Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Steel |
| Outer diameter | 276 mm |
| Length | 411.5 mm |
| Capacity | 20 l |
| Operating Pressure | 15.5 bar |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.43
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Number of Connectors / Ports | 2 |
| Function | Sensor, pneumatic suspension level |
| Type | Sensor, pneumatic suspension level |
| Internal Thread Size | M6 x 1 |
| Replaces | 45397 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.45
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 679 mm |
| Wheel Sided Joint Diameter | 79.4 mm |
| Transmission-side joint diameter | 75.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.45
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1206 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.45
Important compatibility info
| Additional Information 2 | with dryer |
| for OE number | 1 716 734 |
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 471 mm |
| Core Width | 602 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.45
Important compatibility info
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with rolling bearing |
| Hole Spacing | 221 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Rolling Bearing |
| Inner diameter | 75 mm |
| Length | 260 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.47
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 16 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 354 mm |
| Min. Length | 236 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.48
Important compatibility info
| Belts | with rounded tooth profile |
| Width | 28 mm |
| Number of Teeth | 132 |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (28588)
- 1x Febi Tensioner Pulley, timing belt (21627)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (15492)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178778)
£71.49
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 643 mm |
| Core Width | 461 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.49
Important compatibility info
| Wheel Sided Joint Diameter | 80.9 mm |
| ABS Ring Diameter | 81 mm |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Right |
| Min. Length | 610 mm |
| Mounting bores distance | 6 mm |
| Bolt Hole Circle Diameter | 104.1 mm |
| Bore Diameter | 11 mm |
| External Teeth, Wheel Side | 38 |
| Thread Size | M16 x 1,5 |
| Transmission-side joint diameter | 81.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.50
Important compatibility info
| Type | Cylinder Liner, air compressor |
| Function | Cylinder Liner, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.51
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Paired article numbers | 181052 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.52
Important compatibility info
| Length | 423 mm |
| Additional Information | with oil drain plug |
| Material | Aluminium |
| Additional Information 2 | with seal ring |
| Spanner Size | 12 |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| External Thread Size | M10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.53
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Number of Ribs | 5 |
| Inner diameter | 13 mm |
| Parameter | 6PK |
| Outer diameter | 145 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.53
Important compatibility info
| Rotor Style | perforated/vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 360 mm |
| Thickness | 64.5 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.54
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 0.8 kW |
| for OE number | 46548653 |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.54
Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| Fill Medium | Brake Fluid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.55
Important compatibility info
| Width | 36 mm |
| Outer diameter | 72 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 8 |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.55
Important compatibility info
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.56
Important compatibility info
| Number of Connectors / Ports | 4 |
| Type | Ignition Coil |
| Function | Ignition Coil |
| for OE number | 90919-02259 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.58
Important compatibility info
| Placement on Vehicle | Left, Right |
| Colour | Purple |
| Bearing/Mounting Type | Vacuum controlled hydro mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.61
Important compatibility info
| Width | 39.5 mm |
| Number of Ribs | 7 |
| Tightening Torque | 85 Nm |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
| Outer diameter | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.62
Important compatibility info
| for OE number | 22 11 6 883 514 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.64
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 296 mm |
| Thickness | 49.2 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.65
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 31 |
| Min. Length | 611 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 84 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.65
Important compatibility info
| Width | 110 mm |
| Material | Plastic |
| Mounting points diameter | 8 mm |
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Outer diameter | 60 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Width of castor bearing surface | 34 mm |
| Inner diameter | 8.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.66
Important compatibility info
| Width | 26 mm |
| Material | Metal |
| Outer diameter | 68 mm |
| Function | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 26 mm |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.66
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 126 |
| Timing Chain Size | D67ZN |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.69
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 41809 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Replaces | 41727 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.70
Important compatibility info
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear |
| Max. Length | 224 mm |
| Min. Length | 208 mm |
| Pipe Diameter | 40 mm |
| Mounting points diameter | 12 mm. 18 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.70
Important compatibility info
| Length | 136 mm |
| Additional Information 2 | with switch |
| Function | Gear Lever Knob |
| Type | Gear Lever Knob |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.73
Important compatibility info
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 33 |
| Min. Length | 576 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Transmission-side joint diameter | 94.0 mm |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.74
Important compatibility info
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.75
Important compatibility info
| Bolt Hole Circle Diameter | 110 mm |
| Outer diameter | 160 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.77
Important compatibility info
| for OE number | 5 0429 4640 |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.78
Important compatibility info
| Eject Force | 380 N |
| Function | Gas Spring, boot/cargo area |
| Mounting points diameter | 17.8 mm |
| Stroke | 172 mm |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Housing length | 254.5 mm |
| Placement on Vehicle | both sides |
| Length | 454 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.78
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Additional Information | with rubber mounts |
| Material | Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 196391 |
| Cone Size | 20.7 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 25.5 mm |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.79
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information | with rubber mounts |
| Material | Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 280636, 196390 |
| Cone Size | 20.7 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 25.5 mm |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.79
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 98 mm |
| Paired article numbers | 44060 |
| Surface | Coated |
| Number of mounting bores | 2 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | perforated/vented |
| Outer diameter | 330 mm |
| Thickness | 75 mm |
| Brake Disc Thickness | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.80
Important compatibility info
| Bore Diameter | 8.5 mm |
| External Teeth, Wheel Side | 27 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 96.5 mm |
| Wheel Sided Joint Diameter | 83.0 mm |
| ABS Ring Diameter | 83 mm |
| Min. Length | 665 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| Bolt Hole Circle Diameter | 79.9 mm |
| Number of mounting bores | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.80
Important compatibility info
| Additional Information | with rubber mounts, with lock nut |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 23181 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.81
Important compatibility info
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Type | Timing Belt Kit |
| Width | 20 mm |
| Number of Teeth | 163 |
| Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (47885)
- 1x Febi Tensioner Pulley, timing belt (45795)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (176535)
- 1x Febi Bolt, tensioner pulley (184719)
£71.81
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.83
Important compatibility info
| Number of Connectors / Ports | 3 |
| Colour Coding | Red, Black, White |
| Length | 156 mm |
| Width | 71 mm. 49 mm |
| Inner diameter | 4 mm |
| Function | Gear Lever Knob |
| Type | Gear Lever Knob |
| External Thread Size | M42 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.84
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 302 mm |
| Thickness | 70 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 24.5 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 90 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.84
Important compatibility info
| Placement on Vehicle | Front Axle |
| Thickness | 54 mm |
| Outer diameter | 304 mm |
| Minimum thickness | 26 mm |
| Centering Diameter | 71.1 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 108 mm |
| Brake Disc Thickness | 28 mm |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.84
Important compatibility info
| Additional Information | with gasket/seal |
| Length | 370 mm |
| Height | 188 mm |
| Width | 42 mm |
| Number of Connectors / Ports | 2 |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 188 mm |
| Core Width | 370 mm |
| Core Depth | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.85
Important compatibility info
| Placement on Vehicle | Left |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.85
Important compatibility info
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| External Thread Size | M6 x 1 |
| Length | 457 mm |
| Additional Information | with oil drain plug |
| Additional Information 2 | with oil sump gasket |
| Spanner Size | 22 |
| Additionally Required Parts | 11137603830 (2x), 11137603833 (20x) |
Additional Information
Technical Information
New fastening bolts, oil pan gasket and an appropriate sealing compound should be used in case of replacement.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.85
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| External Thread Size | M10 x 1,5 |
| for OE number | 22 11 6 861 406 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.86
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023