Proud to be a UK-based company
Contact us
Important compatibility info
| for OE number | 06K 103 495 BL |
| Extra Description | febi Plus |
| Function | Oil Separator, crankcase ventilation |
| Weight | 0.431 kg |
| Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Placement on Vehicle | Front Axle Left, transmission sided, Front Axle Right |
| Internal Teeth, wheel side | 28 |
| Weight | 2.198 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Length | 560 mm |
| Steering arm type | Control Arm |
| Weight | 1.240 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Sheet Steel |
| Inner diameter | 12 mm. 10 mm |
| Rod/Strut | Push Rod |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Rod/Strut, wheel suspension |
| Type | Rod/Strut, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.164 kg |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.89 kg |
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (32122)
- 1x Febi Air Filter (30355)
- 1x Febi Fuel filter (17635)
- 4x Febi Spark Plug (13524)
- 1x Febi Screw Plug, oil sump (03160)
- 1x Febi Seal Ring, oil drain plug (07215)
- 1x Febi Filter, cabin air (09429)
- 1x Febi Filter, cabin air (09430)
£41.42
Important compatibility info
| Weight | 3.24 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 43044 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 1.820 kg |
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 24418 |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,25 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Material | Metal |
| Bore Diameter | 78 mm |
| Thickness | 1.2 mm |
| Weight | 0.27 kg |
| Type | Gasket, cylinder head |
| Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Material | Plastic |
| Operating Mode | Electric |
| Weight | 0.07 kg |
| Length | 125 mm. 320 mm. 600 mm |
| Number of Connectors / Ports | 3 |
| Function | Control, seat height adjustment |
| Colour | Red, Black, Green |
| Type | Control, seat height adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Length | 800 mm |
| Additional Information 2 | with tensioner element |
| Number of Ribs | 6 |
| Operating Mode | Automatic |
| Weight | 0.676 kg |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38250)
- 1x Febi Belt Tensioner, v-ribbed belt (181682)
£41.42
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 4.500 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 53 mm |
| Max. Length | 518 mm |
| Min. Length | 317 mm |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Weight | 0.613 kg |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Extra Description | febi Plus |
| Voltage | 12 V |
| Operating Mode | Electric-pneumatic |
| Function | Pressure converter, turbocharger |
| Type | Pressure converter, turbocharger |
| Weight | 0.221 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178153 |
| Weight | 2.55 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Outer diameter | 64 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Weight | 0.61 kg |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Exhaust Side |
| Weight | 0.104 kg |
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Opening Temperature | 87 °C |
| Outer Length | 95 mm. 90 mm. 130 mm |
| Function | Thermostat Housing |
| Type | Thermostat Housing |
| Weight | 0.367 kg |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Type | V-Belt |
| Weight | 0.61 kg |
| Length | 1950 mm |
| Function | V-Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 180651 |
| Weight | 0.675 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Right, Upper, Rear |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 3.870 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 58 mm |
| Max. Length | 534 mm |
| Min. Length | 355 mm |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 1.98 kg |
| Placement on Vehicle | Front Axle |
| Length | 120 mm |
| Cone Size | 30 mm |
| Function | Tie Rod End |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Internal Thread Size | M24 x 1,5 RHT |
| Type | Tie Rod End |
| Thread Type | with right-hand thread |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Width | 25 mm |
| Inspection Tag | ECE R90 Approved |
| Weight | 1.31 kg |
| Function | Brake Shoe Set, parking brake |
| Outer diameter | 180 mm |
| Placement on Vehicle | Rear Axle |
| Type | Brake Shoe Set, parking brake |
| Additional Information | with fastening/mounting material |
| for OE number | 221 420 05 20 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 2.563 kg |
| Placement on Vehicle | Front Axle |
| Length | 193.2 mm. 193 mm |
| Width | 79.3 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.4 mm. 19.4 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.43
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 296 mm |
| Thickness | 44 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.5 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Weight | 4.6 kg |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.43
Important compatibility info
| Function | Sensor, boost pressure / Sensor, intake air temperature |
| Number of Connectors / Ports | 4 |
| Type | Sensor, boost pressure / Sensor, intake air temperature |
| for OE number | 1398 468 |
| Weight | 0.03 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.43
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 155.4 mm. 156.4 mm |
| Width | 74.2 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm. 19.5 mm |
| Function | Brake Pad Set, disc brake |
| Weight | 2.160 kg |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.43
Important compatibility info
| Material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Weight | 0.870 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.44
Important compatibility info
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Function | Ball Joint |
| Weight | 0.47 kg |
| External Thread Size | M14 x 1,5 |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.44
Important compatibility info
| Material | Plastic |
| Weight | 0.33 kg |
| Function | Valve, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Valve, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.44
Important compatibility info
| Weight | 0.090 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Type | Washer Fluid Pump, window cleaning |
| Function | Washer Fluid Pump, window cleaning |
| for OE number | MR502984 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.45
Important compatibility info
| Weight | 0.1 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Type | Washer Fluid Pump, window cleaning |
| Function | Washer Fluid Pump, window cleaning |
| for OE number | MB848901 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.45
Important compatibility info
| Outer diameter | 50 mm |
| Weight | 3.614 kg |
| Length | 153 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.46
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Cable Length | 170 mm |
| Type | Sensor, crankshaft pulse |
| Weight | 0.038 kg |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.48
Important compatibility info
| Additional Information 2 | with screw |
| Weight | 0.086 kg |
| Number of Connectors / Ports | 9 |
| Cable Length | 320 mm |
| Type | Resistor, interior blower |
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.49
Important compatibility info
| Weight | 0.015 kg |
| Length | 35 mm |
| Width | 48.5 mm |
| Thickness | 43 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, intake manifold pressure |
| for OE number | 005 153 50 28 |
| Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.50
Important compatibility info
| Outer diameter | 65 mm |
| Operating Mode | Mechanical |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Weight | 0.656 kg |
| Width of castor bearing surface | 25 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.50
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 22862 |
| Placement on Vehicle | Front Axle Left, Lower |
| Weight | 6.200 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Inner diameter | 14 mm |
| Cone Size | 17 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.51
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 22861 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 6.2001 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Inner diameter | 14 mm |
| Cone Size | 17 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.51
Important compatibility info
| Weight | 1.95 kg |
| Placement on Vehicle | inner |
| Outer diameter | 90 mm |
| Thickness | 59 mm |
| Inner diameter | 11 mm. 44 mm |
| Function | Repair Kit, guide strut |
| Type | Repair Kit, guide strut |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.52
Important compatibility info
| Weight | 0.344 kg |
| Additional Information 2 | with lid |
| Width | 38.3 mm |
| Outer diameter | 49.1 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 7 |
| Tightening Torque | 85 Nm |
| Function | Alternator Freewheel Clutch |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.53
Important compatibility info
| Weight | 1.500 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.53
Important compatibility info
| Weight | 1.500 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.53
Important compatibility info
| Material | Aluminium |
| Colour | Green |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 0.911 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.54
Important compatibility info
| Weight | 0.223 kg |
| Additional Information 2 | Requires special tools for mounting |
| Function | Chain Kit, oil pump drive |
| Number of Chain Links | 60 |
| Chain Type | Silent Chain, Closed chain |
| Type | Chain Kit, oil pump drive |
| Extra Description | Basic Short Kit |
| for OE number | 06K 115 225 C S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (45954)
- 1x Febi Chain Tensioner, oil pump drive (102504)
£41.57
Important compatibility info
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 475 mm |
| Weight | 0.053 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.58
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 4.42 kg |
| Surface | Coated |
| Number of mounting bores | 2 |
| Minimum thickness | 8.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Outer diameter | 262 mm |
| Placement on Vehicle | Rear Axle |
| Rotor Style | Solid |
| for OE number | 58411-39600 |
| Function | Brake Disc |
| Centering Diameter | 76 mm |
| Inner diameter | 168 mm |
| Brake Disc Thickness | 10 mm |
| Thickness | 61.2 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.58
Important compatibility info
| Additional Information 2 | with ball bearing, with fastening material |
| Placement on Vehicle | Front Axle Right |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Weight | 0.89 kg |
| Inner diameter | 33 mm |
| Material | Rubber/Metal |
| Width | 119 mm |
| Height | 65 mm |
| Length | 131 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (104215)
- 1x Febi Nut (174654)
- 3x Febi Nut (174655)
- 1x Febi Washer (174649)
£41.59
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 1.380 kg |
| Function | Repair Kit, guide strut |
| Type | Repair Kit, guide strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint, axle strut (17643)
£41.60
Important compatibility info
| External Thread Size | M8 x 1 |
| Function | Glow Plug |
| Type | Glow Plug |
| Glow Plug Type | after-glow capable |
| Voltage | 4.4 V |
| Spanner Size | 8 |
| Length | 30 mm |
| Weight | 0.020 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.61
Important compatibility info
| Function | Tensioner, timing chain |
| Operating Mode | Hydraulic |
| Weight | 0.144 kg |
| Length | 80 mm |
| Width | 27 mm |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.62
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023