Important compatibility info
Weight | 0.020 kg |
Length | 50 mm |
Width | 27 mm |
Outer diameter | 21 mm |
Thickness | 52 mm |
Inner diameter | 6.7 mm |
Number of Connectors / Ports | 3 |
Function | Sensor, camshaft position |
Additional Information | with gasket/seal |
Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.05 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (22532)
- 1x Febi Air Filter (30361)
- 1x Febi Filter, cabin air (11566)
- 1x Febi Fuel filter (26201)
- 4x Febi Spark Plug (13530)
- 1x Febi Screw Plug, oil sump (15374)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Weight | 0.045 kg |
Cable Length | 860 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.63 kg |
Function | Engine Compartment Noise Insulation |
Type | Engine Compartment Noise Insulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.659 kg |
Material | Aluminium |
Number of Ribs | 18 |
Type | Oil Cooler, engine oil |
Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.642 kg |
Placement on Vehicle | Left |
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 6Q0 199 555 AT |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.0 kg |
Placement on Vehicle | Front Axle Right, Lower |
Steering arm type | Control Arm |
Paired article numbers | 12559 |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holders |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.0 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 12558 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holders |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Upper, Rear |
Material | Aluminium |
Steering arm type | Control Arm |
Rod/Strut | Guide Rod |
Function | Control/Trailing Arm, wheel suspension |
Weight | 0.425 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 10.0 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 280 mm |
Thickness | 65 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Number of mounting bores | 1 |
Mounting points diameter | 15 mm |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Rotor Style | Solid |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.106 kg |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Type | Washer Fluid Pump, window cleaning |
Function | Washer Fluid Pump, window cleaning |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, automatic transmission |
Weight | 0.463 kg |
Placement on Vehicle | Rear |
Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 1,5 |
Placement on Vehicle | Rear Axle |
Length | 240 mm |
Weight | 3.200 kg |
Rod/Strut | Coupling Rod |
Cone Size | 28.6 mm |
Pipe Diameter | 36 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Diameter | 36 mm |
Material | Steel |
Thickness | 179 mm |
Additional Information 2 | with crown nut |
Spanner Size | 30 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.820 kg |
Placement on Vehicle | Front Axle Right, Upper |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 24417 |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,25 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Shaft, drum brake |
Paired article numbers | 17497 |
Placement on Vehicle | Front Axle Right |
Weight | 2.85 kg |
Type | Brake Shaft, drum brake |
Length | 223 mm |
Outer diameter | 98 mm |
Number of Teeth | 26 |
Screw length below head | 175 mm |
Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wheel Bearing Kit |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Inner diameter | 47 mm |
Bearing Type | Tapered Roller Bearing |
Type | Wheel Bearing Kit |
Width | 55 mm |
Outer diameter | 88 mm |
Weight | 1.750 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 29633 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.66 kg |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Material | Aluminium |
Paired article numbers | 174666 |
Placement on Vehicle | Lower, Front Axle Left |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Steering arm type | Control Arm |
Weight | 2.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Parts Set, maintenance service |
Weight | 1.095 kg |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (22532)
- 1x Febi Air Filter (21110)
- 1x Febi Filter, cabin air (09446)
- 4x Febi Spark Plug (13533)
- 1x Febi Screw Plug, oil sump (15374)
- 1x Febi Fuel filter (21626)
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Weight | 0.08 kg |
Cable Length | 1865 mm |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 179123 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with heat shield |
Weight | 0.360 kg |
Width | 240 mm |
Material | Sheet Steel |
Inner diameter | 25 mm |
Function | Gasket, exhaust manifold |
Hole Spacing | 73 mm |
Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.145 kg |
Length | 235 mm |
Width | 433 mm |
Thickness | 127.5 mm |
Function | Expansion Tank, coolant |
Additional Information | with coolant level sensor |
Type | Expansion Tank, coolant |
Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 2N0 412 303 H S1 |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Placement on Vehicle | Front Axle |
Weight | 0.680 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (187821)
- 2x Febi Protective Cap/Bellow, shock absorber (109548)
Important compatibility info
Weight | 0.6 kg |
Material | Aluminium |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 13 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.955 kg |
Type | Repair Kit, kingpin |
Additional Information | with Thrust Bearing |
Additional Information 2 | with bearing |
Inner diameter | 50 mm |
Function | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bush, steering knuckle (34565)
- 4x Febi Bush, steering knuckle (08524)
- 1x Febi Seal Ring, steering knuckle (05868)
- 1x Febi Seal Ring, steering knuckle (03727)
- 2x Febi Seal Ring, steering knuckle (15795)
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 452 mm |
Weight | 2.6 kg |
Outer diameter | 168 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Number of Coils | 5.8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.331 kg |
Placement on Vehicle | both sides |
Length | 553 mm |
Housing Diameter | 18 mm |
Eject Force | 760 N |
Stroke | 176 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 348 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.883 kg |
Width of castor bearing surface | 26 mm |
Outer diameter | 76 mm |
Operating Mode | Automatic |
Type | Belt Tensioner, v-ribbed belt |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.204 kg |
Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
Thread Size | M24x1,5 |
External Teeth, Wheel Side | 25 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Upper, Front |
Additional Information | with rubber-metal mounts |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 185552 |
Weight | 0.625 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Function | Tie Rod |
Pipe Diameter | 18 mm |
Paired article numbers | 25188 |
Length | 400 mm |
Weight | 1.188 kg |
Extra Description | ProKit |
External Thread Size | M12 x 1,5 |
Type | Tie Rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 11 61 7 516 007 |
Weight | 0.348 kg |
Material | Plastic |
Function | Oil Separator, crankcase ventilation |
Extra Description | febi Plus |
Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.195 kg |
Width | 19.4 mm |
Outer diameter | 64 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 24 |
Internal Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Function | Tie Rod End |
Length | 221 mm |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Left |
Weight | 0.649 kg |
Paired article numbers | 183614 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Weight | 2.9 kg |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32582)
- 1x Febi Camber Correction Screw (37216)
Important compatibility info
Weight | 0.092 kg |
Width | 60.5 mm |
Outer diameter | 20 mm |
Function | Tensioner, timing chain |
for OE number | 1 662 847 |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 334 mm |
Placement on Vehicle | both sides |
Stroke | 127 mm |
Housing Diameter | 15 mm |
Eject Force | 270 N |
Housing length | 183.5 mm |
Function | Gas Spring, rear window |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 6 mm |
Weight | 0.133 kg |
Type | Gas Spring, rear window |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Cooling Hose | from thermostat to radiator |
Function | Radiator Hose |
Weight | 0.343 kg |
Additional Information 2 | with quick couplers |
Type | Radiator Hose |
Hose Length | 263 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belts | with trapezoidal tooth profile |
Width | 15 mm |
Number of Teeth | 104 |
Surface | Coated |
Water pump impeller material | Plastic |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Weight | 1.054 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11071)
- 1x Febi Water Pump, engine cooling (10600)
Important compatibility info
Placement on Vehicle | Right Front |
Additional Information | with electric motor |
Operating Mode | Electric |
Paired article numbers | 193269 |
Weight | 1.1 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.26 kg |
Turbocharger line | Piping to charge air cooler |
Material | ACM (Polyacrylate) |
Function | Charge Air Hose |
Placement on Vehicle | Charge Air Cooler, Left |
Additional Information 2 | with quick couplers |
Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cooling Hose | from heat exchanger to engine |
Function | Radiator Hose |
Weight | 0.434 kg |
Type | Radiator Hose |
Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Width of castor bearing surface | 24 mm |
Type | Belt Tensioner, v-ribbed belt |
Weight | 0.787 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.482 kg |
Material | Plastic |
Colour | Black |
Function | Holder, coolant compensation tank |
Extra Description | febi Plus |
Type | Holder, coolant compensation tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.120 kg |
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Bore Diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.460 kg |
Material | PE (Polyethylene) |
Colour | White |
Function | Washer Fluid Reservoir, window cleaning |
Extra Description | febi Plus |
Type | Washer Fluid Reservoir, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Deflection/Guide Pulley, v-ribbed belt |
Outer diameter | 60 mm |
Material | Plastic |
Width of castor bearing surface | 26 mm |
Weight | 0.115 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 1.650 kg |
Internal Teeth, wheel side | 20 |
Seal Diameter | 55.6 mm |
External Teeth, Wheel Side | 26 |
Outer diameter | 73 mm |
Placement on Vehicle | Wheel Side |
Length | 141 mm |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.5 kg |
External Thread Size | M18 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 340 mm |
Rod/Strut | Coupling Rod |
Cone Size | 22 mm |
Pipe Diameter | 30 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.82 kg |
Function | Seal, windscreen |
Type | Seal, windscreen |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023