Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 103.45 mm |
| Operating pressure to | 10 bar |
| Number of Connectors / Ports | 2 |
| Width | 42.45 mm |
| Voltage | 24 V |
| Weight | 0.429 kg |
| Function | Solenoid Valve |
| Valve type | Solenoid Valve |
| Internal Thread Size | M12 x 1,5 |
| Type | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 110 |
| Weight | 1.444 kg |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | D67HR |
| Additional Information | with chain tensioner, with slide rails |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Guide, timing chain (19079)
- 1x Febi Guide, timing chain (19078)
- 1x Febi Guide, timing chain (19077)
- 1x Febi Timing Chain (25354)
- 1x Febi Tensioner, timing chain (17773)
£76.02
Important compatibility info
| Number of Ribs | 6 |
| Inner diameter | 33 mm |
| Outer diameter | 155 mm |
| Weight | 2.00 kg |
| Thickness | 41.45 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 7PK |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 26453 |
| Cone Size | 22 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Weight | 10.700 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Additional Information | with rubber mounts, with lock nut |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Weight | 7.051 kg |
| Steering arm type | Control Arm |
| Paired article numbers | 181035 |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Length | 633 mm |
| Height | 79 mm |
| Width | 570 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Weight | 3.1 kg |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 53 mm |
| Outer diameter | 74 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Weight | 3.16 kg |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 9 |
| Water pump impeller material | Metal |
| Weight | 1.766 kg |
| Function | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Weight | 3.300 kg |
| Thickness | 82.5 mm |
| Inner diameter | 26 mm |
| Number of Holes | 5 |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Outer diameter | 143 mm |
| Width | 143 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 9.04 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 315 mm |
| Thickness | 47.2 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 64 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023