Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Ignition Coil |
| Function | Ignition Coil |
| Weight | 0.210 kg |
| Number of Connectors / Ports | 4 |
| for OE number | 27301-04110 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.88
Important compatibility info
| Length | 54 mm. 43 mm |
| Thickness | 45 mm |
| Number of Connectors / Ports | 3 |
| Weight | 0.50 kg |
| Operating Mode | Pneumatic |
| Type | Actuator, seat adjustment |
| Function | Actuator, seat adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.89
Important compatibility info
| Weight | 0.869 kg |
| Placement on Vehicle | both sides |
| Length | 561 mm |
| Housing Diameter | 34 mm |
| Eject Force | 700 N |
| Stroke | 168 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Mounting points diameter | 18 mm |
| Housing length | 307 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.91
Important compatibility info
| Length | 516 mm. 1318 mm |
| Material | Steel |
| Spanner Size | 19 |
| Colour | Black |
| Rod/Strut | Push Rod |
| External Thread Size | M12 x 1,5 |
| Placement on Vehicle | Front Axle, Centre, Outer |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Weight | 4.0 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.93
Important compatibility info
| Function | Shock Absorber |
| Piston conrod diameter | 15 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 625 mm |
| Min. Length | 365 mm |
| Pipe Diameter | 63.4 mm. 54 mm |
| Replaces | 20093 |
| Weight | 4.0 kg |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
| Type | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.93
Important compatibility info
| Weight | 1.410 kg |
| Length | 275 mm |
| Outer diameter | 133 mm. 129 mm |
| Function | Corrugated Pipe, exhaust system |
| Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.96
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Placement on Vehicle | Right |
| Weight | 1.100 kg |
| External Thread Size | M10 x 1,5 |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.98
Important compatibility info
| Width | 33 mm |
| Outer diameter | 67 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
| Weight | 0.290 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.98
Important compatibility info
| Function | Filter, cabin air |
| Width | 361 mm |
| Filter type | Activated Carbon Filter, High efficiency air filter (HEPA) |
| Weight | 0.69 kg |
| Type | Filter, cabin air |
| Contact surface | Foam Padding |
| Height | 20 mm |
| Length | 699 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.98
Important compatibility info
| Weight | 1.22 kg |
| Additional Information | with gasket/seal, with oil filter, with oil cooler |
| Height | 126 mm |
| Length | 366 mm |
| Width | 131 mm |
| Extra Description | febi Plus |
| Function | Housing, oil filter |
| Type | Housing, oil filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.98
Important compatibility info
| Placement on Vehicle | Front |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 106 mm |
| Function | Joint, propshaft |
| Weight | 0.74 kg |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.98
Important compatibility info
| Material | Aluminium |
| Function | Brake Master Cylinder |
| Weight | 0.582 kg |
| Type | Brake Master Cylinder |
| Piston Diameter | 22.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.98
Important compatibility info
| Weight | 7.110 kg |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 55 mm |
| Outer diameter | 96 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Inner diameter | 37 mm |
| Bolt Hole Circle Diameter | 160 mm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.98
Important compatibility info
| Additional Information 2 | with seal ring, with screw |
| Inner diameter | 30 mm |
| Number of Ribs | 6 |
| Weight | 2.372 kg |
| Parameter | 7PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 157 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (107196)
- 1x Febi Pulley Bolt (177692)
£75.98
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
| Voltage | 12 V |
| Weight | 0.29 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.99
Important compatibility info
| Operating Pressure | 14.5 bar |
| Function | Air Tank, compressed-air system |
| Length | 568 mm |
| Weight | 9.8 kg |
| Outer diameter | 276 mm |
| Capacity | 30 l |
| Material | Steel |
| Type | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.99
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 192 W |
| Weight | 1.4 kg |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.99
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Outer diameter | 322 mm |
| Thickness | 134 mm |
| Brake Disc Thickness | 30 mm |
| Brake Disc Type | Internally Vented |
| Number of Holes | 8 |
| Minimum thickness | 27.75 mm |
| Bolt Hole Circle Diameter | 275 mm |
| Surface | Coated |
| Function | Brake Disc |
| Weight | 17.8 kg |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.00
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 26 |
| Weight | 6.002 kg |
| External Teeth, Diff.Side | 23 |
| Min. Length | 661 mm |
| Wheel Sided Joint Diameter | 84.5 mm |
| Transmission-side joint diameter | 86 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.00
Important compatibility info
| Width | 24 mm |
| Number of Teeth | 83 |
| Surface | Coated |
| Function | Timing Belt Kit |
| Weight | 0.5 kg |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (40563)
- 1x Febi Tensioner Pulley, timing belt (30221)
£76.01
Important compatibility info
| Weight | 1.7 kg |
| Length | 227 mm |
| Material | Plastic |
| Outer diameter | 147 mm |
| Colour | White |
| Number of Connectors / Ports | 2 |
| Rated Power | 195 W |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.01
Important compatibility info
| Weight | 0.54 kg |
| Length | 156 mm |
| Width | 71 mm. 57 mm |
| Inner diameter | 4 mm |
| Number of Connectors / Ports | 4 |
| Colour Coding | Yellow, Red, Black, White |
| Function | Gear Lever Knob |
| Type | Gear Lever Knob |
| External Thread Size | M42 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Function | Gasket Set, automatic transmission |
| Weight | 0.541 kg |
| Extra Description | febi Plus |
| Type | Gasket Set, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Type | Gasket Set, oil cooler |
| Material | Rubber/Metal, NBR (nitrile butadiene rubber) |
| Weight | 0.098 kg |
| Function | Gasket Set, oil cooler |
| for OE number | 2 096 561 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, oil cooler (107788)
- 2x Febi Seal Ring, oil cooler (lubrication) (45524)
- 2x Febi Seal Ring, oil cooler (lubrication) (45523)
£76.02
Important compatibility info
| Weight | 0.157 kg |
| Number of Connectors / Ports | 2. 4 |
| Type | Resistor, interior blower |
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Spanner Size | 22 |
| Voltage | 12 V |
| Weight | 0.082 kg |
| Number of Connectors / Ports | 4 |
| Function | Oxygen Sensor |
| Cable Length | 450 mm |
| External Thread Size | M18 x 1,5 |
| Number of circuits | 3 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 37612 |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Function | Tilt Pump, driver cab |
| Weight | 2.367 kg |
| Suction side external thread size | M12 x 1,5 |
| Pressure side external thread size | M12 x 1,5 |
| Number of Connectors / Ports | 2 |
| Operating Mode | Manual |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 3.210 kg |
| Placement on Vehicle | Front Axle Right, Rear, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 38057 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Weight | 3.16 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 60 mm |
| Outer diameter | 74 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with integrated ABS sensor |
| Outer diameter 2 | 152 mm |
| Outer diameter 1 | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Weight | 0.94 kg |
| Number of Connectors / Ports | 2 |
| Colour Coding | Green |
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Weight | 4.65 kg |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Piston conrod diameter | 19 mm |
| External Thread Size | M16 x 2 |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 381 mm |
| Min. Length | 331 mm |
| Pipe Diameter | 52 mm |
| Mounting points diameter | 16 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Length | 633 mm |
| Height | 79 mm |
| Width | 570 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Weight | 3.1 kg |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Weight | 0.22 kg |
| Placement on Vehicle | Rear Axle Left, Front Axle Left, Front Axle Right, Rear Axle Right |
| Material | FPM (fluoride rubber) |
| Outer diameter | 165 mm |
| Thickness | 13.5 mm |
| Inner diameter | 137 mm |
| Function | Shaft Seal, wheel bearing |
| Type | Shaft Seal, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Extra Description | febi Plus |
| Weight | 0.317 kg |
| Type | Pipe, EGR valve |
| Function | Pipe, EGR valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 110 |
| Weight | 1.444 kg |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | D67HR |
| Additional Information | with chain tensioner, with slide rails |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Guide, timing chain (19079)
- 1x Febi Guide, timing chain (19078)
- 1x Febi Guide, timing chain (19077)
- 1x Febi Timing Chain (25354)
- 1x Febi Tensioner, timing chain (17773)
£76.02
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Bearing Type | Angular Ball Bearing |
| Outer diameter | 70 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Weight | 3.491 kg |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Inner diameter | 30 mm |
| Width | 64 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Number of Ribs | 6 |
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Weight | 0.998 kg |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28940)
- 1x Febi Belt Tensioner, v-ribbed belt (34805)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (32820)
£76.02
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Bolt Hole Circle Diameter | 170 mm |
| Weight | 15.4 kg |
| Additional Information 2 | with wheel studs |
| Placement on Vehicle | Front Axle |
| Outer diameter | 290 mm |
| Thickness | 84 mm |
| Brake Disc Thickness | 22 mm |
| Brake Disc Type | Solid |
| Minimum thickness | 19 mm |
| Centering Diameter | 125 mm |
| Surface | Coated |
| Function | Brake Disc |
| External Thread Size | M18 x 1,5 |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Core Length | 164 mm |
| Core Width | 179 mm |
| Weight | 0.49 kg |
| Additional Information | with gasket/seal |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Depth | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Length | 103.45 mm |
| Operating pressure to | 10 bar |
| Number of Connectors / Ports | 2 |
| Width | 42.45 mm |
| Voltage | 24 V |
| Weight | 0.429 kg |
| Function | Solenoid Valve |
| Valve type | Solenoid Valve |
| Internal Thread Size | M12 x 1,5 |
| Type | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 105.1 mm |
| Transmission-side joint diameter | 107.5 mm |
| Min. Length | 618 mm |
| External Teeth, Diff.Side | 26 |
| Weight | 9.014 kg |
| External Teeth, Wheel Side | 38 |
| Thread Size | M20x1,5 |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Extra Description | ProKit |
| for OE number | 970 330 00 03 |
| Cone Size | 26 mm |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 40 mm |
| Outer diameter | 40 mm |
| Length | 1640 mm |
| Placement on Vehicle | Front Axle |
| Weight | 8.057 kg |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 3.210 kg |
| Placement on Vehicle | Front Axle Left, Rear, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 38058 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 37611 |
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Weight | 2.68 kg |
| Paired article numbers | 174782 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Rear Axle Left, Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Weight | 0.9 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 630 mm |
| Min. Length | 399 mm |
| Stroke | 231 mm |
| Pipe Diameter | 32 mm. 28 mm |
| Piston conrod diameter | 15 mm |
| Function | Shock Absorber, steering |
| Type | Shock Absorber, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Weight | 7.11 kg |
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (30443)
- 1x Febi Oil Filter (45320)
- 1x Febi Fuel filter (31397)
- 1x Febi Air Dryer Cartridge, compressed-air system (34322)
- 1x Febi Seal Ring (40687)
- 1x Febi Filter, cabin air (18541)
£76.02
Important compatibility info
| Weight | 2.033 kg |
| Outer diameter | 139 mm. 143 mm |
| Thickness | 44.5 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 8 |
| Parameter | 4PK + 5PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Weight | 2.072 kg |
| Placement on Vehicle | Lower, Front Axle Left, Front, Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023