Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Chain Links | 94 |
| Function | Chain Kit, oil pump drive |
| Weight | 0.666 kg |
| Type | Chain Kit, oil pump drive |
| Chain Type | Silent Chain, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (45053)
- 1x Febi Chain Tensioner, oil pump drive (177614)
- 1x Febi Guide, timing chain (177314)
- 1x Febi Guide, timing chain (179206)
£76.02
Important compatibility info
| Weight | 3.4 kg |
| Placement on Vehicle | Rear, both sides |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
| Max. Length | 297 mm |
| Min. Length | 212 mm |
| Pipe Diameter | 45 mm |
| Mounting points diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Min. Length | 973 mm |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| External Teeth, Wheel Side | 27 |
| Weight | 9.376 kg |
| External Teeth, Diff.Side | 30 |
| Placement on Vehicle | Front Axle Right |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 81.5 mm |
| Paired article numbers | 184556 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Weight | 1.235 kg |
| Material | Rubber/Metal |
| Outer diameter | 150 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Thickness | 22 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Extra Description | ProKit |
| Number of Holes | 6 |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (08932)
- 6x Febi Screw (02888)
- 1x Febi Assembly Kit, propshaft joint (22118)
£76.02
Important compatibility info
| Mounting bores distance | 78 mm |
| Internal Thread Size | M16 x 1,5 |
| Weight | 0.4 kg |
| Function | Solenoid Valve, shift cylinder |
| Type | Solenoid Valve, shift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Width | 31.5 mm |
| Weight | 1.07 kg |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Material | Plastic |
| Width of castor bearing surface | 25.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Weight | 4.0 kg |
| Rod/Strut | Coupling Rod |
| Steering arm type | Trailing Arm |
| Placement on Vehicle | Upper Front Axle, both sides |
| Length | 330 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 36 mm |
| Cone Size | 36 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Weight | 0.494 kg |
| Material | Aluminium |
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Piston Diameter | 25.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Weight | 7.842 kg |
| Width | 200 mm |
| Material | Steel |
| Colour | Black |
| Surface | Zinc-coated |
| Brake Pad | without lining |
| Inner Bow Length | 440 mm |
| Function | Brake Shoe |
| Additional Information | with fastening/mounting material |
| Type | Brake Shoe |
| for OE number | 05.091.27.54.2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Brake Shoe (07247)
- 1x Febi Brake Shoe Sleeve (07266)
- 1x Febi Split Pin (07243)
- 2x Febi Circlip, brake anchor pin (07275)
£76.02
Important compatibility info
| Type | Centre Rod Assembly |
| Pipe Diameter | 40 mm |
| Rod/Strut | Coupling Rod |
| Internal Thread Size | M30 x 1,5 |
| Function | Centre Rod Assembly |
| Additional Information | with lock nut |
| External Thread Size | M24 x 1,5 |
| Length | 935 mm |
| Extra Description | ProKit |
| Cone Size | 30 mm |
| Weight | 7.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Surface | Coated |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Number of Teeth | 122 |
| Width | 26.5 mm |
| Weight | 0.517 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (14370)
- 1x Febi Tensioner Pulley, timing belt (11559)
£76.02
Important compatibility info
| Weight | 2.35 kg |
| Max. Length | 260 mm |
| Min. Length | 218 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting points diameter | 12 mm |
| Pipe Diameter | 40 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Weight | 5.99 kg |
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (28245)
- 1x Febi Oil Filter (24665)
- 1x Febi Fuel filter (24663)
£76.02
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Weight | 1.362 kg |
| for OE number | 2 225 899 |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 830 mm |
| Inner length 2 | 865 mm |
| Outer length 1 | 1201 mm |
| Outer length 2 | 1227 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Type | Tensioner, timing chain |
| Length | 91 mm |
| Function | Tensioner, timing chain |
| Outer diameter | 27 mm |
| Operating Mode | Hydraulic |
| Spanner Size | 17 |
| Weight | 0.081 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Width of castor bearing surface | 28 mm |
| Material | Aluminium |
| Operating Mode | Automatic |
| Function | Belt Tensioner, v-ribbed belt |
| Weight | 0.907 kg |
| Outer diameter | 60 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Paired article numbers | 36334 |
| Placement on Vehicle | Upper Front Axle, Right |
| Material | Aluminium |
| Outer diameter | 20 mm |
| Inner diameter | 11 mm |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 1.05 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.03
Important compatibility info
| Rim Hole Number | 8 -Hole |
| Weight | 7.435 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 345 mm |
| Thickness | 76.5 mm |
| Brake Disc Thickness | 18 mm |
| Minimum thickness | 16.5 mm |
| Bolt Hole Circle Diameter | 150 mm |
| Centering Diameter | 112 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Inner diameter | 240 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.03
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 1.204 kg |
| Paired article numbers | 182030 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with rubber mount |
| Material | Aluminium |
| Placement on Vehicle | Upper, Rear Axle Right, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.03
Important compatibility info
| Core Depth | 16 mm |
| Function | Condenser, air conditioning |
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Additional Information 2 | with dryer |
| Core Length | 700 mm |
| Weight | 2.603 kg |
| Core Width | 381 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.03
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 7.430 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 282 mm |
| Thickness | 48.5 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.03
Important compatibility info
| Weight | 5.230 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
| Steering arm type | Triangular Control Arm (CV) |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 179405 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.03
Important compatibility info
| Weight | 1.05 kg |
| Placement on Vehicle | Upper Front Axle, Left |
| Material | Aluminium |
| Outer diameter | 20 mm |
| Additional Information 2 | with ball joint |
| Inner diameter | 11 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 36335 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.03
Important compatibility info
| Weight | 9.5 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Width | 64.5 mm |
| Outer diameter | 298 mm |
| Thickness | 97.9 mm |
| Inner diameter | 254 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Centering Diameter | 72 mm |
| Number of mounting bores | 2 |
| Max.skimmed drum measure | 255.6 mm |
| Function | Brake Drum |
| Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.03
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| Weight | 1.410 kg |
| for OE number | 11 37 520 39R |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.03
Important compatibility info
| Paired article numbers | 179408 |
| Weight | 7.054 kg |
| Cone Size | 20 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.03
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 0.068 kg |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 330 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.04
Important compatibility info
| Weight | 1.819 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.08
Important compatibility info
| Operating Mode | Hydraulic |
| Spanner Size | 19 |
| Function | Tensioner, timing chain |
| Weight | 0.160 kg |
| for OE number | 271 050 09 11 |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.08
Important compatibility info
| Length | 497 mm |
| Height | 107 mm |
| Width | 302 mm |
| Additional Information | with gasket/seal, with oil drain plug, Oil sump with permanently integrated filter element |
| Additional Information 2 | with bolts/screws |
| Filter type | Screen Filter |
| Transmission Type | Automatic Transmission |
| Weight | 1.890 kg |
| Type | Hydraulic Filter, automatic transmission |
| Function | Hydraulic Filter, automatic transmission |
| Extra Description | febi Plus |
| Replaces | 172288 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.08
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 1.502 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.08
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 15 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Spring-bearing Damper |
| Weight | 2.430 kg |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 550 mm |
| Min. Length | 420 mm |
| Pipe Diameter | 55 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.09
Important compatibility info
| Inner diameter | 85 mm |
| Weight | 3.58 kg |
| Function | Suspension, propshaft |
| Hole Spacing | 220 mm |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.10
Important compatibility info
| Weight | 0.629 kg |
| Type | Oil Pump |
| Function | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.10
Important compatibility info
| Weight | 0.19 kg |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Function | Pressure Converter |
| Extra Description | febi Plus |
| Type | Pressure Converter |
| for OE number | 55203202 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.18
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 249 mm |
| Width | 114.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 28 mm |
| Type | Brake Pad Set, disc brake |
| Weight | 11.382 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.22
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 290 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 95 mm |
| Centering Diameter | 64 mm |
| Surface | Coated |
| Mounting points diameter | 12.47 mm |
| Function | Brake Disc |
| Weight | 8.60 kg |
| Rim Hole Number | 9 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.22
Important compatibility info
| Function | Starter |
| Type | Starter |
| Weight | 4.4 kg |
| Rated Power | 2 kW |
| Voltage | 12 V |
| Number of Teeth | 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.28
Important compatibility info
| Type | Expansion Tank, coolant |
| Weight | 1.975 kg |
| Function | Expansion Tank, coolant |
| Material | PA (polyamide) |
| Length | 619 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.28
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
| Weight | 0.53 kg |
| Additional Information | with gasket/seal, with venting hoses |
| Number of hoses | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Separator, crankcase ventilation (170406)
- 1x Febi Hose, crankcase ventilation (170674)
- 1x Febi Hose, crankcase ventilation (170861)
£76.28
Important compatibility info
| Weight | 5.350 kg |
| Outer diameter 1 | 72 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Width | 52 mm |
| Outer diameter | 100 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 165 mm |
| Inner diameter | 33 mm |
| Bearing Type | Angular Ball Bearing |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (173914)
£76.30
Important compatibility info
| Weight | 0.433 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 11 62 7 805 457 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.30
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Weight | 2.8 kg |
| Material | Cast Iron |
| Paired article numbers | 182706 |
| Vehicle Equipment | for vehicles with electric parking brake |
| Function | Brake Caliper |
| Brake caliper piston diameter | 36 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.31
Important compatibility info
| Function | Brake Caliper |
| Paired article numbers | 182707 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Weight | 2.8 kg |
| Brake caliper piston diameter | 36 mm |
| Vehicle Equipment | for vehicles with electric parking brake |
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with electric motor |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.31
Important compatibility info
| Height | 224 mm |
| Additional Information 2 | with pre-filter |
| Outer diameter | 115.5 mm |
| Additional Information | with gaskets/seals |
| Function | Fuel filter set |
| Type | Fuel filter set |
| Inner diameter | 79.5 mm |
| Weight | 0.70 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.34
Important compatibility info
| Placement on Vehicle | Front Axle |
| Thickness | 54 mm |
| Outer diameter | 304 mm |
| Minimum thickness | 26 mm |
| Centering Diameter | 71.1 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 108 mm |
| Brake Disc Thickness | 28 mm |
| Weight | 9.11 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.36
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 302 mm |
| Thickness | 70 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 24.5 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 90 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Weight | 9.6 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.36
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 200 mm. 155 mm |
| Thickness | 280 mm. 155 mm |
| Function | Bellow, air suspension |
| Weight | 6.5 kg |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| for OE number | 942 320 29 21 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.36
Important compatibility info
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.189 kg |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.37
Important compatibility info
| Weight | 9.720 kg |
| Surface | Coated |
| Placement on Vehicle | Front Axle |
| Thickness | 48.2 mm |
| Brake Disc Thickness | 28 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Number of mounting bores | 2 |
| Rim Hole Number | 5 -Hole |
| Centering Diameter | 72 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Rotor Style | Internally Vented |
| Outer diameter | 320 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.42
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023