Proud to be a UK-based company
Contact us
Important compatibility info
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | before soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.17
Important compatibility info
| Length | 110.7 mm |
| Type | Shift Cylinder (manual transmission) |
| Function | Shift Cylinder (manual transmission) |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.17
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 887 mm |
| Additional Information | with nuts |
| Rod/Strut | Guide Rod |
| Cone Size | 32 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.17
Important compatibility info
| External Teeth, Wheel Side | 30 |
| Thread Size | M30x1,5 |
| Min. Length | 720 mm |
| ABS Ring Diameter | 114 mm |
| Wheel Sided Joint Diameter | 98.1 mm |
| Type | Drive Shaft |
| Transmission-side joint diameter | 89.1 mm |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 30 |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.18
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 52 mm |
| Outer diameter | 98 mm |
| Inner diameter | 33 mm |
| Bolt Hole Circle Diameter | 116 mm |
| Outer diameter 1 | 69 mm |
| Outer diameter 2 | 148 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.18
Important compatibility info
| Width | 44 mm |
| Outer diameter | 152 mm. 166 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 6 |
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.18
Important compatibility info
| Width | 25 mm |
| Number of Teeth | 89 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (23043)
- 1x Febi Tensioner Pulley, timing belt (21029)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (21025)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (199440)
£76.18
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 313 mm |
| Thickness | 56.4 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.19
Important compatibility info
| Rod/Strut | Coupling Rod |
| Steering arm type | Trailing Arm |
| Placement on Vehicle | Upper Front Axle, both sides |
| Length | 330 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 36 mm |
| Cone Size | 36 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.19
Important compatibility info
| External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5, M14 x 2 |
| Placement on Vehicle | Rear Axle, non-steered trailing axle |
| Outer diameter | 229 mm. 168 mm |
| Thickness | 630 mm. 185 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston rod, with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.19
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 249 mm |
| Width | 114.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 28 mm |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.22
Important compatibility info
| Extra Description | febi Plus |
| Height | 441 mm |
| Outer diameter | 169 mm |
| Inner diameter | 160 mm |
| Filter type | Filter Insert |
| Type | Air filter kit |
| Function | Air filter kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (38615)
- 1x Febi Air Filter (38614)
£76.23
Important compatibility info
| Length | 276 mm |
| Capacity | 25 l |
| Operating Pressure | 15.5 bar |
| Function | Air Tank, compressed-air system |
| Material | Steel |
| Outer diameter | 495 mm |
| Internal Thread Size | M22 x 1,5 |
| Type | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.26
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 92.5 mm |
| Additional Information | with fastening/mounting material |
| Outer diameter | 152 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 28 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.27
Important compatibility info
| Paired article numbers | 48157 |
| Cone Size | 22 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Steel |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.27
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 30 |
| Min. Length | 486 mm |
| Wheel Sided Joint Diameter | 90 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.28
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 33 |
| External Teeth, Diff.Side | 34 |
| Min. Length | 595 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.28
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.29
Important compatibility info
| Type | Oil Pressure Valve |
| Function | Oil Pressure Valve |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.29
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 176901 |
| Additional Information | with fastening/mounting material, without electric motor |
| Placement on Vehicle | Left Front |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.31
Important compatibility info
| Operating Mode | Electric |
| Function | Window Regulator |
| Additional Information | with fastening/mounting material, without electric motor |
| Placement on Vehicle | Right Front |
| Type | Window Regulator |
| Paired article numbers | 176900 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.31
Important compatibility info
| Outer diameter | 70 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Housing material | Aluminium |
| Operating Mode | Automatic |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.31
Important compatibility info
| Number of grooves | 5 |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.32
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Width | 78 mm |
| Material | Metal |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.32
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 150 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Thickness | 22 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Extra Description | ProKit |
| Number of Holes | 6 |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (08932)
- 6x Febi Screw (02888)
- 1x Febi Assembly Kit, propshaft joint (22118)
£76.33
Important compatibility info
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Piston conrod diameter | 19 mm |
| External Thread Size | M16 x 2 |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 381 mm |
| Min. Length | 331 mm |
| Pipe Diameter | 52 mm |
| Mounting points diameter | 16 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.33
Important compatibility info
| Bolt Hole Circle Diameter | 110 mm |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Number of Holes | 6 |
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws, with washers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (21191)
- 6x Febi Screw (21197)
- 6x Febi Washer (19107)
- 6x Febi Nut (19104)
£76.35
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 60 mm |
| Outer diameter | 81 mm |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Bearing Type | Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.35
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Length | 102 mm |
| Width | 105 mm |
| Thickness | 59 mm |
| Valve type | Solenoid Valve |
| Function | Valve, ABS regulation |
| Type | Valve, ABS regulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.36
Important compatibility info
| Thickness | 295 mm. 143 mm |
| Outer diameter | 205 mm. 259 mm |
| Function | Bellow, air suspension |
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.38
Important compatibility info
| Additional Information | with holder, with gaskets/seals |
| Material | PE (Polyethylene), PP (Polypropylene) |
| Additional Information 2 | with pump, with lid |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Dual Pump |
| Heating / Cooling | with filler neck |
| Type | Washer Fluid Reservoir, window cleaning |
| Function | Washer Fluid Reservoir, window cleaning |
| Extra Description | febi Plus |
| Colour | White |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.38
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 33 |
| External Teeth, Diff.Side | 22 |
| Min. Length | 587 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 91.7 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.38
Important compatibility info
| Placement on Vehicle | before catalytic converter |
| Spanner Size | 22 |
| Cable Length | 300 mm |
| Number of circuits | 6 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.38
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.39
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 374 mm |
| Thickness | 80.8 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.40
Important compatibility info
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182953 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.40
Important compatibility info
| Type | Brake Caliper |
| Paired article numbers | 182952 |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Right |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.40
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Switch, splitter gearbox |
| Function | Switch, splitter gearbox |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.41
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Bolt Hole Circle Diameter | 170 mm |
| Additional Information 2 | with wheel studs |
| Placement on Vehicle | Front Axle |
| Outer diameter | 290 mm |
| Thickness | 84 mm |
| Brake Disc Thickness | 22 mm |
| Brake Disc Type | Solid |
| Minimum thickness | 19 mm |
| Centering Diameter | 125 mm |
| Surface | Coated |
| Function | Brake Disc |
| External Thread Size | M18 x 1,5 |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.42
Important compatibility info
| Inner diameter | 85 mm |
| Function | Suspension, propshaft |
| Hole Spacing | 220 mm |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.42
Important compatibility info
| Length | 341 mm |
| Placement on Vehicle | Lower |
| Type | Air Tank, compressed-air system |
| Operating Pressure | 20 bar |
| Capacity | 5 l |
| Material | Steel |
| Outer diameter | 154 mm |
| Number of Connectors / Ports | 4 |
| Internal Thread Size | M22 x 1,5 |
| Function | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.42
Important compatibility info
| Additional Information 2 | with dryer |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 353 mm |
| Core Width | 644 mm |
| Core Depth | 12 mm |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.42
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Placement on Vehicle | Right |
| External Thread Size | M10 x 1,5 |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.43
Important compatibility info
| Material | Rubber/Metal |
| Number of Holes | 5 |
| Number of Ribs | 5 |
| Colour | Black |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Inner diameter | 30 mm. 8 mm |
| Thickness | 34.5 mm |
| Outer diameter | 168 mm |
| Type | Belt Pulley, crankshaft |
| Hole Spacing | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.45
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 400 mm |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.45
Important compatibility info
| Type | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179242 |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.45
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 106 |
| Timing Chain Size | G67HR |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.46
Important compatibility info
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 34 mm |
| Placement on Vehicle | Front Axle |
| Width | 92 mm |
| Additional Information | with fastening/mounting material |
| Outer diameter | 102 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.46
Important compatibility info
| Internal Thread Size | M8 x 1,25 |
| Material | Cast Steel |
| Inner diameter | 14 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 49244 |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Front Axle Left, Upper |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.47
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Material | Cast Steel |
| Inner diameter | 14 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 49243 |
| Placement on Vehicle | Upper, Front Axle Right |
| External Thread Size | M12 x 1,75 |
| Internal Thread Size | M8 x 1,25 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.47
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023