Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 14 mm |
| Pipe Diameter | 40 mm. 46 mm |
| Min. Length | 193 mm |
| Max. Length | 239 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 1.0 kg |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Housing Diameter | 18 mm |
| Stroke | 231 mm |
| Eject Force | 420 N |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.2 kg |
| Placement on Vehicle | both sides |
| Length | 604 mm |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 18 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 327 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Voltage | 24 V |
| Weight | 0.1 kg |
| Type | Repair Kit, air dryer |
| Function | Repair Kit, air dryer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Core Depth | 42 mm |
| Core Width | 370 mm |
| Core Length | 188 mm |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Weight | 1.048 kg |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Weight | 0.62 kg |
| Outer diameter | 60 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 5751.A2 |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Additional Information 2 | with ball joint |
| Paired article numbers | 180986 |
| Additional Information | with rubber mounts |
| Steering arm type | Control Arm |
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Sheet Steel |
| Weight | 3.97 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Weight | 0.666 kg |
| Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Expansion Tank, coolant (172165)
- 1x Febi Cap, coolant tank (40722)
£49.34
Important compatibility info
| Weight | 4.39 kg |
| Placement on Vehicle | Rear Axle |
| Length | 435 mm |
| Rod/Strut | Coupling Rod |
| Cone Size | 28.6 mm |
| Pipe Diameter | 36 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M22 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (27252)
- 2x Febi Nut, stabiliser bar (27249)
£49.34
Important compatibility info
| Length | 143 mm |
| Outer diameter | 75 mm |
| Internal Teeth, wheel side | 28 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M18 x 1,5 |
| Weight | 1.79 kg |
| Seal Diameter | 49 mm |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Weight | 0.906 kg |
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (36562)
- 1x Febi Oil Filter (37257)
- 1x Febi Air Filter (30992)
- 1x Febi Fuel filter (17635)
- 1x Febi Screw Plug, oil sump (04572)
- 1x Febi Filter, cabin air (17263)
- 4x Febi Spark Plug (13536)
£49.34
Important compatibility info
| for OE number | 7PP 819 810 A |
| Weight | 0.182 kg |
| Type | Coolant Control Valve |
| Function | Coolant Control Valve |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 180938 |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Additional Information | with rubber mounts |
| Weight | 3.97 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Material | Aluminium |
| Paired article numbers | 183624 |
| Steering arm type | Control Arm |
| Additional Information 2 | with bearing, with ball joint |
| Placement on Vehicle | Rear, Front Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 1.382 kg |
| Additional Information | with lock nut |
| Cone Size | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 556 mm |
| Weight | 0.2 kg |
| Housing Diameter | 18 mm |
| Eject Force | 575 N |
| Stroke | 179 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 306 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Placement on Vehicle | Upper |
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Weight | 0.149 kg |
| Extra Description | febi Plus |
| for OE number | 06E 109 257 L |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Metal |
| Weight | 0.7 kg |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Weight | 1.870 kg |
| Width of castor bearing surface | 38 mm |
| Track rollers material | Metal |
| Outer diameter | 74 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Type | Window Regulator |
| Function | Window Regulator |
| Weight | 1.58 kg |
| Paired article numbers | 175586 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Length | 212 mm |
| Additional Information 2 | with oil sump gasket |
| Type | Hydraulic Filter Kit, automatic transmission |
| Weight | 0.19 kg |
| Height | 76 mm |
| Width | 105 mm |
| Filter type | Screen Filter |
| Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.35
Important compatibility info
| Length | 134 mm |
| External Thread Size | M10 x 1 |
| Function | Glow Plug |
| Voltage | 5.4 V |
| Spanner Size | 10 |
| Weight | 0.035 kg |
| Glow Plug Type | Metal glow plug |
| Type | Glow Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.36
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 5.26 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 269 mm |
| Thickness | 53.8 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.36
Important compatibility info
| Length | 682 mm |
| External Thread Size | M22 x 1,5 |
| Function | Brake Shaft, drum brake |
| Screw length below head | 618 mm |
| Type | Brake Shaft, drum brake |
| Paired article numbers | 10479 |
| Number of Teeth | 10 |
| Outer diameter | 66 mm |
| Placement on Vehicle | Right |
| Weight | 6.76 kg |
| Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.39
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.105 kg |
| Cable Length | 540 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.39
Important compatibility info
| Weight | 6.76 kg |
| External Thread Size | M22 x 1,5 |
| Placement on Vehicle | Left |
| Paired article numbers | 10480 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Length | 682 mm |
| Outer diameter | 66 mm |
| Number of Teeth | 10 |
| Screw length below head | 618 mm |
| Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.39
Important compatibility info
| Weight | 0.889 kg |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 11 28 7 558 752 |
| Width of castor bearing surface | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.41
Important compatibility info
| Weight | 0.68 kg |
| Number of Ribs | 5 |
| Function | Alternator Freewheel Clutch |
| Inner diameter | 15 mm |
| Outer diameter | 59 mm |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.43
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Paired article numbers | 177838 |
| Weight | 3.5 kg |
| Additional Information 2 | with ball joint, with rubber mount |
| Steering arm type | Triangular Control Arm (CV), Control Arm |
| Cone Size | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.44
Important compatibility info
| Function | Holder, Wheel Chock |
| Depth | 165 mm |
| Colour | Black |
| Width | 314 mm |
| Type | Holder, Wheel Chock |
| Material | Sheet Steel |
| Extra Description | febi Plus |
| Height | 235 mm |
| Weight | 1.604 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.45
Important compatibility info
| Width of castor bearing surface | 24 mm |
| Width | 100 mm |
| Material | Metal |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Weight | 0.398 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.45
Important compatibility info
| Weight | 0.895 kg |
| Length | 276 mm |
| Outer diameter | 104 mm |
| Voltage | 24 V |
| Function | Interior Blower |
| Type | Interior Blower |
| for OE number | 000 830 93 08 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.46
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178161 |
| Weight | 1.835 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.46
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178159 |
| Weight | 1.835 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.46
Important compatibility info
| Weight | 1.94 kg |
| Type | Brake Caliper |
| Paired article numbers | 181698 |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake caliper piston diameter | 48 mm |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.46
Important compatibility info
| Type | Brake Caliper |
| Weight | 1.94 kg |
| Paired article numbers | 181697 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake caliper piston diameter | 48 mm |
| Function | Brake Caliper |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.46
Important compatibility info
| Number of Connectors / Ports | 10 |
| Weight | 0.087 kg |
| Control Type | Rotary Operation |
| Type | Switch, headlight |
| Function | Switch, headlight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.47
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 363 mm |
| Weight | 3.81 kg |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 14.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.48
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 1.79 kg |
| Type | Mounting, engine |
| for OE number | 1363376080 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.48
Important compatibility info
| Weight | 0.878 kg |
| Placement on Vehicle | Front, both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Replaces | 19456 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.48
Important compatibility info
| Weight | 1.664 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 06 82 065 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.49
Important compatibility info
| Weight | 6.04 kg |
| Outer diameter | 285 mm |
| Thickness | 55.5 mm |
| Placement on Vehicle | Rear Axle |
| Minimum thickness | 13 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Brake Disc Thickness | 15 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.51
Important compatibility info
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
| Weight | 0.20 kg |
| Number of Connectors / Ports | 10. 4 |
| Colour | Black |
| Material | Plastic |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.53
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Weight | 1.052 kg |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.53
Important compatibility info
| Weight | 2.510 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 59 mm |
| Outer diameter | 67 mm |
| Inner diameter | 44 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.54
Important compatibility info
| Weight | 0.425 kg |
| Material | Plastic |
| Colour | Black |
| Function | Oil Separator, crankcase ventilation |
| Additional Information | with gasket/seal |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.54
Important compatibility info
| Weight | 2.355 kg |
| Height | 482 mm |
| Outer diameter | 264 mm |
| Inner diameter | 173 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.54
Important compatibility info
| External Thread Size | M12 x 1,5 |
| for OE number | 059 130 758 E |
| Weight | 0.044 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, fuel pressure |
| Type | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.57
Important compatibility info
| Number of Connectors / Ports | 3 |
| Weight | 0.038 kg |
| Type | Sensor, fuel pressure |
| for OE number | 16 63 930 24R |
| Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.57
Important compatibility info
| Paired article numbers | 181175 |
| Placement on Vehicle | Rear Axle Left |
| Weight | 1.590 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 43 mm |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.58
Important compatibility info
| Brake caliper piston diameter | 43 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Paired article numbers | 181174 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Weight | 1.590 kg |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.58
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.127 kg |
| for OE number | 000 540 64 17 |
| Cable Length | 900 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.59
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023