Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Gasket, exhaust manifold |
| Type | Gasket, exhaust manifold |
| Additional Information 2 | with heat shield |
| Weight | 0.370 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.115 kg |
| Additional Information 2 | with cap |
| Width of castor bearing surface | 30 mm |
| Material | Plastic |
| Outer diameter | 70 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 2.2 kg |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Material | Steel |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts, with lock nut |
| External Thread Size | M14 x 1,5 |
| Cone Size | 18.5 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178745 |
| Weight | 1.395 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 4.500 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 53 mm |
| Max. Length | 518 mm |
| Min. Length | 317 mm |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.540 kg |
| Type | Repair Kit, adjuster |
| Function | Repair Kit, adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.5 kg |
| Housing length | 340 mm |
| Mounting points diameter | 18 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 10 mm |
| Stroke | 176 mm |
| Eject Force | 680 N |
| Housing Diameter | 18 mm |
| Length | 582 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 1.2 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 224 mm |
| Min. Length | 194 mm |
| Pipe Diameter | 42 mm. 48 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 1.90 kg |
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | Rear Axle Left |
| Length | 160 mm |
| Paired article numbers | 46145 |
| Rod/Strut | Coupling Rod |
| Cone Size | 26 mm |
| Pipe Diameter | 26 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Length | 560 mm |
| Steering arm type | Control Arm |
| Weight | 1.240 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Sheet Steel |
| Inner diameter | 12 mm. 10 mm |
| Rod/Strut | Push Rod |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Rod/Strut, wheel suspension |
| Type | Rod/Strut, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Opening Temperature | 87 °C |
| Outer Length | 95 mm. 90 mm. 130 mm |
| Function | Thermostat Housing |
| Type | Thermostat Housing |
| Weight | 0.367 kg |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178187 |
| Weight | 4.6 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 1.395 kg |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Paired article numbers | 178744 |
| Function | Brake Caliper |
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Right |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 1.131 kg |
| Height | 195 mm |
| Width | 180 mm |
| Inner diameter | 64 mm |
| Function | Charge Air Hose |
| Turbocharger line | Turbocharger to Inlet Manifold |
| Type | Charge Air Hose |
| Hose Length | 570 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 1.820 kg |
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 24418 |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,25 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 1.98 kg |
| Placement on Vehicle | Front Axle |
| Length | 120 mm |
| Cone Size | 30 mm |
| Function | Tie Rod End |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Internal Thread Size | M24 x 1,5 RHT |
| Type | Tie Rod End |
| Thread Type | with right-hand thread |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178186 |
| Weight | 4.6 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 1.610 kg |
| Outer diameter | 132 mm |
| Thickness | 28 mm |
| Inner diameter | 13 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Steering arm type | Trailing Arm, Control Arm |
| Weight | 1.170 kg |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Function | Hose Line, driver cab tilting device |
| Type | Hose Line, driver cab tilting device |
| Pressure | 400 bar |
| Weight | 2.24 kg |
| Inner diameter | 4.2 mm |
| Outer diameter | 8.6 mm |
| Length | 2775 mm |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Exhaust Side |
| Weight | 0.104 kg |
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 3.870 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 58 mm |
| Max. Length | 534 mm |
| Min. Length | 355 mm |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.63 kg |
| Material | Cast Aluminium |
| Number of Wings | 16 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Type | Pressure Limiting Valve |
| Weight | 0.38 kg |
| Internal Thread Size | M22 x 1,5 |
| Function | Pressure Limiting Valve |
| Outlet pressure from | 7 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 193269 |
| Weight | 1.1 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Length | 2710 mm |
| Material | ACM (Polyacrylate) |
| Function | Gasket, oil sump |
| Weight | 0.309 kg |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Material | Plastic |
| Weight | 0.32 kg |
| Number of Connectors / Ports | 2 |
| Voltage | 12 V |
| for OE number | 078 121 601 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Cooling Hose | from engine cooler to water pump |
| Function | Radiator Hose |
| for OE number | 74 21 390 629 |
| Type | Radiator Hose |
| Weight | 0.6 kg |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Type | V-Belt |
| Weight | 0.61 kg |
| Length | 1950 mm |
| Function | V-Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 3.24 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 43045 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
| Replaces | 43068 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.164 kg |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 4.920 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 254 mm |
| Thickness | 40.5 mm |
| Brake Disc Thickness | 24.6 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 87 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.43
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 155.4 mm. 156.4 mm |
| Width | 74.2 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm. 19.5 mm |
| Function | Brake Pad Set, disc brake |
| Weight | 2.160 kg |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.43
Important compatibility info
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Function | Ball Joint |
| Weight | 0.47 kg |
| External Thread Size | M14 x 1,5 |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.44
Important compatibility info
| Material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Weight | 0.870 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.44
Important compatibility info
| Material | Plastic |
| Weight | 0.33 kg |
| Function | Valve, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Valve, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.44
Important compatibility info
| Weight | 0.1 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Type | Washer Fluid Pump, window cleaning |
| Function | Washer Fluid Pump, window cleaning |
| for OE number | MB848901 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.45
Important compatibility info
| Weight | 0.090 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Type | Washer Fluid Pump, window cleaning |
| Function | Washer Fluid Pump, window cleaning |
| for OE number | MR502984 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.45
Important compatibility info
| Outer diameter | 50 mm |
| Weight | 3.614 kg |
| Length | 153 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.46
Important compatibility info
| Rotor Style | Solid |
| Weight | 4.515 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 276 mm |
| Thickness | 44.6 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.46
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Cable Length | 170 mm |
| Type | Sensor, crankshaft pulse |
| Weight | 0.038 kg |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.48
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Weight | 4.362 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 257 mm |
| Thickness | 50.1 mm |
| Brake Disc Thickness | 17 mm |
| Minimum thickness | 15 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.49
Important compatibility info
| Additional Information 2 | with screw |
| Weight | 0.086 kg |
| Number of Connectors / Ports | 9 |
| Cable Length | 320 mm |
| Type | Resistor, interior blower |
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.49
Important compatibility info
| Weight | 0.07 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Type | Washer Fluid Pump, window cleaning |
| for OE number | 85330-60160 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.49
Important compatibility info
| Weight | 0.015 kg |
| Length | 35 mm |
| Width | 48.5 mm |
| Thickness | 43 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, intake manifold pressure |
| for OE number | 005 153 50 28 |
| Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.50
Important compatibility info
| Outer diameter | 65 mm |
| Operating Mode | Mechanical |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Weight | 0.656 kg |
| Width of castor bearing surface | 25 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.50
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 22862 |
| Placement on Vehicle | Front Axle Left, Lower |
| Weight | 6.200 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Inner diameter | 14 mm |
| Cone Size | 17 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.51
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 22861 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 6.2001 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Inner diameter | 14 mm |
| Cone Size | 17 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.51
Important compatibility info
| Weight | 1.95 kg |
| Placement on Vehicle | inner |
| Outer diameter | 90 mm |
| Thickness | 59 mm |
| Inner diameter | 11 mm. 44 mm |
| Function | Repair Kit, guide strut |
| Type | Repair Kit, guide strut |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.52
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 4.454 kg |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Brake Disc Thickness | 11 mm |
| Outer diameter | 280 mm |
| Thickness | 40.8 mm |
| Placement on Vehicle | Rear Axle |
| Rotor Style | Solid |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 108 mm |
| Minimum thickness | 9 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.52
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023