Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 526 mm |
| Outer diameter | 206 mm |
| Weight | 6.0 kg |
| Function | Air Tank, compressed-air system |
| Capacity | 15 l |
| Material | Steel |
| Number of Connectors / Ports | 4 |
| Operating Pressure | 15.5 bar |
| Internal Thread Size | M22 x 1,5 |
| Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.65
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 0.840 kg |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.65
Important compatibility info
| Weight | 0.07 kg |
| Placement on Vehicle | before exhaust turbocharger |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| for OE number | 03L 906 088 BT |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.65
Important compatibility info
| Additional Information | with gaskets/seals |
| Weight | 0.25 kg |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.65
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.098 kg |
| Cable Length | 695 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.66
Important compatibility info
| Weight | 3.50 kg |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 85 mm |
| Outer diameter | 137 mm |
| Inner diameter | 30 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 105 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.66
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Weight | 7.5 kg |
| Length | 493 mm |
| Material | Steel |
| Outer diameter | 246 mm |
| Capacity | 20 l |
| Operating Pressure | 15.5 bar |
| Function | Air Tank, compressed-air system |
| Type | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.66
Important compatibility info
| Weight | 6.339 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 288 mm |
| Thickness | 44 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.67
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 294 mm |
| Thickness | 43 mm |
| Brake Disc Thickness | 24.3 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 82.1 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Weight | 7.0 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.67
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake caliper piston diameter | 54 mm |
| Function | Brake Caliper |
| Weight | 3.394 kg |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 186225 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.67
Important compatibility info
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Front Axle Right |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Weight | 3.394 kg |
| Paired article numbers | 186224 |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.67
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Weight | 6.820 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 297 mm |
| Thickness | 67.3 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 108 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.67
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 273 mm |
| Thickness | 49.2 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Weight | 6.550 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.67
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Repait Kit, spring bearing frame |
| Weight | 1.0965 kg |
| Type | Repait Kit, spring bearing frame |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, leaf spring (35615)
- 2x Febi Shaft Seal (44580)
- 1x Febi Grease Nipple (01096)
- 1x Febi Seal Ring, wheel hub (44681)
£56.69
Important compatibility info
| Rolling piston material | Plastic |
| External Thread Size | M22 x 1,5, M12 x 1,75, M16 x 2 |
| Additional Information | with piston |
| Function | Bellow, air suspension |
| Thickness | 340 mm. 560 mm |
| Outer diameter | 258 mm |
| Weight | 8.4 kg |
| Type | Bellow, air suspension |
| Replaces | 108691 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.70
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Function | Oxygen Sensor |
| Number of Connectors / Ports | 4 |
| Weight | 0.1 kg |
| for OE number | 96423429 |
| Cable Length | 400 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.70
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Weight | 1.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.70
Important compatibility info
| Weight | 2.101 kg |
| Width | 20 mm |
| Bearing Type | Rolling Bearing |
| Type | Suspension, propshaft |
| Inner diameter | 45 mm |
| Outer diameter | 58 mm |
| Additional Information 2 | with ball bearing |
| Function | Suspension, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.71
Important compatibility info
| Width | 22.2 mm. 22.1 mm. 12.3 mm |
| Outer diameter | 53.3 mm. 49.1 mm. 62.8 mm |
| Inner diameter | 42.5 mm |
| Weight | 0.17 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Repair Kit, axle beam |
| Type | Repair Kit, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.72
Important compatibility info
| Placement on Vehicle | Right Rear, Left Rear |
| Length | 2160 mm |
| Weight | 1.22 kg |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.74
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Paired article numbers | 36823 |
| Weight | 1.224 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.77
Important compatibility info
| Weight | 0.117 kg |
| Number of Connectors / Ports | 2 |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| for OE number | 15330-47020 |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.77
Important compatibility info
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Seal Material | Paper |
| Water pump impeller material | Metal |
| Weight | 0.51 kg |
| Number of Wings | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.77
Important compatibility info
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Weight | 3.438 kg |
| Bolt Hole Circle Diameter | 112 mm |
| Inner diameter | 30 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Outer diameter | 95 mm |
| Width | 43 mm |
| Outer diameter 1 | 67 mm |
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 143 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.77
Important compatibility info
| Paired article numbers | 182114 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 24 |
| Weight | 4.768 kg |
| External Teeth, Diff.Side | 23 |
| Min. Length | 838 mm |
| Wheel Sided Joint Diameter | 71.9 mm |
| Transmission-side joint diameter | 70 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.78
Important compatibility info
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Intake Side |
| Weight | 0.182 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.79
Important compatibility info
| Weight | 0.373 kg |
| Number of mounting bores | 2 |
| Type | Central Slave Cylinder, clutch |
| Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.81
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M16x1,5 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Bolt Hole Circle Diameter | 100 mm |
| Paired article numbers | 181245 |
| Bore Diameter | 10.9 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 7.340 kg |
| Min. Length | 757 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 81.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.82
Important compatibility info
| Additional Information 2 | with ball bearing |
| Inner diameter | 30 mm |
| Length | 165 mm |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Weight | 0.450 kg |
| Hole Spacing | 145 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (186476)
- 1x Febi Bearing, propshaft centre bearing (05362)
£56.84
Important compatibility info
| Weight | 2.30 kg |
| Outer diameter | 153 mm |
| Thickness | 28.5 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 6PK |
| Number of Ribs | 5 |
| Inner diameter | 30 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.84
Important compatibility info
| Brake caliper piston diameter | 34 mm |
| Function | Brake Caliper |
| Paired article numbers | 181957 |
| Weight | 1.240 kg |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.85
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Weight | 1.240 kg |
| Brake caliper piston diameter | 34 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Aluminium |
| Paired article numbers | 181956 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.85
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Weight | 0.045 kg |
| Cable Length | 850 mm |
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.85
Important compatibility info
| Weight | 1.246 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Front |
| Function | Bush Set, axle beam |
| Material | Rubber/Metal |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (22666)
- 2x Febi Screw (22488)
£56.86
Important compatibility info
| Weight | 5.57 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40103 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with lock nut, with rubber mounts |
| Additional Information 2 | with ball joint, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Screw (32561)
- 1x Febi Screw (32562)
- 1x Febi Screw (39865)
- 1x Febi Control/Trailing Arm, wheel suspension (37182)
£56.88
Important compatibility info
| Weight | 5.57 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40104 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holder, with lock nut |
| Additional Information 2 | with ball joint, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Screw (32561)
- 1x Febi Screw (32562)
- 1x Febi Screw (39865)
- 1x Febi Control/Trailing Arm, wheel suspension (37183)
£56.88
Important compatibility info
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Weight | 2.32 kg |
| Paired article numbers | 182051 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.88
Important compatibility info
| Weight | 2.32 kg |
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Right |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Paired article numbers | 182050 |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.88
Important compatibility info
| Rotor Style | Solid |
| Weight | 5.25 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 68 mm |
| Brake Disc Thickness | 10 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.88
Important compatibility info
| Outer diameter | 131 mm |
| Additional Information 2 | without wheel bearing |
| Inner diameter | 38.5 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Weight | 1.567 kg |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.90
Important compatibility info
| Weight | 0.071 kg |
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| for OE number | 03G 906 088 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.92
Important compatibility info
| Weight | 1.3 kg |
| Voltage | 12 V |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 2 |
| Rated Power | 280 W |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.93
Important compatibility info
| Additional Information 2 | with gear |
| Function | Oil Pump |
| Type | Oil Pump |
| for OE number | 15 01 062 49R |
| Weight | 0.959 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.93
Important compatibility info
| Function | Resistor, interior blower |
| Type | Resistor, interior blower |
| Extra Description | febi Plus |
| for OE number | 7L0 907 521 B |
| Weight | 0.194 kg |
| Number of Connectors / Ports | 2. 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.93
Important compatibility info
| Hole Spacing | 194 mm |
| Inner diameter | 55 mm |
| Weight | 1.964 kg |
| Function | Suspension, propshaft |
| Bearing Type | Rolling Bearing |
| for OE number | 1408 525 |
| Length | 234 mm |
| Additional Information 2 | with rolling bearing |
| Type | Suspension, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.94
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Weight | 0.335 kg |
| Function | Water Recirculation Pump, parking heater |
| for OE number | 251 965 561 B |
| Type | Water Recirculation Pump, parking heater |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.94
Important compatibility info
| External Teeth, Diff.Side | 24 |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 5.458 kg |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Min. Length | 618 mm |
| Wheel Sided Joint Diameter | 86 mm |
| Transmission-side joint diameter | 74.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.95
Important compatibility info
| Weight | 6.32 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 278 mm |
| Thickness | 66 mm |
| Brake Disc Thickness | 22 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.96
Important compatibility info
| Weight | 1.873 kg |
| Placement on Vehicle | Front Axle Left |
| Height | 103 mm |
| Material | Rubber/Metal |
| Outer diameter | 150 mm |
| Paired article numbers | 102047 |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (176428)
- 1x Febi Rolling Bearing, suspension strut support mount (177290)
£56.96
Important compatibility info
| Weight | 0.930 kg |
| Type | Cable Pull, manual transmission |
| Inner length 2 | 885 mm |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 860 mm |
| Outer length 1 | 1180 mm |
| Outer length 2 | 1202 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.96
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023