Proud to be a UK-based company
Contact us
Important compatibility info
| Hose Length | 123 mm |
| Placement on Vehicle | Charge Air Cooler, Right |
| Wall Thickness | 4 mm |
| Material | Silicone |
| Inner diameter | 80 mm |
| Type | Charge Air Hose |
| Function | Charge Air Hose |
| Turbocharger line | Turbocharger to charge air cooler |
| Colour | Red |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.40
Important compatibility info
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Material | PU (Polyurethane), Aluminium |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Inner diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.40
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 300 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.40
Important compatibility info
| Paired article numbers | 181168 |
| Placement on Vehicle | Rear Axle Left |
| Function | Brake Caliper |
| Brake caliper piston diameter | 42 mm |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.40
Important compatibility info
| Function | Joint Kit, drive shaft |
| Thread Size | M16x1,5 |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 28 |
| External Teeth, Wheel Side | 36 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.40
Important compatibility info
| Additional Information | with coolant level sensor |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | with lid |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.40
Important compatibility info
| External Thread Size | M20 x 1,5, M14 x 1,5 |
| Cone Size | 16 mm |
| Adjustable | adjustable |
| Type | Tie Rod |
| Function | Tie Rod |
| Cone Size 2 | 22 mm |
| Paired article numbers | 188255 |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (186129)
- 1x Febi Inner Tie Rod (180054)
£44.40
Important compatibility info
| Length | 143 mm |
| Height | 39 mm |
| Width | 87 mm |
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Type | Ignition Coil |
| for OE number | ZJ01-18-100A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.40
Important compatibility info
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.40
Important compatibility info
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.40
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023