Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.094 kg |
| Placement on Vehicle | Rear Axle Right, Rear, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 46421 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Weight | 1.820 kg |
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 24417 |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,25 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Weight | 0.600 kg |
| for OE number | 25100-2B000 |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| for OE number | 1 381 495 |
| Number of mounting bores | 6 |
| Mounting points diameter | 9 mm |
| Function | Thermostat Housing |
| Weight | 0.400 kg |
| Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Material | AEM (Ethylene Acrylate Rubber) |
| Additional Information 2 | with quick couplers |
| Weight | 0.338 kg |
| Placement on Vehicle | Charge Air Cooler, Right |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Turbocharger line | Turbocharger to piping |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 22 |
| Weight | 1.972 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
| Weight | 0.318 kg |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Height | 79 mm |
| Outer diameter | 89.5 mm |
| Additional Information 2 | with seal ring |
| Spanner Size | 64 |
| Weight | 0.165 kg |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Outer diameter | 215 mm |
| Inner diameter | 177 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Number of Teeth, ABS ring | 100 |
| Function | Sensor Ring, ABS |
| Weight | 1.17 kg |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Type | Hose Line, driver cab tilting device |
| Internal Thread Size | M12 x 1,5, M12 x 1 |
| External Thread Size | M14 x 1,5 |
| Function | Hose Line, driver cab tilting device |
| Outer diameter | 6.06 mm. 3.22 mm |
| Length | 2122 mm |
| Inner diameter | 2.11 mm. 1.95 mm |
| Pressure | 362 bar |
| Weight | 0.21 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Paired article numbers | 172528 |
| Placement on Vehicle | Front Axle Right |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 1040 mm |
| Weight | 0.104 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Weight | 1.094 kg |
| Placement on Vehicle | Rear Axle Left, Rear, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 46422 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Weight | 1.5 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 337 mm |
| Min. Length | 237 mm |
| Pipe Diameter | 43 mm. 56 mm |
| Piston conrod diameter | 13 mm |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Additional Information 2 | with ball joint |
| Cone Size | 14 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| External Thread Size | M10 x 1,25 |
| Paired article numbers | 177967 |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Sheet Steel |
| Weight | 1.52 kg |
| Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Weight | 1.442 kg |
| Additional Information | with lock nut, with rubber mounts |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size 2 | 21 mm |
| Cone Size 1 | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 180941 |
| Weight | 0.8 kg |
| Type | Tie Rod |
| Function | Tie Rod |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (175083)
- 1x Febi Inner Tie Rod (178477)
£39.44
Important compatibility info
| Weight | 0.883 kg |
| Width of castor bearing surface | 26 mm |
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Weight | 0.08 kg |
| Cable Length | 1865 mm |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 179123 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Number of mounting bores | 3 |
| Function | Central Slave Cylinder, clutch |
| Type | Central Slave Cylinder, clutch |
| for OE number | 56 79 355 |
| Weight | 0.370 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Additional Information | with lock nut |
| Type | Tie Rod End |
| Spanner Size | 24 |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Paired article numbers | 183508 |
| Weight | 0.649 kg |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 221 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| External Teeth, Wheel Side | 28 |
| Placement on Vehicle | Wheel Side, Front Axle |
| Seal Diameter | 50 mm |
| Type | Joint Kit, drive shaft |
| Weight | 3.440 kg |
| Outer diameter | 99 mm |
| Length | 221 mm |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Outer diameter | 60 mm |
| Function | Tensioner Pulley, timing belt |
| Weight | 0.296 kg |
| Width of castor bearing surface | 26 mm |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Wire Diameter | 12.8 mm |
| Placement on Vehicle | Front Axle |
| Length | 362 mm |
| Function | Suspension Spring |
| Number of Coils | 4.8 |
| Weight | 2.02 kg |
| Type | Suspension Spring |
| Outer diameter | 156 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 24 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 0.787 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Weight | 0.438 kg |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Width | 59 mm |
| Length | 87 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (176337)
- 2x Febi Protective Cap/Bellow, shock absorber (175559)
£39.44
Important compatibility info
| Weight | 0.056 kg |
| Type | Oil Jet, piston underside cooling |
| Function | Oil Jet, piston underside cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Weight | 1.578 kg |
| Placement on Vehicle | Rear Axle |
| Width | 42 mm |
| Outer diameter | 72 mm |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with grease cap |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (170375)
- 1x Febi Cap, wheel bearing (24232)
- 1x Febi Nut (24230)
- 1x Febi Bolt, brake disc (04511)
£39.44
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 696 mm |
| Weight | 0.2 kg |
| Housing Diameter | 19 mm |
| Eject Force | 630 N |
| Stroke | 163 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 488 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Weight | 0.955 kg |
| Type | Repair Kit, kingpin |
| Additional Information | with Thrust Bearing |
| Additional Information 2 | with bearing |
| Inner diameter | 50 mm |
| Function | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bush, steering knuckle (34565)
- 4x Febi Bush, steering knuckle (08524)
- 1x Febi Seal Ring, steering knuckle (05868)
- 1x Febi Seal Ring, steering knuckle (03727)
- 2x Febi Seal Ring, steering knuckle (15795)
£39.44
Important compatibility info
| Weight | 0.26 kg |
| Turbocharger line | Piping to charge air cooler |
| Material | ACM (Polyacrylate) |
| Function | Charge Air Hose |
| Placement on Vehicle | Charge Air Cooler, Left |
| Additional Information 2 | with quick couplers |
| Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Weight | 0.33 kg |
| Width of castor bearing surface | 18 mm |
| Material | Plastic |
| Outer diameter | 74 mm |
| Type | Tensioner Pulley, v-ribbed belt |
| Function | Tensioner Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Weight | 3.3 kg |
| Placement on Vehicle | Front Axle |
| Length | 434 mm |
| Outer diameter | 171 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Wire Diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Additional Information | with adjuster |
| Weight | 0.472 kg |
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
| for OE number | 8R0 827 505 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Function | Parts Set, maintenance service |
| Weight | 1.095 kg |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (22532)
- 1x Febi Air Filter (21110)
- 1x Febi Filter, cabin air (09446)
- 4x Febi Spark Plug (13533)
- 1x Febi Screw Plug, oil sump (15374)
- 1x Febi Fuel filter (21626)
£39.44
Important compatibility info
| Weight | 0.6 kg |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 13 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 749 mm |
| Weight | 0.045 kg |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Weight | 2.608 kg |
| Outer diameter | 280 mm |
| Operating Mode | Electric |
| Number of Connectors / Ports | 3 |
| Rated Power | 100 W |
| Number of Wings | 6 |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Paired article numbers | 46260 |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Material | Cast Steel |
| Placement on Vehicle | Rear Axle Left |
| Steering arm type | Control Arm |
| Thread Length | 22 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 1.786 kg |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Weight | 0.265 kg |
| Length | 3730 mm |
| Outer diameter | 8.5 mm |
| Inner diameter | 4.2 mm |
| Pressure | 400 bar |
| Function | Hose Line, driver cab tilting device |
| External Thread Size | M14 x 1,5 |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| for OE number | 11 61 7 516 007 |
| Weight | 0.348 kg |
| Material | Plastic |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Weight | 2.750 kg |
| Function | Repait Kit, spring bearing frame |
| Type | Repait Kit, spring bearing frame |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bush, spring eye (29569)
- 1x Febi Rubber Buffer, suspension (47033)
- 1x Febi Rubber Buffer, suspension (47127)
£39.45
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 2 |
| Weight | 0.20 kg |
| Type | Pressure converter, turbocharger |
| Function | Pressure converter, turbocharger |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.45
Important compatibility info
| Function | Brake Caliper |
| Type | Brake Caliper |
| Weight | 3.289 kg |
| Paired article numbers | 179091 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Left |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.46
Important compatibility info
| Paired article numbers | 175590 |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Placement on Vehicle | Front Axle Right |
| Weight | 0.515 kg |
| Type | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.46
Important compatibility info
| Type | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179090 |
| Weight | 3.289 kg |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.46
Important compatibility info
| Weight | 1.317 kg |
| Length | 133 mm |
| Width | 127 mm |
| Thickness | 26 mm |
| Function | Seal Kit, multi-valve |
| Additional Information 2 | with spacer plate |
| Type | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.46
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 280 mm |
| Thickness | 34.1 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Weight | 4.92 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.46
Important compatibility info
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
| Number of hoses | 2 |
| Weight | 0.368 kg |
| Placement on Vehicle | Rear Axle Left |
| Length | 346 mm |
| Paired article numbers | 172683 |
| Thread Length | 7 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.46
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Weight | 0.66 kg |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Material | Cast Aluminium |
| Additional Information 2 | with studs |
| Additional Information | with gasket/seal |
| Number of Wings | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.47
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 235 mm |
| Width | 105 mm |
| Material | PU (Polyurethane) |
| Weight | 0.588 kg |
| for OE number | 2N0 412 303 K S1 |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (109548)
- 2x Febi Rubber Buffer, suspension (170027)
£39.48
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023