Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Left |
| Material | Plastic |
| Paired article numbers | 188386 |
| Weight | 0.7 kg |
| Type | Exterior Door Handle |
| Function | Exterior Door Handle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 602 mm |
| Weight | 0.2 kg |
| Housing Diameter | 19 mm |
| Eject Force | 525 N |
| Stroke | 201 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 344.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Seal Material | Rubber/Metal |
| Additional Information | with gasket/seal |
| Weight | 0.95 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Wheel Sided Joint Diameter | 91.2 mm |
| Min. Length | 534 mm |
| External Teeth, Diff.Side | 26 |
| Weight | 6.288 kg |
| External Teeth, Wheel Side | 36 |
| Thread Size | M10x1,5 |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Left |
| Transmission-side joint diameter | 86 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 0.1 kg |
| Number of Connectors / Ports | 13 |
| Combi Switch Function | with klaxon, with light dimmer function, with indicator function, with high beam function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 0.18 kg |
| Fill Medium | Mineral Oil |
| Type | Repair Kit, gear shift lever |
| Function | Repair Kit, gear shift lever |
| for OE number | 000 260 79 98 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Additional Information | with gasket/seal |
| Additional Information 2 | with sensor |
| Weight | 0.323 kg |
| Opening Temperature | 88 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Function | Ring Gear, flywheel |
| Width | 18 mm |
| Outer diameter | 475 mm |
| Inner diameter | 430 mm |
| Number of Teeth | 148 |
| Weight | 3.734 kg |
| Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| External Thread Size | M12 x 1,75, M16 x 2 |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Weight | 2.1 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Max. Length | 427 mm |
| Min. Length | 325 mm |
| Pipe Diameter | 56 mm. 43.5 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Outer diameter | 44 mm |
| Inner diameter | 8.11 mm |
| Function | Slave Cylinder, engine brake |
| Weight | 0.315 kg |
| Length | 172.8 mm |
| Type | Slave Cylinder, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Type | Centre Rod Assembly |
| Cone Size | 17.8 mm |
| Weight | 3.201 kg |
| Function | Centre Rod Assembly |
| Placement on Vehicle | Front Axle, Centre |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Weight | 6.717 kg |
| Paired article numbers | 176966 |
| Steering arm type | Control Arm |
| Material | Steel |
| Placement on Vehicle | Lower Front Axle, Right |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.19
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 175.4 mm |
| Width | 78 mm |
| Additional Information 2 | with fastening material |
| Inspection Tag | ECE R90 Approved |
| Weight | 4.41 kg |
| Thickness/Strength 1 | 22 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.20
Important compatibility info
| Weight | 0.02 kg |
| Length | 64.2 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.20
Important compatibility info
| Weight | 1.29 kg |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.20
Important compatibility info
| Number of Chain Links | 146 |
| Function | Timing Chain |
| Weight | 0.252 kg |
| Type | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
£62.22
Important compatibility info
| Weight | 0.405 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 06L 253 039 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.25
Important compatibility info
| Weight | 4.7 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 42433 |
| Cone Size | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Internal Thread Size | M12 x 1,25 |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.27
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 1.647 kg |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.27
Important compatibility info
| Additional Information | with adjuster |
| Weight | 0.40 kg |
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.28
Important compatibility info
| Weight | 0.2 kg |
| External Thread Size | M18 x 1,5 |
| Placement on Vehicle | after catalytic converter |
| Function | Oxygen Sensor |
| Number of circuits | 4 |
| Cable Length | 1830 mm |
| Spanner Size | 22 |
| Type | Oxygen Sensor |
| Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.28
Important compatibility info
| Weight | 8.190 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 320 mm |
| Thickness | 66.4 mm |
| Brake Disc Thickness | 14 mm |
| Inner diameter | 201 mm |
| Minimum thickness | 12.5 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.28
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Weight | 0.505 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.29
Important compatibility info
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Weight | 0.494 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.29
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 193641 |
| Weight | 3.9 kg |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.30
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
| Cone Size | 18 mm |
| Paired article numbers | 193640 |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 3.9 kg |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.30
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 283 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Weight | 6.0 kg |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.31
Important compatibility info
| Weight | 1.431 kg |
| Outer diameter | 80 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 29 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.31
Important compatibility info
| Additional Information | with fastening/mounting material |
| Weight | 1.36 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 120 mm |
| Outer diameter | 120 mm |
| Thickness | 63 mm |
| Inner diameter | 27 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.31
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 803 mm |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Weight | 4.600 kg |
| Cone Size | 22 mm |
| Pipe Diameter | 38 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.32
Important compatibility info
| Lock System | with double sealing |
| Additional Information | with adjuster |
| Paired article numbers | 179387 |
| Function | Door Lock |
| Placement on Vehicle | Left Front |
| Number of Connectors / Ports | 8 |
| Operating Mode | Electric |
| Extra Description | febi Plus |
| Weight | 0.631 kg |
| Type | Door Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.34
Important compatibility info
| Width of castor bearing surface | 22 mm |
| Weight | 0.638 kg |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.35
Important compatibility info
| Weight | 0.771 kg |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 651 200 12 70 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.35
Important compatibility info
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 0.97 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.36
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 222 W |
| Weight | 1.45 kg |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.37
Important compatibility info
| Placement on Vehicle | Left Rear |
| Number of Connectors / Ports | 4 |
| Weight | 0.159 kg |
| Type | Sensor, headlight levelling |
| Function | Sensor, headlight levelling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.38
Important compatibility info
| Type | Charge Air Hose |
| Inner diameter 1 | 59 mm |
| Outer diameter 2 | 62 mm |
| Outer diameter 1 | 68 mm |
| Additional Information 2 | with clamp |
| Function | Charge Air Hose |
| Inner diameter 2 | 53 mm |
| Weight | 0.386 kg |
| Turbocharger line | Piping to charge air cooler |
| Placement on Vehicle | Charge Air Cooler, Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.39
Important compatibility info
| Function | Roll-off Piston, air suspension bellows |
| Thickness | 103 mm |
| Outer diameter | 210 mm. 222 mm |
| Type | Roll-off Piston, air suspension bellows |
| Colour | Black |
| External Thread Size | M14 x 2 |
| Weight | 3.5 kg |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.40
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Number of Holes | 3 |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Weight | 1.629 kg |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with fastening material, with ball bearing |
| for OE number | 31 30 6 880 438 S1 |
| Internal Thread Size | M10 x 1,5 |
Additional Information
Technical Information
Vehicles can be equipped with different suspension strut mount differing in terms of quantity of fitting holes (3 or 6) and thread (M8 or M10). Please identify the fitted product for comparison. More information in the attached technical bulletin.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (39925)
- 3x Febi Screw (104822)
- 1x Febi Screw (104665)
- 1x Febi Protective Cap/Bellow, shock absorber (46486)
- 1x Febi Nut (34653)
- 1x Febi Rubber Buffer, suspension (39953)
- 1x Febi Nut (104819)
£62.41
Important compatibility info
| Weight | 1.64 kg |
| Placement on Vehicle | Rear |
| Inner diameter | 16 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.42
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 30.2 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Width | 118 mm |
| Length | 249.5 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Weight | 12.456 kg |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.45
Important compatibility info
| Control Type | Rotary Operation |
| Number of Connectors / Ports | 14 |
| Switch | with dimmer switch |
| Combi Switch Function | with hazard warning light function, with fog-lamp function, with rear fog light function, with light dimmer function |
| Switch Lighting | Yellow |
| Weight | 0.099 kg |
| Type | Switch, headlight |
| Function | Switch, headlight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.45
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 7.080 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 276 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Centering Diameter | 96 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.45
Important compatibility info
| Function | Control Valve, camshaft adjustment |
| Number of Connectors / Ports | 2 |
| Weight | 0.147 kg |
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.48
Important compatibility info
| Centering Diameter | 76 mm |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Thickness | 51 mm |
| Brake Disc Thickness | 22 mm |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Minimum thickness | 19 mm |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 120 mm |
| Outer diameter | 300 mm |
| Type | Brake Disc Rotor |
| Weight | 7.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.48
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 53.5 mm |
| Rim Hole Number | 5 -Hole |
| Weight | 6.926 kg |
| Replaces | 23210 |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 19.4 mm |
| Brake Disc Thickness | 22 mm |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.48
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Cone Size 2 | 21.4 mm |
| External Thread Size | M12 x 1,25 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.5 kg |
| Cone Size | 17.4 mm |
| Paired article numbers | 188190 |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Material | Steel |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.50
Important compatibility info
| Weight | 1.35 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.50
Important compatibility info
| Cable Length | 140 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Weight | 0.102 kg |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.50
Important compatibility info
| Thickness/Strength 1 | 30 mm |
| Function | Brake Pad Set, disc brake |
| Brake System | Knorr |
| Wear Warning Contact | excl. wear warning contact |
| Weight | 11.75 kg |
| Placement on Vehicle | Rear Axle, Front Axle |
| Width | 109.5 mm |
| Inspection Tag | ECE R90 Approved |
| Length | 247.5 mm |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.51
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023