Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.94 kg |
| Additional Information 2 | with bolts/screws, with washers |
| Material | Rubber/Metal |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Number of Holes | 6 |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (19795)
- 1x Febi Assembly Kit, propshaft joint (43435)
£81.96
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 1.452 kg |
| Chain Type | Duplex, with chain lock |
| Number of Chain Links | 198 |
| Timing Chain Size | D67ZN |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Placement on Vehicle | Front Axle, Driver side |
| Length | 982 mm |
| Outer diameter | 48 mm |
| Rod/Strut | Push Rod |
| Weight | 7.900 kg |
| Colour | red/brown |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Pipe Diameter | 48 mm |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| Replaces | 14485 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 50 mm. 14 mm |
| Piston conrod diameter | 13 mm |
| Min. Length | 286 mm |
| Pipe Diameter | 48 mm |
| Operating Mode | Mechanical |
| Placement on Vehicle | Front |
| Max. Length | 346 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 1.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Track rollers material | Metal |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Outer diameter | 74 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Weight | 1.62 kg |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 5 0407 2744 |
| Width of castor bearing surface | 39 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Weight | 1.04 kg |
| Outer diameter | 60 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Weight | 1.96 kg |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Inner diameter | 25 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Outer diameter | 133 mm |
| Additional Information | with fastening/mounting material |
| Width | 74 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Angular Ball Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Weight | 8.830 kg |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Paired article numbers | 178983 |
| Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Weight | 8.265 kg |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Length | 863 mm |
| Width | 42 mm |
| Thickness | 42 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Placement on Vehicle | Front Axle |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Weight | 0.885 kg |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023