Important compatibility info
Placement on Vehicle | Front Axle Left |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 170964 |
Cone Size | 24 mm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
Weight | 5.18 kg |
External Thread Size | M14 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.2 kg |
External Thread Size | M10 x 1 |
Placement on Vehicle | Front |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 430 mm |
Min. Length | 287 mm |
Pipe Diameter | 45 mm. 81 mm |
Mounting points diameter | 14 mm. 20 mm |
Piston conrod diameter | 20 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Transmission-side joint diameter | 85.5 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Wheel Sided Joint Diameter | 105 mm |
Min. Length | 638 mm |
External Teeth, Diff.Side | 37 |
Placement on Vehicle | Front Axle Left |
Weight | 7.692 kg |
External Teeth, Wheel Side | 38 |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Front Axle Left |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Weight | 7.039 kg |
Cone Size | 20 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
External Thread Size | M16 x 1,5 |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Paired article numbers | 179226 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.33 kg |
Type | Oil Cooler, engine oil |
Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.422 kg |
for OE number | 03C 115 105 N SK |
Type | Oil Pump |
Function | Oil Pump |
Additional Information 2 | without gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.916 kg |
Paired article numbers | 182626 |
Material | Sheet Steel |
Steering arm type | Control Arm, Four-Point Link (CV) |
Placement on Vehicle | Front Axle Left, Lower, outer |
Additional Information 2 | with ball joint |
Cone Size | 22 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Belt Pulley, alternator |
Weight | 4.186 kg |
Inner diameter | 16 mm |
Outer diameter | 116 mm |
Function | Belt Pulley, alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with bolts/screws |
Weight | 0.197 kg |
Material | Steel |
Type | Pipe, EGR valve |
Function | Pipe, EGR valve |
Extra Description | febi Plus |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 182625 |
Weight | 5.916 kg |
Placement on Vehicle | Front Axle Right, Lower, outer |
Material | Sheet Steel |
Cone Size | 22 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.630 kg |
Width | 19 mm |
Additional Information | with gaskets/seals, with fastening/mounting material |
Number of Teeth | 99 |
Surface | Coated |
for OE number | 23356-42500 S5 |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Belts | with rounded tooth profile |
Width of castor bearing surface | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (26114)
- 1x Febi Water Pump, engine cooling (173143)
Important compatibility info
Function | Cable Repair Kit, tailgate |
Paired article numbers | 107122 |
Placement on Vehicle | Right |
Plug Type | Male, Female |
Cable Length | 1250 mm. 900 mm |
Number of circuits | 23 |
Extra Description | febi Plus |
Type | Cable Repair Kit, tailgate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.900 kg |
Placement on Vehicle | Rear Axle |
Width | 42 mm |
Outer diameter | 228 mm |
Inspection Tag | ECE R90 Approved |
Mounting Type | Pre-assembled |
Function | Brake Shoe Set |
Piston Diameter | 22.2 mm |
Type | Brake Shoe Set |
Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 225 mm |
Weight | 4.32 kg |
Function | Repair Kit, kingpin |
Outer diameter | 50 mm |
Extra Description | ProKit |
Type | Repair Kit, kingpin |
Additional Information 2 | with slide bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bush, kingpin (28397)
- 2x Febi Bush, steering knuckle (08524)
- 1x Febi Bush, steering knuckle (28396)
- 1x Febi Lock Ring, steering knuckle (28395)
- 2x Febi Circlip (05370)
- 1x Febi Lock Ring, steering knuckle (28394)
- 1x Febi Grease Nipple (01094)
- 2x Febi Seal Ring, steering knuckle (28398)
- 1x Febi Kingpin (32432)
- 1x Febi Nut (32433)
- 1x Febi Screw (32435)
- 1x Febi Spacer, kingpin (32436)
- 2x Febi Seal Ring, steering knuckle (32434)
Important compatibility info
Placement on Vehicle | Rear Axle |
Weight | 2.35 kg |
Width | 36 mm |
Function | Bearing / Wheel Bearing |
Outer diameter | 155 mm |
Sealing lip material | ACM (Polyacrylate) |
Type | Bearing / Wheel Bearing |
Bearing Type | Tapered Roller Bearing |
Inner diameter | 100 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.150 kg |
Type | Release Fork, clutch |
Additional Information 2 | with bolts/screws |
Additional Information | with bush, with fastening/mounting material |
Function | Release Fork, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Bottom Pin, Top eye |
Max. Length | 382 mm |
Min. Length | 309 mm |
Mounting points diameter | 14 mm |
Weight | 2.5 kg |
Type | Shock Absorber, driver cab suspension |
External Thread Size | M12 x 1,5 |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | ProKit |
Weight | 9.000 kg |
Placement on Vehicle | Front Axle |
Length | 848 mm |
Outer diameter | 52 mm |
Rod/Strut | Push Rod |
Cone Size | 26 mm |
Pipe Diameter | 52 mm |
Function | Centre Rod Assembly |
External Thread Size | M20 x 1,5 |
Type | Centre Rod Assembly |
Replaces | 18206 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Weight | 0.717 kg |
Type | Belt Tensioner, v-ribbed belt |
Function | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Weight | 1.587 kg |
Additional Information | with fastening/mounting material |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 38 mm |
Outer diameter | 70.3 mm |
Inner diameter | 25 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 108 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023