Important compatibility info
Housing Type | with housing |
Type | Mass Air Flow Sensor |
Resistor Type | Hot-wire Sensor |
Function | Mass Air Flow Sensor |
Weight | 0.18 kg |
Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Placement on Vehicle | Right |
External Thread Size | M10 x 1,5 |
Weight | 0.620 kg |
for OE number | 22 11 6 856 406 |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information | with Split Pin |
Additional Information 2 | with nut |
Thread Size | M24x2,0 |
External Teeth, Wheel Side | 28 |
Weight | 9.354 kg |
External Teeth, Diff.Side | 36 |
Min. Length | 797 mm |
ABS Ring Diameter | 105 mm |
Wheel Sided Joint Diameter | 100 mm |
Transmission-side joint diameter | 92.2 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Inner diameter | 36.6 mm |
Weight | 5.930 kg |
Outer diameter | 87.5 mm |
Function | Wheel Bearing Kit |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 78 mm |
Additional Information | with fastening/mounting material |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Bearing Type | Tapered Roller Bearing |
Outer diameter 1 | 65 mm |
Outer diameter 2 | 210 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.597 kg |
Material | Aluminium |
Inner diameter | 23.81 mm |
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | Left |
Weight | 0.600 kg |
External Thread Size | M10 x 1,5 |
Type | Mounting, engine |
for OE number | 22 11 6 856 405 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Paired article numbers | 180772 |
Placement on Vehicle | Left |
Weight | 2.12 kg |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.826 kg |
Extra Description | Basic Short Kit |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 138 |
Function | Timing Chain Kit |
Type | Timing Chain Kit |
Timing Chain Size | G53HR |
Replaces | 38195 |
Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Guide, timing chain (29901)
- 1x Febi Guide, timing chain (29902)
- 1x Febi Guide, timing chain (29903)
- 1x Febi Tensioner, timing chain (47638)
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | Left |
Weight | 0.84 kg |
Type | Mounting, engine |
for OE number | 22 11 6 862 549 |
External Thread Size | M8 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Weight | 1.050 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.05 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter | 145 mm. 49 mm |
Number of Holes | 6 |
Number of Teeth | 30 |
Type | Wheel Hub |
Function | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Weight | 1.600 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 9 |
Extra Description | febi Plus |
Weight | 0.056 kg |
for OE number | 55271957 |
Type | Control Unit, glow time |
Function | Control Unit, glow time |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Filter |
Height | 139 mm |
Outer diameter | 100 mm |
Filter type | Centrifuge |
Type | Oil Filter |
Weight | 0.245 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 6 -Hole |
Bolt Hole Circle Diameter | 170 mm |
Weight | 15.4 kg |
Additional Information 2 | with wheel studs |
Placement on Vehicle | Front Axle |
Outer diameter | 290 mm |
Thickness | 84 mm |
Brake Disc Thickness | 22 mm |
Brake Disc Type | Solid |
Minimum thickness | 19 mm |
Centering Diameter | 125 mm |
Surface | Coated |
Function | Brake Disc |
External Thread Size | M18 x 1,5 |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Steering arm type | Triangular Control Arm (CV) |
Paired article numbers | 37611 |
Placement on Vehicle | Front Axle Left, Lower |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
Thread Size | M27x1,5 |
Paired article numbers | 182023 |
External Teeth, Wheel Side | 30 |
Weight | 7.568 kg |
External Teeth, Diff.Side | 27 |
Min. Length | 589 mm |
Wheel Sided Joint Diameter | 98.1 mm |
Transmission-side joint diameter | 81.6 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.157 kg |
Number of Connectors / Ports | 2. 4 |
Type | Resistor, interior blower |
Function | Resistor, interior blower |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Expansion Tank, coolant |
Fill quantity | 9.5 l |
Extra Description | ProKit |
Weight | 2.293 kg |
Type | Expansion Tank, coolant |
Additional Information | with lids, with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Expansion Tank, coolant (35035)
- 1x Febi Sensor, coolant level (35357)
- 1x Febi Cap, coolant tank (11562)
- 1x Febi Cap, coolant tank (45932)
Important compatibility info
Extra Description | febi Plus |
Weight | 0.317 kg |
Type | Pipe, EGR valve |
Function | Pipe, EGR valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Silicone |
Additional Information 2 | with clamp |
Weight | 0.251 kg |
Type | Charge Air Hose |
Wall Thickness | 5 mm |
Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 187797 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Material | Sheet Steel |
Weight | 3.047 kg |
Cone Size | 20 mm |
Cone Size 1 | 15.7 mm |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 7.550 kg |
Paired article numbers | 174692 |
Steering arm type | Control Arm |
Inner diameter | 16 mm |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 1.021 kg |
Steering arm type | Control Arm |
Material | Aluminium |
Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (45377)
- 1x Febi Nut, stabiliser bar (22264)
Important compatibility info
Weight | 4.472 kg |
Extra Description | febi Plus |
Height | 415 mm. 383 mm |
Outer diameter | 333 mm |
Inner diameter | 200 mm |
Filter type | Filter Insert |
Outer diameter 1 | 193 mm |
Type | Air filter kit |
Function | Air filter kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (47531)
- 1x Febi Air Filter (105983)
Important compatibility info
Material | Sheet Steel |
Steering arm type | Triangular Control Arm (CV) |
Paired article numbers | 37612 |
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Surface | Coated |
Function | Timing Belt Kit |
Type | Timing Belt Kit |
Number of Teeth | 122 |
Width | 26.5 mm |
Weight | 0.517 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (14370)
- 1x Febi Tensioner Pulley, timing belt (11559)
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Mounting points diameter | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
Length | 509 mm |
Steering arm type | Trailing Arm |
Rod/Strut | Guide Rod |
Pipe Diameter | 41 mm |
Weight | 10.35 kg |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 6 |
Function | V-Ribbed Belt Set |
Type | V-Ribbed Belt Set |
Weight | 0.998 kg |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28940)
- 1x Febi Belt Tensioner, v-ribbed belt (34805)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (32820)
Important compatibility info
Function | Drive Shaft |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Weight | 8.358 kg |
External Teeth, Diff.Side | 39 |
Min. Length | 692 mm |
Wheel Sided Joint Diameter | 98 mm |
Transmission-side joint diameter | 89 mm |
Paired article numbers | 182937 |
External Teeth, Wheel Side | 28 |
Thread Size | M24x1,5 |
Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Type | Window Regulator |
Weight | 1.0 kg |
Paired article numbers | 176901 |
Additional Information | with fastening/mounting material, without electric motor |
Placement on Vehicle | Left Front |
Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.9 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 630 mm |
Min. Length | 399 mm |
Stroke | 231 mm |
Pipe Diameter | 32 mm. 28 mm |
Piston conrod diameter | 15 mm |
Function | Shock Absorber, steering |
Type | Shock Absorber, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.94 kg |
Number of Connectors / Ports | 2 |
Colour Coding | Green |
Type | EGR Valve |
Function | EGR Valve |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 9.66 kg |
Length | 915 mm |
Material | Steel |
Function | Centre Rod Assembly |
Pipe Diameter | 40 mm. 50 mm |
Cone Size | 30 mm |
Thickness | 118 mm |
Spanner Size | 36 |
Rod/Strut | Push Rod |
Colour | Black |
Driver Position | for right-hand drive vehicles |
Thread Length | 27.2 mm. 80 mm |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.35 kg |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 32072 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Function | Window Regulator |
Additional Information | with fastening/mounting material, without electric motor |
Placement on Vehicle | Right Front |
Type | Window Regulator |
Weight | 1.0 kg |
Paired article numbers | 176900 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.635 kg |
Cone Size | 24 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 174785 |
Steering arm type | Control Arm |
Additional Information 2 | with bearing, with ball joint |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Right, Front |
Material | Steel |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Tensioner, timing chain |
Length | 91 mm |
Function | Tensioner, timing chain |
Outer diameter | 27 mm |
Operating Mode | Hydraulic |
Spanner Size | 17 |
Weight | 0.081 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.01 kg |
Additional Information | with gaskets/seals |
Number of Connectors / Ports | 2 |
Type | EGR Valve |
Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 22 mm |
Additional Information | with lock nut, with rubber mounts |
Paired article numbers | 181051 |
Weight | 7.051 kg |
External Thread Size | M16 x 1,5 |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with spacer plate |
Weight | 1.990 kg |
Type | Cylinder Head, air compressor |
Function | Cylinder Head, air compressor |
Internal Thread Size | M22 x 1,5, M26 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Cylinder Head Gasket, air compressor (35700)
- 1x Febi Seal, air compressor (35703)
- 1x Febi Cylinder Head, air compressor (35764)
- 1x Febi Valve Plate, air compressor (35742)
- 1x Febi Screw (35765)
- 1x Febi Seal Ring (30074)
Important compatibility info
Mounting bores distance | 78 mm |
Internal Thread Size | M16 x 1,5 |
Weight | 0.4 kg |
Function | Solenoid Valve, shift cylinder |
Type | Solenoid Valve, shift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Fan, engine cooling |
Number of Wings | 11 |
Rated Power | 200 W |
Operating Mode | Electric |
Outer diameter | 280 mm |
Width | 70 mm |
Placement on Vehicle | Right |
Weight | 1.65 kg |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Weight | 2.0 kg |
Type | Gasket Set, wheel hub |
Function | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (24759)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Gasket, external planetary gearbox (03429)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Shaft Seal, drive shaft (38541)
- 1x Febi Shaft Seal, wheel hub (24758)
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Rated Power | 1.1 kW |
Weight | 3.4 kg |
for OE number | 036 911 023 SX |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Weight | 1.2 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 225 mm |
Min. Length | 199 mm |
Pipe Diameter | 54 mm. 42 mm |
Mounting points diameter | 14 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4. 5 |
Weight | 0.122 kg |
Type | Control Unit, glow time |
Extra Description | febi Plus |
Function | Control Unit, glow time |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left, Rear |
Material | Aluminium |
Inner diameter | 14 mm |
Steering arm type | Control Arm |
Paired article numbers | 43762 |
Weight | 2.116 kg |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut, with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Cone Size | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (43759)
- 1x Febi Nut (39976)
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Weight | 7.550 kg |
Paired article numbers | 174693 |
Steering arm type | Control Arm |
Inner diameter | 16 mm |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.16 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 60 mm |
Outer diameter | 74 mm |
Bolt Hole Circle Diameter | 108 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with integrated ABS sensor |
Outer diameter 2 | 152 mm |
Outer diameter 1 | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023