Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.13
Important compatibility info
| Placement on Vehicle | Front |
| Function | Repair Kit, driver cab suspension |
| Type | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.13
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 214.1 mm |
| Width | 88.7 mm |
| Additional Information 2 | with staples |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.13
Important compatibility info
| Function | EGR Valve |
| Type | EGR Valve |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.14
Important compatibility info
| Spanner Size | 22 |
| for OE number | 1628.8Z |
| Cable Length | 570 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.14
Important compatibility info
| Function | Ignition Coil |
| Number of Connectors / Ports | 3 |
| Ignition Coil | 4 Spark |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.15
Important compatibility info
| Thickness | 79 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 147 mm |
| Internal Thread Size | M18 x 1,5 |
| Function | Tie Rod End |
| Spanner Size | 21 |
| External Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.16
Important compatibility info
| Function | Charge Air Hose |
| Material | ACM (Polyacrylate) |
| Additional Information 2 | with quick couplers |
| Turbocharger line | Piping to charge air cooler |
| Type | Charge Air Hose |
| Placement on Vehicle | Charge Air Cooler, Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.16
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Bore Diameter | 26 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 532 mm |
| Max. Length | 532 mm |
| Min. Length | 323 mm |
| Pipe Diameter | 48 mm. 38 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.16
Important compatibility info
| Type | Pressure Converter, exhaust control |
| Function | Pressure Converter, exhaust control |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 2 |
| Voltage | 12 V |
| Operating Mode | Electric-pneumatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.16
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 47.5 mm |
| Outer diameter | 252 mm |
| Thickness | 53 mm |
| Inner diameter | 200 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55.1 mm |
| Number of mounting bores | 2 |
| Max.skimmed drum measure | 201 mm |
| Rim Hole Number | 4 -Hole |
| Type | Brake Drum |
| Function | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.17
Important compatibility info
| Additional Information | with gasket/seal, with temperature sensor |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.18
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Transmission-side joint diameter | 75.6 mm |
| Wheel Sided Joint Diameter | 76.4 mm |
| Min. Length | 582 mm |
| External Teeth, Diff.Side | 22 |
| Paired article numbers | 181290 |
| External Teeth, Wheel Side | 22 |
| Thread Size | M20x1,5 |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.18
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 283 mm |
| Thickness | 28 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 66 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.19
Important compatibility info
| Outer diameter | 281 mm |
| Height | 507 mm |
| Inner diameter | 147 mm |
| Function | Air Filter |
| Filter type | Filter Insert |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.19
Important compatibility info
| Spanner Size | 22 |
| for OE number | 1618.R0 |
| Cable Length | 400 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.19
Important compatibility info
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181145 |
| Function | Brake Caliper |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.19
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Aluminium |
| Brake caliper piston diameter | 38 mm |
| Paired article numbers | 181144 |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.19
Important compatibility info
| Placement on Vehicle | Front Axle |
| Thread Size | M10x1,5 |
| Internal Teeth, wheel side | 33 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.19
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Surface | Coated |
| Centering Diameter | 68 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Thickness | 44 mm |
| Outer diameter | 269 mm |
| Number of mounting bores | 2 |
| Minimum thickness | 19.8 mm |
| Brake Disc Thickness | 22 mm |
| Placement on Vehicle | Front Axle |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.19
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023