Proud to be a UK-based company
Contact us
Important compatibility info
| Bolt Hole Circle Diameter | 114 mm |
| Thickness | 100 mm |
| Outer diameter | 139 mm |
| Additional Information 2 | without wheel bearing |
| Width | 139 mm |
| Type | Wheel Hub |
| Placement on Vehicle | Front Axle |
| Function | Wheel Hub |
| Inner diameter | 26.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.36
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 970 mm |
| Outer diameter | 25.7 mm |
| Type | Tie Rod |
| Steering | with tie rod ends |
| Cone Size | 14.5 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.36
Important compatibility info
| Outer diameter | 148 mm |
| Additional Information 2 | with screw |
| Inner diameter | 29 mm |
| Parameter | 7PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27229)
- 1x Febi Pulley Bolt (184361)
£47.36
Important compatibility info
| Function | Brake Caliper |
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 185989 |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.36
Important compatibility info
| Material | Plastic |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.36
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.36
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 24.5 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Function | Tensioner Pulley, timing belt |
| Outer diameter | 66 mm |
| Material | Plastic |
| Width | 32 mm |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
| for OE number | 06H 109 257 A |
| Number of Connectors / Ports | 1 |
| Valve type | Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Outer diameter | 60 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 5751.A2 |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Internal Thread Size | M56 x 3 |
| Paired article numbers | 43448 |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
| Placement on Vehicle | Right |
| Inner diameter | 40 mm. 52 mm |
| Material | Steel |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Length | 150 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
| Material | Rubber/Metal |
| Thickness | 90 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Placement on Vehicle | Front, Left |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| External Thread Size | M12 x 1,5 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Placement on Vehicle | Left Front, Lower, Rear |
| Colour | Orange |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Placement on Vehicle | Upper Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| for OE number | 11 35 682 80R |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Cone Size 2 | 17 mm |
| Additional Information | with lock nut, with rubber mounts |
| External Thread Size | M12 x 1,75 |
| Steering arm type | Control Arm |
| Paired article numbers | 185763 |
| Cone Size | 14 mm |
| Placement on Vehicle | Front Axle Right, Upper |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Material | Steel |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Additional Information | with gasket/seal |
| Outer diameter | 38.5 mm |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Opening Temperature | 105 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Placement on Vehicle | Upper |
| Material | PE (Polyethylene) |
| Type | Charge Air Hose |
| Hose Length | 430 mm |
| Wall Thickness | 6.5 mm |
| Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 38 |
| Internal Teeth, wheel side | 28 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| External Thread Size | M10 x 1,5 |
| for OE number | 1 099 547 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 147 mm |
| Thickness | 83 mm |
| Inner diameter | 32.5 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Function | Wheel Hub |
| Outer diameter 1 | 45 mm |
| Internal Thread Size | M14 x 1,25 |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
| for OE number | 33 41 6 867 262 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.38
Important compatibility info
| Spanner Size | 22 |
| for OE number | 55 351 836 |
| Cable Length | 400 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.39
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Length | 105 mm |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.39
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Outer diameter | 75 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Width of castor bearing surface | 36 mm |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 906 200 46 70 |
| for SA code | 505072 02, 505072 13, 505072 14, 505072 35 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.40
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 380 mm |
| Rod/Strut | Coupling Rod |
| Cone Size | 28.9 mm |
| Pipe Diameter | 36 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (27253)
- 2x Febi Nut, stabiliser bar (27249)
£47.40
Important compatibility info
| Bore Diameter | 16 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.40
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 60.4 mm |
| Outer diameter | 129 mm |
| Inner diameter | 32 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 108 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (29383)
- 1x Febi Nut, kingpin (10178)
- 1x Febi Cap, wheel bearing (28502)
£47.41
Important compatibility info
| Additional Information 2 | with lid |
| Width | 38.2 mm |
| Outer diameter | 55 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Tightening Torque | 85 Nm |
| Function | Alternator Freewheel Clutch |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.41
Important compatibility info
| Placement on Vehicle | Rear, both sides |
| Cable Length | 200 mm |
| Number of circuits | 11 |
| Type | Cable Repair Set, door |
| Function | Cable Repair Set, door |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.41
Important compatibility info
| Additional Information 2 | with fastening material |
| Placement on Vehicle | Rear Axle |
| Length | 131.9 mm |
| Width | 70 mm. 60.2 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.6 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.41
Important compatibility info
| Height | 235 mm |
| Function | Fuel filter |
| Housing material | Metal |
| Type | Fuel filter |
| Pipe Diameter | 10 mm |
| Outer diameter | 108 mm |
| Additional Information 2 | with seal ring |
| Filter type | In-Line Filter, with water drain screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.41
Important compatibility info
| Function | Belt Tensioner, V-ribbed belt |
| Material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Outer diameter | 64 mm |
| Width of castor bearing surface | 26 mm |
| Operating Mode | Automatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.41
Important compatibility info
| Length | 145 mm |
| Number of Connectors / Ports | 3 |
| Function | Adapter Cable, air supply control flap |
| Type | Adapter Cable, air supply control flap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.42
Important compatibility info
| Outer diameter | 30 mm |
| Stroke | 45 mm |
| Function | Slave Cylinder |
| Type | Slave Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.43
Important compatibility info
| Material | Aluminium |
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.44
Important compatibility info
| for OE number | 059 130 758 K |
| Number of Connectors / Ports | 3 |
| External Thread Size | M12 x 1,5 |
| Function | Sensor, fuel pressure |
| Type | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.44
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 664 mm |
| Housing Diameter | 22 mm |
| Eject Force | 455 N |
| Stroke | 249 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 384 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.44
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Front |
| External Thread Size | M10 x 1,25 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.45
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.46
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 12.5 mm |
| Mounting points diameter | 12 mm |
| Min. Length | 228 mm |
| Max. Length | 310 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Pipe Diameter | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.46
Important compatibility info
| External Thread Size | M16 x 1,5 |
| for OE number | 21634017 |
| Spanner Size | 27 |
| Type | Sensor, oil pressure |
| Function | Sensor, oil pressure |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.47
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left, Rear |
| Material | Aluminium |
| Outer diameter | 29 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 11351 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (10073)
£47.48
Important compatibility info
| Length | 1925 mm |
| Function | V-Belt |
| Type | V-Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 192.3 mm. 193 mm |
| Width | 96.6 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm. 19.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 282 mm |
| Thickness | 47 mm |
| Brake Disc Thickness | 23 mm |
| Minimum thickness | 21 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 309 mm |
| Thickness | 62.4 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.5 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Surface | Coated |
| Centering Diameter | 65 mm |
| Minimum thickness | 21 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
| Thickness | 44 mm |
| Outer diameter | 276 mm |
| Placement on Vehicle | Front Axle |
| Rotor Style | Internally Vented |
| Brake Disc Thickness | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
Important compatibility info
| Type | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178113 |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
Important compatibility info
| Type | Control Element, parking brake caliper |
| Extra Description | febi Plus |
| Function | Control Element, parking brake caliper |
| Number of Teeth | 6 |
| Placement on Vehicle | Rear Axle Left |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 196814 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
Important compatibility info
| Paired article numbers | 196813 |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Right |
| Type | Control Element, parking brake caliper |
| Extra Description | febi Plus |
| Function | Control Element, parking brake caliper |
| Number of Teeth | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023