Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 16 |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 0.75 mm² |
| Function | Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.37
Important compatibility info
| Outer diameter 2 | 152 mm |
| Outer diameter 1 | 62 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 28 mm |
| Width | 60 mm |
| Outer diameter | 76 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut, kingpin (173781)
- 1x Febi Wheel Bearing Kit (173916)
£62.37
Important compatibility info
| Width | 25.4 mm |
| Number of Teeth | 141 |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Units / Pulleys | incl. deflection pulley, incl. tensioner pulley |
| Function | Timing Belt Kit |
| Belts | with trapezoidal tooth profile |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (37285)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37275)
- 1x Febi Tensioner Pulley, timing belt (39101)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (199866)
£62.39
Important compatibility info
| Number of Connectors / Ports | 4 |
| Height | 162 mm |
| Material | Paper |
| Outer diameter | 111 mm |
| Filter type | In-Line Filter |
| Pipe Diameter | 8 mm. 9.5 mm |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.39
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 589 mm |
| Housing Diameter | 18 mm |
| Eject Force | 415 N |
| Stroke | 230 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 333 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.40
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.40
Important compatibility info
| Outer diameter | 86 mm |
| Inner diameter | 50 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing |
| Width | 55.2 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.41
Important compatibility info
| Width | 322 mm |
| Type | Hydraulic Filter, automatic transmission |
| Transmission Type | Automatic Transmission |
| Extra Description | febi Plus |
| Function | Hydraulic Filter, automatic transmission |
| Additional Information 2 | with bolts/screws |
| Additional Information | with gasket/seal, Oil sump with permanently integrated filter element, with oil drain plug |
| Filter type | Screen Filter |
| Length | 449 mm |
| Height | 58 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.41
Important compatibility info
| Material | Metal |
| Operating Mode | Automatic |
| Type | Vibration Damper, v-ribbed belt |
| Function | Vibration Damper, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.41
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.41
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.42
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Placement on Vehicle | Right |
| Inner length 1 | 939 mm |
| Outer length 1 | 1289 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.42
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.44
Important compatibility info
| Length | 304 mm |
| Height | 104 mm |
| Width | 131 mm |
| Additional Information | with gasket/seal, with oil filter, with oil cooler |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.44
Important compatibility info
| Replaces | 12439 |
| Cone Size | 18 mm |
| Pipe Diameter | 32 mm |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle |
| Length | 1352 mm |
| Additional Information 2 | with crown nut |
| External Thread Size | M14 x 1,5, M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.44
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 30517 |
| Function | Control/Trailing Arm, wheel suspension |
| Rod/Strut | Pull Rod |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with screw, with bearing |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.45
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 30.2 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Width | 118 mm |
| Length | 249.5 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.45
Important compatibility info
| Number of Connectors / Ports | 13 |
| Combi Switch Function | with klaxon, with indicator function, with high beam function, with light dimmer function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.47
Important compatibility info
| Type | Oxygen Sensor |
| Cable Length | 710 mm |
| Function | Oxygen Sensor |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.47
Important compatibility info
| Fill Medium | Brake Fluid |
| Type | Master Cylinder, clutch |
| Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.49
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023