Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.58 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 112 |
| Timing Chain Size | G68HPF, G68HR |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| for OE number | 1 138 760 |
| Weight | 0.360 kg |
| Function | Tensioner, timing chain |
| Operating Mode | Hydraulic |
| Type | Tensioner, timing chain |
Additional Information
Technical Information
The correct chain tensioner has to be ascertained by the vehicle manufacturer using the VIN and looking up the according service manual.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 4.300 kg |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 21682 |
| Additional Information | with rubber mounts |
| Replaces | 22459 |
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 3.1 kg |
| Additional Information 2 | Self-adjusting |
| Placement on Vehicle | Left |
| Operating Mode | Automatic |
| Paired article numbers | 31609 |
| Type | Adjuster, braking system |
| Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 2.320 kg |
| Function | Gasket Set, wheel hub |
| Placement on Vehicle | Rear Axle |
| Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, drive shaft (38541)
- 1x Febi Shaft Seal, wheel hub (24758)
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Sensor Ring, ABS (18612)
£56.22
Important compatibility info
| Weight | 5.560 kg |
| Cone Size | 26 mm |
| Placement on Vehicle | Front Axle |
| Adjustable | Adjustable on one side |
| Length | 865 mm |
| Thread Size | M20 x 1,5 |
| Rod/Strut | Push Rod |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
| Operating Mode | Automatic |
| Paired article numbers | 175153 |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 3.02 kg |
| Placement on Vehicle | Right |
| Operating Mode | Automatic |
| Paired article numbers | 31614 |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
| Additional Information 2 | Self-adjusting |
| Replaces | 31594 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Function | Belt Tensioner, V-ribbed belt |
| Material | Metal |
| Width of castor bearing surface | 46 mm |
| Type | Belt Tensioner, V-ribbed belt |
| Weight | 2.036 kg |
| Operating Mode | Automatic |
| Outer diameter | 74 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Paired article numbers | 35119 |
| Weight | 3.502 kg |
| Operating Mode | Automatic |
| Placement on Vehicle | Front Axle Right |
| Length | 235 mm |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Paired article numbers | 10876 |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower Front Axle, Left |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Weight | 5.387 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Function | Timing Chain |
| Number of Chain Links | 124 |
| Type | Timing Chain |
| Chain Type | Simplex, Closed chain |
| Weight | 0.513 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 1.645 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 145 mm. 42 mm |
| Thickness | 79 mm |
| Additional Information 2 | without wheel bearing |
| Number of Holes | 6 |
| Number of Teeth | 27 |
| Internal Thread Size | M12 x 1,5 |
| Function | Wheel Hub |
| Type | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Additional Information 2 | Self-adjusting |
| Placement on Vehicle | Right |
| Operating Mode | Automatic |
| Paired article numbers | 31608 |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
| Weight | 3.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 3.038 kg |
| Operating Mode | Automatic |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 3.5 kg |
| Placement on Vehicle | Rear Axle Right |
| Length | 222 mm |
| Operating Mode | Automatic |
| Paired article numbers | 35110 |
| Function | Adjuster, braking system |
| Hole Spacing | 160 mm |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 1.211 kg |
| Function | Repair Kit, kingpin |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Kingpin (01543)
- 4x Febi Bush, kingpin (01544)
- 4x Febi Lock Ring, steering knuckle (01551)
- 4x Febi Seal Ring, steering knuckle (01552)
£56.22
Important compatibility info
| Track rollers material | Metal |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Weight | 2.118 kg |
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Mounting points diameter | 10 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 38 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 0.42 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 44 |
| Timing Chain Size | Z53R |
| Type | Chain Kit, oil pump drive |
| Function | Chain Kit, oil pump drive |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (48334)
- 1x Febi Sprocket, crankshaft (48743)
- 1x Febi Sprocket/Gear, oil pump (48332)
- 1x Febi Screw (48337)
- 1x Febi Centering Bolt, crankshaft pulley (33618)
£56.22
Important compatibility info
| Weight | 1.85 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 145 mm |
| Thickness | 93 mm |
| Number of Holes | 6 |
| Number of Teeth | 30 |
| Internal Thread Size | M12 x 1,5 |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 3.24 kg |
| Placement on Vehicle | Right, Rear Axle |
| Operating Mode | Automatic |
| Paired article numbers | 31616 |
| Function | Adjuster, braking system |
| Additional Information 2 | Self-adjusting |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Length | 237 mm |
| Outer diameter | 37 mm. 48 mm |
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 3.15 kg |
| Additional Information 2 | without bearing |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (10494)
- 1x Febi Bush, kingpin (10495)
- 1x Febi Bush, kingpin (14441)
- 1x Febi Bush, kingpin (14442)
- 1x Febi Seal Ring, steering knuckle (14438)
- 1x Febi Seal Ring, steering knuckle (14439)
- 1x Febi Seal Ring (14437)
- 1x Febi Seal Ring, steering knuckle (14432)
- 1x Febi Seal Ring, steering knuckle (14431)
- 1x Febi Spacer, kingpin (14443)
- 2x Febi Spacer, kingpin (14434)
- 2x Febi Spacer, kingpin (14435)
- 2x Febi Spacer, kingpin (14436)
- 2x Febi Spacer, kingpin (14468)
- 1x Febi Split Pin (14433)
£56.22
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 178689 |
| Operating Mode | Automatic |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
| Weight | 3.123 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 666 mm |
| Weight | 0.2 kg |
| Housing Diameter | 18 mm |
| Eject Force | 490 N |
| Stroke | 200 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 378.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Operating Mode | Automatic |
| Paired article numbers | 175148 |
| Type | Adjuster, braking system |
| Function | Adjuster, braking system |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 0.933 kg |
| Additional Information | with gasket/seal |
| Number of Ribs | 20 |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 0.355 kg |
| Height | 98 mm |
| Width | 122 mm |
| Inspection Tag | EMC, ADR |
| Port / Connector type | DIN Connector |
| Rated Power | 12 W |
| Light Design | LED |
| Voltage from | 9 V |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP67 |
| Type | Rotating Beacon |
| Fulfils ECE norm | R65, R10 |
| Temperature range from | -30 °C |
| Temperature range to | 50 °C |
| Function | Rotating Beacon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Type | Link/Coupling Rod, stabiliser bar |
| Weight | 3.500 kg |
| Rod/Strut | Coupling Rod |
| Paired article numbers | 181535 |
| Inner diameter 1 | 16 mm |
| Inner diameter 2 | 18 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 430 mm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 255 mm |
| Operating Mode | Automatic |
| Paired article numbers | 35107 |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
| Weight | 3.5 kg |
| Hole Spacing | 160 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 43637 |
| Function | Adjuster, braking system |
| Length | 202 mm |
| Operating Mode | Automatic |
| Weight | 3.440 kg |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 1.800 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.23
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Paired article numbers | 26802 |
| Bearing/Mounting Type | Hydro Mount |
| Weight | 0.718 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.23
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter | 86 mm |
| Width | 37 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter | 50 mm |
| Bearing Type | Tapered Roller Bearing |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Weight | 4.460 kg |
| Outer diameter 1 | 67 mm |
| Outer diameter 2 | 169 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.25
Important compatibility info
| Weight | 0.3 kg |
| Function | Tensioner, timing belt |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.26
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 7.100 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 278 mm |
| Thickness | 48.5 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.26
Important compatibility info
| Weight | 6.85 kg |
| Thickness | 47.6 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24.2 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Function | Brake Disc |
| Placement on Vehicle | Front Axle |
| Outer diameter | 281 mm |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.26
Important compatibility info
| Outer diameter | 156 mm |
| Thickness | 44 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Weight | 2.290 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.28
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.519 kg |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle |
| Length | 124 mm |
| Width | 78 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.32
Important compatibility info
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Paired article numbers | 197196 |
| Number of Connectors / Ports | 6 |
| Weight | 0.6 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.32
Important compatibility info
| Weight | 0.140 kg |
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.32
Important compatibility info
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Paired article numbers | 197195 |
| Number of Connectors / Ports | 6 |
| Weight | 0.6 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.32
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
| Weight | 0.036 kg |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.32
Important compatibility info
| Weight | 3.360 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (47013)
- 1x Febi Camber Correction Screw (37216)
£56.34
Important compatibility info
| Weight | 1.188 kg |
| Placement on Vehicle | Front, both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.35
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.104 kg |
| Cable Length | 803 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.35
Important compatibility info
| Surface | Coated |
| Centering Diameter | 62 mm |
| Minimum thickness | 10.5 mm |
| Brake Disc Thickness | 12 mm |
| Weight | 5.320 kg |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Bolt Hole Circle Diameter | 114.3 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 290 mm |
| Thickness | 53.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.35
Important compatibility info
| Weight | 7.8 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 305 mm |
| Thickness | 44.7 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.35
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Weight | 1.500 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.36
Important compatibility info
| Outer diameter | 138 mm |
| Thickness | 44.5 mm |
| Inner diameter | 25 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Weight | 1.47 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.36
Important compatibility info
| Surface | Coated |
| Weight | 4.06 kg |
| Rim Hole Number | 4 -Hole |
| Thickness | 38.3 mm |
| Brake Disc Thickness | 17 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Number of mounting bores | 2 |
| Minimum thickness | 15 mm |
| Outer diameter | 257 mm |
| Placement on Vehicle | Front Axle |
| Centering Diameter | 64 mm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.38
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023