (02350)
Important compatibility info
Inner diameter | 60 mm |
Function | Suspension, propshaft |
Weight | 1.72 kg |
Type | Suspension, propshaft |
Additional Information 2 | with rolling bearing |
Bearing Type | Rolling Bearing |
Replaces | 06212 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Gasket Set, cylinder head cover |
Function | Gasket Set, cylinder head cover |
Material | ACM (Polyacrylate) |
Weight | 0.11 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 155 mm |
Length | 393 mm |
Weight | 2.37 kg |
Number of Coils | 5.3 |
Type | Suspension Spring |
Function | Suspension Spring |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Bush, driver cab suspension |
Material | Rubber/Metal |
Function | Bush, driver cab suspension |
Weight | 0.900 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.242 kg |
Housing length | 281 mm |
Placement on Vehicle | both sides |
Length | 514 mm |
Eject Force | 490 N |
Stroke | 204 mm |
Housing Diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Mounting points diameter | 16.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with nuts |
Weight | 1.498 kg |
Placement on Vehicle | Front Axle Left |
Length | 396 mm |
Spanner Size | 30, 24 |
Paired article numbers | 44340 |
Function | Tie Rod |
External Thread Size | M16 x 1,5, M12 x 1,75 |
Extra Description | ProKit |
Additional Information 2 | with clamps, with steering bellow |
Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (43577)
- 1x Febi Tie Rod End (44245)
- 1x Febi Bellow, steering (39602)
Important compatibility info
Weight | 1.30 kg |
Placement on Vehicle | Rear |
Length | 1790 mm |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.031 kg |
Spanner Size | 10 |
Voltage | 12 V |
Glow Plug Type | after-glow capable |
Length | 126.5 mm |
External Thread Size | M10 x 1 |
Function | Glow Plug |
Type | Glow Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 177844 |
Weight | 3.288 kg |
Cone Size | 17.2 mm |
Type | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,25 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.288 kg |
Cone Size | 17.2 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 177843 |
Additional Information 2 | with ball joint |
External Thread Size | M12 x 1,25 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Weight | 0.3 kg |
Type | Ignition Coil |
Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 331 mm |
Material | Metal |
Weight | 1.139 kg |
Type | Oil sump, automatic transmission |
Function | Oil sump, automatic transmission |
Extra Description | febi Plus |
External Thread Size | M10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Rim Hole Number | 5 -Hole |
Weight | 4.1 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 272 mm |
Thickness | 58.2 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 65 mm |
Surface | Coated |
Number of mounting bores | 1 |
Type | Brake Disc Rotor |
Function | Brake Disc |
for OE number | 5Q0 615 601 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 4 -Hole |
Rotor Style | Solid |
Weight | 3.990 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 276 mm |
Thickness | 35 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 55 mm |
Surface | Coated |
Number of mounting bores | 1 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 70 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Material | Metal |
Weight | 0.510 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 33 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 185026 |
Placement on Vehicle | Rear Axle Left |
Length | 338 mm |
Internal Thread Size | M10 x 1 |
Weight | 0.275 kg |
Function | Brake Hose |
Type | Brake Hose |
External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.38 kg |
Function | Radiator Hose |
Cooling Hose | from engine to water pump |
Additional Information 2 | with clamps |
Type | Radiator Hose |
Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.11 kg |
Function | Control Valve, camshaft adjustment |
Extra Description | febi Plus |
Type | Control Valve, camshaft adjustment |
Placement on Vehicle | Intake Side, Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.58 kg |
Placement on Vehicle | Right Rear |
Material | Rubber/Metal |
Inner diameter | 12 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, engine |
Function | Mounting, engine |
Weight | 0.590 kg |
Placement on Vehicle | Front Axle, Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.427 kg |
Cooling Hose | from engine to engine cooler |
Type | Radiator Hose |
Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 6 |
Function | Control Unit, air conditioning |
Extra Description | febi Plus |
Type | Control Unit, air conditioning |
Weight | 0.200 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Weight | 0.818 kg |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Front Axle |
Function | Bush, spring eye |
Type | Bush, spring eye |
Shape/Form | slotted |
Weight | 1.12 kg |
Inner diameter | 25 mm |
Outer diameter | 59 mm |
Length | 96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Colour | Black |
Function | Thermostat, coolant |
Weight | 0.160 kg |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 143 mm |
Spanner Size | 12 |
Function | Glow Plug |
Voltage | 11 V |
External Thread Size | M10 x 1,25 |
Type | Glow Plug |
Glow Plug Type | after-glow capable |
Weight | 0.040 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Front |
Weight | 1.220 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Parts Set, maintenance service |
Weight | 0.61 kg |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (36562)
- 1x Febi Oil Filter (37257)
- 1x Febi Air Filter (30368)
- 4x Febi Spark Plug (13536)
- 1x Febi Screw Plug, oil sump (04572)
- 1x Febi Filter, cabin air (11233)
Important compatibility info
Width | 26 mm |
Outer diameter | 140 mm |
Inner diameter | 80 mm |
Bearing Type | Ball Bearing |
Function | Bearing, manual transmission |
Weight | 1.34 kg |
Type | Bearing, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023