Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.050 kg |
| Spanner Size | 17 |
| Cable Length | 385 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.41
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 1.350 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| for OE number | 22 11 6 859 408 |
| External Thread Size | M10 x 1,5 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.42
Important compatibility info
| Weight | 2.250 kg |
| Gasket outer diameter | 71 mm |
| Gasket inner diameter | 64 mm |
| Filter type | Spin-on Filter |
| Function | Hydraulic Filter, automatic transmission |
| Type | Hydraulic Filter, automatic transmission |
| Outer diameter | 119 mm |
| Height | 298 mm |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.43
Important compatibility info
| Weight | 0.159 kg |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| for OE number | 08 36 584 |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.43
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 2 |
| Weight | 0.57 kg |
| for OE number | 009 542 16 18 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 455 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.43
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 1.040 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.44
Important compatibility info
| Weight | 1.926 kg |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 385 mm |
| Core Width | 381 mm |
| Core Depth | 16 mm |
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.44
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 134 mm |
| Thickness | 32 mm |
| Inner diameter | 37 mm |
| Bolt Hole Circle Diameter | 70 mm |
| Surface | Painted |
| Function | Vibration Damper, propshaft |
| Weight | 1.58 kg |
| Type | Vibration Damper, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.44
Important compatibility info
| Function | Cable Pull, manual transmission |
| Weight | 1.106 kg |
| Inner length 2 | 857 mm |
| Outer length 1 | 1235 mm |
| Inner length 1 | 940 mm |
| Type | Cable Pull, manual transmission |
| Outer length 2 | 1132 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.45
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 1.660 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.45
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 30.5 mm |
| for OE number | 31170-RNA-A02 |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 1.144 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.52
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Weight | 3.36 kg |
| Paired article numbers | 43040 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.53
Important compatibility info
| Placement on Vehicle | both sides |
| Colour | Purple |
| Bearing/Mounting Type | Vacuum controlled hydro mount |
| Function | Mounting, engine |
| Weight | 1.29 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.53
Important compatibility info
| Additional Information | with gasket/seal |
| Type | EGR Valve |
| Function | EGR Valve |
| Weight | 0.53 kg |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.54
Important compatibility info
| Number of Chain Links | 170 |
| Function | Timing Chain |
| Placement on Vehicle | Upper |
| Chain Type | Silent Chain, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.6 kg |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.55
Important compatibility info
| Weight | 1.03 kg |
| Placement on Vehicle | Rear |
| Number of Connectors / Ports | 3 |
| Function | Wiper Motor |
| Voltage | 12 V |
| External Thread Size | M8 x 1,25 |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.55
Important compatibility info
| Weight | 8.9 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.56
Important compatibility info
| Weight | 0.837 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 186762, 186942, 186781 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.56
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | slotted/perforated, internally vented |
| Weight | 12.45 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 350 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.56
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 83 mm |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Weight | 7.668 kg |
| External Teeth, Diff.Side | 26 |
| Transmission-side joint diameter | 78.8 mm |
| Min. Length | 915 mm |
| External Teeth, Wheel Side | 23 |
| Thread Size | M20x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.58
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023