Important compatibility info
| Material | Rubber/Metal |
| Paired article numbers | 12072 |
| Function | Suspension Strut Support Mount |
| Replaces | 12073 |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (12068)
- 1x Febi Rolling Bearing, suspension strut support mount (12070)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Inner diameter | 14 mm |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | without ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (34951)
- 1x Febi Nut (38105)
- 1x Febi Washer (08375)
Important compatibility info
| Length | 141 mm |
| Thickness | 38 mm |
| Function | Cylinder Head, air compressor |
| Width | 130 mm |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 331 mm |
| Min. Length | 238 mm |
| Pipe Diameter | 44 mm. 54 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 13 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wire Diameter | 14.8 mm |
| Placement on Vehicle | Front Axle |
| Length | 350 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Outer diameter | 110 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 373 mm |
| Inner diameter | 62 mm. 16 mm |
| Spanner Size | 41 |
| Paired article numbers | 40092 |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information 2 | with nut, with clamps, with steering bellow |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (39673)
- 1x Febi Nut (38356)
- 1x Febi Bellow, steering (40058)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 373 mm |
| Inner diameter | 16 mm. 62 mm |
| Spanner Size | 41 |
| Paired article numbers | 40091 |
| Function | Tie Rod |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Additional Information 2 | with nut, with clamps, with steering bellow |
| Type | Tie Rod |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (39674)
- 1x Febi Nut (38356)
- 1x Febi Bellow, steering (40058)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
| Function | Ball Joint |
| External Thread Size | M14 x 1,5, M12 x 1,25 |
| Paired article numbers | 43025 |
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
| Cone Size | 14 mm |
| Mounting points diameter | 14.5 mm |
| Type | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 2 |
| Placement on Vehicle | outer, Front Axle Left |
| Length | 188 mm |
| Thickness | 79 mm |
| Paired article numbers | 48112 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 96 mm |
| Outer diameter | 61 mm |
| Inner diameter | 25 mm |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023









