Important compatibility info
Paired article numbers | 175989 |
Weight | 1.003 kg |
Type | Camshaft Adjuster |
Function | Camshaft Adjuster |
Extra Description | febi Plus |
Placement on Vehicle | Exhaust Side |
Number of Teeth | 40 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.900 kg |
Placement on Vehicle | Rear Axle |
Width | 42 mm |
Outer diameter | 228 mm |
Inspection Tag | ECE R90 Approved |
Mounting Type | Pre-assembled |
Function | Brake Shoe Set |
Piston Diameter | 22.2 mm |
Type | Brake Shoe Set |
Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electronic |
Number of Connectors / Ports | 2 |
Function | Boost Pressure Control Valve |
Weight | 0.21 kg |
Type | Boost Pressure Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 1,5 |
Length | 863 mm |
Width | 52 mm |
Placement on Vehicle | Front Axle |
Rod/Strut | Push Rod |
Outer diameter | 52 mm |
Thickness | 100 mm |
Driver Position | for right-hand drive vehicles |
Cone Size | 29 mm |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Weight | 6.9 kg |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Belt Pulley, alternator |
Weight | 4.186 kg |
Inner diameter | 16 mm |
Outer diameter | 116 mm |
Function | Belt Pulley, alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Fill quantity | 12 l |
Additional Information | with lids |
Weight | 3.710 kg |
Length | 471 mm |
Width | 264 mm |
Material | PP (Polypropylene) |
Thickness | 440 mm |
Function | Expansion Tank, coolant |
Extra Description | ProKit |
Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.84 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Vehicle Equipment | for vehicles with electric parking brake |
Brake Caliper Type | Brake Caliper (1 piston) |
Placement on Vehicle | Rear Axle Left |
Additional Information | with electric motor |
Material | Cast Iron |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 44 mm |
Weight | 3.4 kg |
Paired article numbers | 186528 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.4 kg |
Brake Caliper Type | Brake Caliper (1 piston) |
Function | Brake Caliper |
Paired article numbers | 186527 |
Material | Cast Iron |
Brake caliper piston diameter | 44 mm |
Type | Brake Caliper |
Vehicle Equipment | for vehicles with electric parking brake |
Additional Information | with electric motor |
Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Weight | 9.63 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 305 mm |
Thickness | 50.2 mm |
Brake Disc Thickness | 28 mm |
Minimum thickness | 25 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 68 mm |
Surface | Coated |
Number of mounting bores | 5 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Replaces | 43922 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, kingpin |
Length | 223 mm |
Outer diameter | 50 mm |
Extra Description | ProKit |
Type | Repair Kit, kingpin |
Weight | 5.2 kg |
Additional Information 2 | with rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (15337)
- 1x Febi Bush, kingpin (15336)
- 1x Febi Bush, steering knuckle (34565)
- 2x Febi Bush, steering knuckle (08524)
- 2x Febi Repair Kit, kingpin (15335)
- 2x Febi Seal Ring, steering knuckle (03725)
- 2x Febi Seal Ring, steering knuckle (03727)
- 2x Febi Circlip (03729)
- 2x Febi Grease Nipple (01097)
Important compatibility info
Weight | 0.398 kg |
Number of Connectors / Ports | 14 |
Combi Switch Function | with klaxon, with high beam function, with indicator function, with wipe-wash function |
Type | Direction Indicator Switch / Steering Column Switch / Switch, klaxon / Wiper Switch |
Function | Direction Indicator Switch / Steering Column Switch / Switch, klaxon / Wiper Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 5 |
Housing Type | with housing |
Weight | 0.248 kg |
Resistor Type | Hot-film Sensor |
Function | Mass Air Flow Sensor |
Type | Mass Air Flow Sensor |
for OE number | 113 094 00 48 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Material | Plastic |
Colour | Black |
Function | Cylinder Head Cover |
Weight | 1.195 kg |
Extra Description | febi Plus |
Type | Cylinder Head Cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow, air suspension |
Outer diameter | 197 mm. 228 mm |
Thickness | 180 mm. 350 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 6.9 kg |
External Thread Size | M16 x 1,5, M24 x 1,5, M14 x 2 |
Type | Bellow, air suspension |
Additional Information | with piston rod, with piston |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, both sides |
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Weight | 0.58 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | perforated/vented |
Weight | 15.54 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 360 mm |
Thickness | 64.5 mm |
Brake Disc Thickness | 36 mm |
Minimum thickness | 34 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Number of mounting bores | 1 |
Machining | High-carbon |
Function | Brake Disc |
Type | Brake Disc Rotor |
Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Material | Plastic |
Colour | Black |
Type | Cylinder Head Cover |
Function | Cylinder Head Cover |
Extra Description | febi Plus |
for OE number | 03L 103 469 AD |
Weight | 0.981 kg |
Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Placement on Vehicle | Right |
Weight | 1.815 kg |
Type | Mounting, engine |
for OE number | 967 241 34 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 31 mm |
Outer diameter | 120 mm |
Inner diameter | 11 mm |
Number of Teeth | 40 |
Additional Information 2 | with nut |
Function | Gear/Sprocket, camshaft |
Adjustable | Adjustable |
Weight | 0.790 kg |
Extra Description | febi Plus |
Type | Gear/Sprocket, camshaft |
Engine Management | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts |
Material | Cast Steel |
Placement on Vehicle | Front Axle Right, Lower |
Steering arm type | Control Arm |
Paired article numbers | 38285 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 8.405 kg |
Type | Control/Trailing Arm, wheel suspension |
not for OE number | 7H8 407 152 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (38282)
- 1x Febi Mounting, control/trailing arm (28335)
- 1x Febi Mounting, control/trailing arm (26573)
Important compatibility info
Additional Information | with rubber mounts |
Weight | 8.405 kg |
Material | Cast Steel |
Placement on Vehicle | Front Axle Left, Lower |
Steering arm type | Control Arm |
Paired article numbers | 38284 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
not for OE number | 7H8 407 151 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (38283)
- 1x Febi Mounting, control/trailing arm (28335)
- 1x Febi Mounting, control/trailing arm (26573)
Important compatibility info
Number of Connectors / Ports | 8 |
Weight | 0.144 kg |
Type | Relay, glow plug system |
Function | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Paired article numbers | 107125 |
Cable Length | 500 mm. 1200 mm |
Number of circuits | 31 |
Type | Cable Repair Kit, tailgate |
Function | Cable Repair Kit, tailgate |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.200 kg |
Placement on Vehicle | Right |
Paired article numbers | 174775 |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.530 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
for OE number | 5WA 199 262 BE |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Simplex, Closed chain |
Number of Chain Links | 76 |
Weight | 0.372 kg |
Function | Chain Kit, oil pump drive |
Type | Chain Kit, oil pump drive |
Timing Chain Size | G53HR, G53HP |
Wet Boiling Point | 55 °C |
Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (25229)
- 1x Febi Chain Tensioner, oil pump drive (25180)
Important compatibility info
Function | Bellow, air suspension |
Weight | 11.0 kg |
Thickness | 143 mm. 340 mm |
Outer diameter | 286 mm. 200 mm |
External Thread Size | M22 x 1,5, M12 x 1,75 |
Type | Bellow, air suspension |
Additional Information | with piston |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Weight | 1.21 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.892 kg |
Placement on Vehicle | Rear |
Voltage | 12 V |
Function | Wiper Motor |
Number of Connectors / Ports | 4 |
Type | Wiper Motor |
for OE number | 8L0 955 711 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, engine |
Function | Mounting, engine |
Placement on Vehicle | Right |
Weight | 2.002 kg |
Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 326 mm |
Thickness | 46 mm |
Brake Disc Thickness | 30 mm |
Minimum thickness | 28 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 71 mm |
Surface | Coated |
Machining | High-carbon |
Type | Brake Disc Rotor |
Function | Brake Disc |
Weight | 10.08 kg |
Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Weight | 9.310 kg |
Rim Hole Number | 6 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 332 mm |
Thickness | 56.2 mm |
Brake Disc Thickness | 28 mm |
Minimum thickness | 26 mm |
Bolt Hole Circle Diameter | 139.7 mm |
Centering Diameter | 94 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth | 39 |
Weight | 0.9 kg |
Type | Gear, air compressor |
Function | Gear, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.925 kg |
Placement on Vehicle | Front Axle |
Length | 710 mm |
Outer diameter | 42 mm |
Thickness | 122 mm |
Rod/Strut | Push Rod |
Cone Size | 32 mm |
Function | Centre Rod Assembly |
External Thread Size | M27 x 1,5 |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.744 kg |
Placement on Vehicle | Front Axle Right, Lower |
Steering arm type | Control Arm |
Paired article numbers | 180544 |
Cone Size | 22 mm |
Additional Information 2 | with ball joint |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,25 |
Additional Information | with lock nut, with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.7 kg |
Placement on Vehicle | Front Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 617 mm |
Min. Length | 377 mm |
Pipe Diameter | 54 mm. 63 mm |
Mounting points diameter | 16 mm |
Piston conrod diameter | 15 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.442 kg |
Placement on Vehicle | Front Axle Left |
Min. Length | 635 mm |
External Teeth, Diff.Side | 26 |
External Teeth, Wheel Side | 27 |
Thread Size | M22x1,5 |
Additional Information 2 | with nut |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 89.5 mm |
Wheel Sided Joint Diameter | 86 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 11.0 kg |
Rim Hole Number | 5 -Hole |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 308 mm |
Thickness | 61 mm |
Brake Disc Thickness | 31 mm |
Minimum thickness | 28 mm |
Bolt Hole Circle Diameter | 113.5 mm |
Centering Diameter | 93 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 26642 |
Weight | 2.63 kg |
Placement on Vehicle | Front Axle Left, Lower |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.63 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 26641 |
Additional Information | with nuts |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Right |
Weight | 1.560 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 217 mm |
Material | Rubber/Metal |
Additional Information 2 | with rolling bearing |
Inner diameter | 45 mm |
Weight | 1.320 kg |
Bearing Type | Rolling Bearing |
Type | Suspension, propshaft |
Function | Suspension, propshaft |
Hole Spacing | 169 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.381 kg |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 164 |
Function | Timing Chain |
Type | Timing Chain |
Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.315 kg |
Length | 52 mm |
Width | 120 mm |
Thickness | 86.5 mm |
Voltage | 12 V |
Function | Relay, glow plug system |
Type | Relay, glow plug system |
Hole Spacing | 99.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Placement on Vehicle | both sides |
External Thread Size | M12 x 1,75 |
Weight | 4.243 kg |
Type | Mounting, engine |
for OE number | 1806 720 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Housing length | 318.5 mm |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Mounting points diameter | 17.8 mm |
Stroke | 180 mm |
Length | 546 mm |
Function | Gas Spring, boot/cargo area |
Housing Diameter | 19 mm |
Eject Force | 600 N |
Weight | 0.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Push Rod |
Function | Centre Rod Assembly |
Weight | 8.500 kg |
Additional Information | with nuts |
Type | Centre Rod Assembly |
Length | 1030 mm |
Extra Description | ProKit |
Thread Size | M24 x 1,5 |
Placement on Vehicle | Front Axle |
Adjustable | Adjustable on both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 183593 |
Weight | 2.9 kg |
Cone Size | 14 mm |
Placement on Vehicle | Front Axle Left, Lower |
Material | Aluminium |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Cone Size 2 | 18 mm |
External Thread Size | M12 x 1,25 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Cone Size 2 | 18 mm |
External Thread Size | M12 x 1,25 |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 14 mm |
Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 183592 |
Placement on Vehicle | Front Axle Right, Lower |
Weight | 2.9 kg |
Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023