Important compatibility info
| Belts | with trapezoidal tooth profile |
| Width | 15 mm |
| Number of Teeth | 104 |
| Surface | Coated |
| Water pump impeller material | Plastic |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11071)
- 1x Febi Water Pump, engine cooling (10600)
Important compatibility info
| Function | Charge Air Hose |
| Outer diameter | 105 mm |
| Inner diameter | 81 mm |
| Type | Charge Air Hose |
| Hose Length | 165 mm |
| Wall Thickness | 2.4 mm |
| for OE number | 21768608 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Switch point to | 10 bar |
| Function | Oil Pressure Switch |
| Control Range | 0,7 +/- 0,15 bar |
| Number of Connectors / Ports | 2 |
| Outer diameter | 46 mm. 39.8 mm |
| Length | 80 mm |
| Spanner Size | 19 |
| External Thread Size | M14 x 1,5 |
| Thread Length | 12 mm |
| Type | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 177107 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Bore Diameter | 16 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Design | Spring-bearing Damper |
| Shock Absorber Mounting Type | Bottom eye, Top eye |
| Mounting bores distance | 523 mm |
| Max. Length | 523 mm |
| Min. Length | 321 mm |
| Pipe Diameter | 48 mm. 38 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 348 mm |
| Outer diameter | 169 mm |
| Number of Coils | 4.7 |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 13.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 418 mm |
| Width | 194 mm |
| Additional Information | with gasket/seal |
| Material | Aluminium |
| Thickness | 42 mm |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 370 mm |
| Core Width | 188 mm |
| Core Depth | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 22 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 290 mm |
| Thickness | 60 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 71 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Width | 59 mm |
| Length | 87 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (176337)
- 2x Febi Protective Cap/Bellow, shock absorber (175559)
Important compatibility info
| Function | Door Check |
| Mounting points diameter | 11 mm |
| Type | Door Check |
| Length | 172 mm |
| Placement on Vehicle | Left |
| Mounting bores distance | 107 mm. 46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 830 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178091 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Function | Brake Caliper |
| Paired article numbers | 178090 |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Front Axle Right |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Function | Mounting, automatic transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Caliper |
| Type | Brake Caliper |
| Paired article numbers | 178060 |
| Brake Caliper Type | Brake Caliper (1 piston), Brake Caliper with integrated parking brake |
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Left |
| Brake caliper piston diameter | 36 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston), Brake Caliper with integrated parking brake |
| Paired article numbers | 178059 |
| Placement on Vehicle | Rear Axle Right |
| Brake caliper piston diameter | 36 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 324 mm |
| Outer diameter | 69 mm |
| Filter type | In-Line Filter, with filter heating |
| Number of Connectors / Ports | 2 |
| Pipe Diameter | 8 mm |
| Type | Fuel filter |
| Housing material | Plastic |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering | with tie rod end |
| External Thread Size | M18 x 1,5, M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 40515 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (27159)
- 1x Febi Inner Tie Rod (27716)
- 1x Febi Bellow, steering (26506)
- 1x Febi Clamping Clip (38756)
- 1x Febi Clamping Clip (38764)
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | Rear Axle Left |
| Length | 160 mm |
| Paired article numbers | 46145 |
| Rod/Strut | Coupling Rod |
| Cone Size | 26 mm |
| Pipe Diameter | 26 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 160 mm |
| Paired article numbers | 46144 |
| Rod/Strut | Coupling Rod |
| Cone Size | 26 mm |
| Pipe Diameter | 26 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Rear |
| Additional Information | without electric motor |
| Function | Window Regulator |
| Type | Window Regulator |
| Operating Mode | Electric |
| Paired article numbers | 180216 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 180215 |
| Function | Window Regulator |
| Type | Window Regulator |
| Additional Information | without electric motor |
| Placement on Vehicle | Left Rear |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 30748811 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gaskets/seals |
| Material | Aluminium |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
| Core Length | 110 mm |
| Core Width | 70 mm |
| Core Depth | 47 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 66 |
| Type | Chain, oil pump drive |
| Function | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 30514 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 290 mm |
| Thickness | 56 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10.3 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
| Number of hoses | 2 |
| Placement on Vehicle | Rear Axle Left |
| Length | 346 mm |
| Paired article numbers | 172683 |
| Thread Length | 7 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Function | Washer Fluid Reservoir, window cleaning |
| Extra Description | febi Plus |
| Type | Washer Fluid Reservoir, window cleaning |
| Additional Information 2 | with lid |
| Section | Upper section |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Operating Mode | Electric |
| Length | 125 mm. 320 mm. 600 mm |
| Number of Connectors / Ports | 3 |
| Function | Control, seat height adjustment |
| Colour | Red, Black, Green |
| Type | Control, seat height adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 278 mm |
| Thickness | 53.8 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Front |
| Operating Mode | Manual |
| Extra Description | febi Plus |
| Paired article numbers | 174875 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Number of Wings | 8 |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 19822 |
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (11091)
- 1x Febi Securing Plate, ball joint (14238)
- 1x Febi Ball Joint (12658)
- 3x Febi Clamping Bolt, ball joint (07866)
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 292 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10.5 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 67.5 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 302 mm |
| Thickness | 40.7 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 9 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 262 mm |
| Thickness | 47 mm |
| Brake Disc Thickness | 21 mm |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 64 mm |
| Surface | Coated |
| Number of mounting bores | 4 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 245 mm |
| Brake Disc Thickness | 10 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 250 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 302 mm |
| Thickness | 40.6 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 9 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
| for OE number | 06 52 148 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 11973 |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing, with fastening material |
| Replaces | 37582 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (11971)
- 1x Febi Rolling Bearing, suspension strut support mount (11608)
- 2x Febi Screw (18550)
- 1x Febi Nut (05359)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (11350)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (34766)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Capacity | 0.4 l |
| Function | Pressure Accumulator, pneumatic suspension |
| Type | Pressure Accumulator, pneumatic suspension |
| Pressure | 50 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































