Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 98 mm |
| Additional Information | with Split Pin |
| Placement on Vehicle | Front Axle Right |
| Transmission-side joint diameter | 88.9 mm |
| Type | Drive Shaft |
| Thread Size | M24 x 2,0 |
| External Teeth, Wheel Side | 28 |
| Min. Length | 1060 mm |
| External Teeth, Diff.Side | 36 |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Number of Chain Links | 150 |
| Type | Timing Chain Kit |
| Chain Type | Silent Chain, Closed chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (40390)
- 1x Febi Tensioner, timing chain (186275)
- 1x Febi Guide, timing chain (36224)
- 1x Febi Guide, timing chain (36085)
£72.06
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 36 |
| Min. Length | 515 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 123 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Additional Information | with seal rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| for OE number | 81.30550.0082 |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Additional Information 2 | without lid |
| Number of Connectors / Ports | 2 |
| Additional Information | with coolant level sensor |
| Material | PA (polyamide) |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 102986 |
| Steering arm type | Control Arm |
| Outer diameter | 75 mm |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Additional Information | with hydro mount |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 30429 |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Pressure | 7 bar |
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.07
Important compatibility info
| Width | 25.4 mm |
| Number of Teeth | 113 |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Surface | Coated |
| Belts | with rounded tooth profile |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (26050)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (26051)
- 1x Febi Tensioner Pulley, timing belt (33186)
£72.07
Important compatibility info
| Material | Rubber/Metal |
| Thickness | 95 mm |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.07
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| External Thread Size | M12 x 1,25 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.07
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 180308 |
| Brake caliper piston diameter | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.07
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a, R 1234yf |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 607 mm |
| Core Width | 461 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.07
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| External Thread Size | M10 x 1,5 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.07
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Brake Disc Thickness | 23 mm |
| Minimum thickness | 21 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 67.5 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Thickness | 44.8 mm |
| Outer diameter | 315 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.08
Important compatibility info
| Placement on Vehicle | Rear |
| Number of Connectors / Ports | 4 |
| Function | Wiper Motor |
| Voltage | 12 V |
| Type | Wiper Motor |
| for OE number | 5K6 955 711 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.08
Important compatibility info
| Type | Mass Air Flow Sensor |
| Number of Connectors / Ports | 4 |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.08
Important compatibility info
| Placement on Vehicle | Right |
| Length | 187 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Width | 140 mm |
| Height | 128 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.09
Important compatibility info
| Height | 323 mm |
| Outer diameter | 147.2 mm |
| Additional Information 2 | with seal ring |
| Type | Filter, operating hydraulics |
| Function | Filter, operating hydraulics |
| Gasket outer diameter | 186.4 mm |
| Gasket inner diameter | 174.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.11
Important compatibility info
| Type | Camshaft |
| Paired article numbers | 176837 |
| Placement on Vehicle | Exhaust Side |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.12
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 905 mm |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Pipe Diameter | 38 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.13
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 305 mm |
| Thickness | 77.9 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 90 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.15
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Front Axle |
| Function | Brake Disc |
| Surface | Coated |
| Bolt Hole Circle Diameter | 130 mm |
| Minimum thickness | 8 mm |
| Brake Disc Thickness | 9.5 mm |
| Outer diameter | 278 mm |
| Thickness | 83.8 mm |
| Centering Diameter | 39.8 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.17
Important compatibility info
| Function | Bellow, air suspension |
| Additional Information | without piston |
| Type | Bellow, air suspension |
| External Thread Size | M7 x 1, M10 x 1,5 |
| for OE number | 5 0004 2666 |
| Outer diameter | 228 mm |
| Thickness | 325 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.19
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 325 mm |
| Thickness | 52.6 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Replaces | 18558 |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.20
Important compatibility info
| Height | 68 mm |
| Outer diameter | 186 mm |
| Inner diameter | 80 mm |
| Type | Filter, crankcase ventilation |
| Function | Filter, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.21
Important compatibility info
| Inspection Tag | ADR |
| Number of Connectors / Ports | 7 |
| Connecting plug material | Plastic |
| Type | Coiled Cable |
| DIN / ISO | 7638-1 EBS |
| Function | Coiled Cable |
| Working length | 3 m |
| Additional Information 2 | with plug |
| Voltage | 24 V |
| Material | PU (Polyurethane) |
| Version | OE Standard |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.22
Important compatibility info
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Paired article numbers | 108212 |
| Brake Disc Thickness | 36 mm |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle Left |
| Thickness | 66.2 mm |
| Outer diameter | 374 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.27
Important compatibility info
| Thickness | 66.2 mm |
| Brake Disc Thickness | 36 mm |
| Centering Diameter | 75 mm |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Placement on Vehicle | Front Axle Right |
| Outer diameter | 374 mm |
| Paired article numbers | 108211 |
| Rotor Style | Internally Vented |
| Machining | High-carbon |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.27
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023