Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
| Weight | 1.3 kg |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Weight | 8.570 kg |
| Placement on Vehicle | Front Axle |
| Length | 1005 mm |
| Outer diameter | 42 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm. 30 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5, M24 x 1,5 |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Additional Information | with rubber mounts |
| Paired article numbers | 182078 |
| Weight | 4.514 kg |
| Cone Size | 20 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 19993 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Weight | 3.150 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | without holder |
| Additional Information 2 | with rubber mount, without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Weight | 1.520 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 141 mm |
| Thickness | 79 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Material | Rubber/Metal |
| Outer diameter | 167 mm |
| Number of Holes | 3 |
| Additional Information 2 | with bolts/screws |
| Weight | 2.690 kg |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (30097)
£71.07
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Length | 509 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 41 mm |
| Weight | 10.35 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Internal Thread Size | M24 x 1,5 LHT, M24 x 1,5 RHT |
| Weight | 5.5 kg |
| Function | Tie Rod |
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle |
| Type | Tie Rod |
| Pipe Diameter | 30 mm |
| Additional Information 2 | with crown nut |
| Length | 1645 mm |
| External Thread Size | M16 x 1,5 |
| Cone Size | 20 mm |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 30429 |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Weight | 3.88 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 302 mm |
| Thickness | 54 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 96 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Weight | 8.640 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.08
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
| Cable Length | 235 mm |
| Weight | 0.058 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | before soot particulate filter |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.08
Important compatibility info
| Weight | 2.7 kg |
| Brake caliper piston diameter | 41 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Paired article numbers | 181543 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.09
Important compatibility info
| Weight | 5.314 kg |
| Width | 22 mm |
| Outer diameter | 508 mm |
| Inner diameter | 460 mm |
| Number of Teeth | 167 |
| Function | Ring Gear, flywheel |
| Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.13
Important compatibility info
| Function | Brake Caliper |
| Weight | 2.109 kg |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181191 |
| Brake caliper piston diameter | 54 mm |
| Placement on Vehicle | Front Axle Right |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.15
Important compatibility info
| Height | 569 mm |
| Outer diameter | 363 mm |
| Inner diameter | 228 mm |
| Filter type | Filter Insert |
| Weight | 4.5 kg |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.16
Important compatibility info
| Length | 178 mm |
| Additional Information 2 | with anti-squeak plate, with fastening material |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.8 mm |
| Weight | 3.056 kg |
| Width | 67.6 mm |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | with acoustic wear warning |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.17
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 9.36 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 314 mm |
| Thickness | 49.6 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.17
Important compatibility info
| Weight | 0.584 kg |
| Driver Position | for right-hand drive vehicles |
| Inner Length | 922 mm |
| Outer Length | 1092 mm |
| Type | Cable Pull, clutch control |
| Function | Cable Pull, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.19
Important compatibility info
| Additional Information | with fastening/mounting material |
| Core Width | 134 mm |
| Core Depth | 22 mm |
| Weight | 0.418 kg |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 255 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.19
Important compatibility info
| Voltage | 24 V |
| Number of Connectors / Ports | 2 |
| Function | Solenoid Valve |
| Weight | 0.429 kg |
| Type | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.19
Important compatibility info
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 17318 |
| Weight | 4.800 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts, with lock nut |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.21
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper |
| Additional Information | with lock nut, with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 195980 |
| Weight | 0.946 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.21
Important compatibility info
| Weight | 0.817 kg |
| Number of Connectors / Ports | 6 |
| Type | Ignition Coil |
| Function | Ignition Coil |
| for OE number | 55200112 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.21
Important compatibility info
| Weight | 1.16 kg |
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 135 |
| Belts | with rounded tooth profile |
| Width | 19 mm |
| Type | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14608)
- 1x Febi Water Pump, engine cooling (09754)
£71.23
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 18 mm |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 3.864 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 174744 |
| External Thread Size | M12 x 1,25 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.26
Important compatibility info
| Paired article numbers | 182067 |
| Weight | 2.065 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Upper |
| Additional Information 2 | with bearing |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.26
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M20 x 1,5 |
| External Teeth, Wheel Side | 33 |
| Weight | 0.001 kg |
| External Teeth, Diff.Side | 34 |
| Min. Length | 618 mm |
| ABS Ring Diameter | 78 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 82 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.28
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Rear |
| Function | Bush Set, axle beam |
| Material | Rubber |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
| Weight | 1.890 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (22445)
- 2x Febi Screw (22488)
£71.31
Important compatibility info
| Rotor Style | Internally Vented |
| Outer diameter | 320 mm |
| Thickness | 42.7 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle |
| Weight | 7.5 kg |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.35
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left |
| Weight | 1.700 kg |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.35
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 1.647 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.35
Important compatibility info
| Weight | 7.64 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Thickness | 75.5 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Outer diameter | 314 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.35
Important compatibility info
| Weight | 0.020 kg |
| Number of Connectors / Ports | 10 |
| Function | Steering Angle Sensor |
| Voltage | 12 V |
| Type | Steering Angle Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.36
Important compatibility info
| for OE number | 22 11 6 777 382 |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.200 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.36
Important compatibility info
| Width | 36 mm |
| Outer diameter | 72 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 8 |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Weight | 0.715 kg |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.39
Important compatibility info
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with rolling bearing |
| Hole Spacing | 221 mm |
| Weight | 3.400 kg |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Rolling Bearing |
| Inner diameter | 75 mm |
| Length | 260 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.39
Important compatibility info
| Type | Piston, air compressor |
| Outer diameter | 100 mm |
| Function | Piston, air compressor |
| Weight | 0.42 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.41
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.0 kW |
| Function | Starter |
| Weight | 3.46 kg |
| Type | Starter |
| for OE number | 02Z 911 023 FX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.42
Important compatibility info
| Function | Tensioner Pulley, timing belt |
| Outer diameter | 62 mm |
| Width | 34 mm |
| Weight | 0.852 kg |
| Type | Tensioner Pulley, timing belt |
| Replaces | 26718 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.44
Important compatibility info
| Material | Aluminium |
| Inner diameter | 22.2 mm |
| Function | Brake Master Cylinder |
| Additional Information | with gasket/seal |
| Weight | 0.481 kg |
| Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.45
Important compatibility info
| Weight | 1.610 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.47
Important compatibility info
| Weight | 1.26 kg |
| Additional Information 2 | with bolts/screws, with washers |
| Outer diameter | 132 mm |
| Placement on Vehicle | Front |
| Bolt Hole Circle Diameter | 90 mm |
| Inner diameter | 37 mm |
| Thickness | 24 mm |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (01976)
- 3x Febi Screw (03931)
- 3x Febi Screw (09110)
- 1x Febi Assembly Kit, propshaft joint (22117)
£71.47
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Rotor Style | Internally Vented |
| Weight | 17.0 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 324 mm |
| Thickness | 120.5 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27.5 mm |
| Bolt Hole Circle Diameter | 192 mm |
| Centering Diameter | 104 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.47
Important compatibility info
| Placement on Vehicle | after soot particulate filter |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
| Cable Length | 724 mm |
| Type | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| Weight | 0.058 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.47
Important compatibility info
| Weight | 1.64 kg |
| Placement on Vehicle | Left Front |
| Length | 183 mm |
| Width | 121 mm |
| Thickness | 131 mm |
| Paired article numbers | 30628 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Replaces | 27415 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.47
Important compatibility info
| Placement on Vehicle | Lower |
| Length | 709 mm |
| Material | Steel |
| Capacity | 30 l |
| Operating Pressure | 15.5 bar |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Outer diameter | 246 mm |
| Weight | 10.00 kg |
| Number of Connectors / Ports | 4 |
| Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.47
Important compatibility info
| Weight | 1.05 kg |
| Belts | with rounded tooth profile |
| Width | 28 mm |
| Number of Teeth | 132 |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (28588)
- 1x Febi Tensioner Pulley, timing belt (21627)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (15492)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178778)
£71.49
Important compatibility info
| Weight | 8.72 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 336 mm |
| Thickness | 67.1 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.56
Important compatibility info
| Number of Connectors / Ports | 4 |
| Weight | 0.22 kg |
| Type | Ignition Coil |
| Function | Ignition Coil |
| for OE number | 90919-02259 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.58
Important compatibility info
| Bore Diameter | 32 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| for OE number | 0 4128 5355 |
| Weight | 0.826 kg |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.60
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023