Important compatibility info
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Ring, oil drain plug (35640)
- 1x Febi Fuel filter (26979)
- 1x Febi Fuel filter (31431)
- 1x Febi Oil Filter (35351)
- 1x Febi Oil Filter (176274)
- 1x Febi Gasket, manual transmission housing (103728)
- 1x Febi Seal Ring (35619)
Important compatibility info
| Thickness/Strength 1 | 19 mm |
| Function | Brake Pad Set, disc brake |
| Width | 68.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Placement on Vehicle | Front Axle |
| Inspection Tag | ECE R90 Approved |
| Length | 155.3 mm |
| Additional Information 2 | with piston clip |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 350 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Window Regulator |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Left Front |
| Paired article numbers | 177309 |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 177308 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Placement on Vehicle | Intake Side |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 645 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 21455 |
| Placement on Vehicle | Lower Front Axle, Right Rear |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 20 mm |
| External Thread Size | M14 x 1,5 |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with lock nut |
| Cone Size | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (02682)
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Function | Repair Kit, suspension strut support mount |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with fastening material, without ball bearing |
| Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (38394)
- 1x Febi Nut (173703)
- 3x Febi Screw (179911)
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 30515 |
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 238 mm |
| Thickness | 48.2 mm |
| Brake Disc Thickness | 18 mm |
| Minimum thickness | 17 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 200 mm |
| Width | 135 mm |
| Outer diameter | 64 mm |
| Number of Connectors / Ports | 2 |
| Number of mounting bores | 2 |
| Mounting points diameter | 6.4 mm |
| Type | Dryer, air conditioning |
| Function | Dryer, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 5 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Additional Information | with gasket/seal |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 570 mm |
| Outer diameter | 271 mm |
| Inner diameter | 177 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 35 mm |
| Outer diameter | 123 mm |
| Inner diameter | 30 mm |
| Function | Belt Pulley, alternator |
| Type | Belt Pulley, alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Teeth, Wheel Side | 28 |
| Placement on Vehicle | Wheel Side, Front Axle |
| Seal Diameter | 50 mm |
| Type | Joint Kit, drive shaft |
| Outer diameter | 99 mm |
| Length | 221 mm |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Pump, fuel pre-supply |
| Length | 125 mm |
| Width | 90 mm |
| Thickness | 95 mm |
| Inner diameter | 31 mm |
| Number of Holes | 3 |
| Bolt Hole Circle Diameter | 6 mm |
| Internal Thread Size | 2 x M12 x 1,5 |
| Type | Pump, fuel pre-supply |
| Additional Information | with seal rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with fastening/mounting material |
| Brake Type | Disc Brake |
| Parameter | Typ 24 |
| Type | Diaphragm Brake Cylinder |
| Piston Rod Length | 15 mm |
| Function | Diaphragm Brake Cylinder |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with crown nut |
| Placement on Vehicle | Front Axle |
| Function | Intermediate Steering Lever |
| Type | Intermediate Steering Lever |
| Spanner Size | 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Minimum thickness | 14 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Thickness | 62 mm |
| Brake Disc Thickness | 16 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 292 mm |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 68 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 05A 906 051 |
| Number of Connectors / Ports | 3 |
| Function | Sensor, fuel pressure |
| External Thread Size | M18 x 1,5 |
| Type | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 180651 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Right, Upper, Rear |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 180649 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Rear Axle Left, Upper, Rear |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Paired article numbers | 107972 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm |
| Thickness | 44 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19.8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 61 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| for OE number | 40 20 631 49R |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Type | Sensor, intake manifold pressure |
| Function | Sensor, intake manifold pressure |
| for OE number | L301-18-211B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 185630 |
| Brake caliper piston diameter | 54 mm |
| Function | Brake Caliper |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake caliper piston diameter | 54 mm |
| Function | Brake Caliper |
| Paired article numbers | 185629 |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 350 mm |
| Number of circuits | 15 |
| Function | Cable Repair Kit, tailgate |
| Extra Description | febi Plus |
| Type | Cable Repair Kit, tailgate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 17 mm |
| Water pump impeller material | Plastic |
| Number of Teeth | 104 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Belts | with trapezoidal tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11218)
- 1x Febi Water Pump, engine cooling (09260)
Important compatibility info
| Outer diameter | 28 mm |
| Inner diameter | 20 mm |
| Inner diameter 1 | 27 mm |
| Cooling Hose | from expansion tank to engine cooler |
| Function | Radiator Hose |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178107 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178106 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 11 V |
| Spanner Size | 9 |
| External Thread Size | M9 x 1 |
| Length | 152 mm |
| Function | Glow Plug |
| Type | Glow Plug |
| Glow Plug Type | after-glow capable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Glow Plug |
| Function | Glow Plug |
| Length | 137 mm |
| Voltage | 4.4 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Fitting Depth | 26.6 mm |
| Colour | Silver |
| Spanner Size | 8 |
| Voltage | 4.4 V |
| Length | 148 mm |
| External Thread Size | M8 x 1 |
| Function | Glow Plug |
| Type | Glow Plug |
| Glow Plug Type | after-glow capable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | with adjuster |
| Operating Mode | Electric |
| Paired article numbers | 199585 |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 6 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hole Spacing | 100 mm |
| Length | 140 mm |
| Width | 91 mm |
| Material | Rubber/Metal |
| Thickness | 176 mm |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 254 mm |
| Thickness | 43 mm |
| Brake Disc Thickness | 24.3 mm |
| Minimum thickness | 22.2 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 78.5 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Cable Length | 720 mm |
| Placement on Vehicle | before soot particulate filter |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
| Spanner Size | 17 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 176744 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Placement on Vehicle | Front Axle Left |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Splash Guard, brake disc |
| Paired article numbers | 176743 |
| Placement on Vehicle | Front Axle Right |
| Type | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 1344335080 |
| Placement on Vehicle | Rear |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Exterior Door Handle |
| Colour | Black |
| Material | Plastic |
| Placement on Vehicle | Front, Right |
| Function | Exterior Door Handle |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 60 |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Timing Chain Size | G44HCF |
| Extra Description | Basic Short Kit |
| Wet Boiling Point | 50 °C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (33896)
- 1x Febi Tensioner Guide, oil pump drive chain (44606)
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179267 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179266 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































