Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 96 mm |
| Material | Plastic |
| Outer diameter | 80 mm |
| Inner diameter | 73 mm |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Weight | 0.18 kg |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.15
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Cast Steel |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 174796 |
| Weight | 9.29 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.16
Important compatibility info
| Weight | 9.29 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 174795 |
| Steering arm type | Control Arm |
| Placement on Vehicle | Lower, Front Axle Left |
| Material | Cast Steel |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.16
Important compatibility info
| Hole Spacing | 115 mm |
| Weight | 8.32 kg |
| Placement on Vehicle | Rear Axle |
| Length | 542 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 46 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.17
Important compatibility info
| Weight | 0.129 kg |
| Number of Connectors / Ports | 13 |
| Combi Switch Function | with wipe interval function, with rear wipe-wash function, with wipe-wash function, with board computer function |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.19
Important compatibility info
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake caliper piston diameter | 38 mm |
| Function | Brake Caliper |
| Paired article numbers | 184106 |
| Weight | 1.95 kg |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Aluminium |
| Additional Information | with electric motor |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.20
Important compatibility info
| Vehicle Equipment | for vehicles with electric parking brake |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 184105 |
| Weight | 1.95 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Additional Information | with electric motor |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.20
Important compatibility info
| Weight | 1.783 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.23
Important compatibility info
| Outer diameter | 365 mm |
| Number of mounting bores | 1 |
| Weight | 10.15 kg |
| Surface | Coated |
| Brake Disc Thickness | 20 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Placement on Vehicle | Rear Axle |
| Minimum thickness | 18 mm |
| Centering Diameter | 79.1 mm |
| Thickness | 59 mm |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.24
Important compatibility info
| Inner diameter | 14 mm |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Outer diameter | 177 mm |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Weight | 1.420 kg |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (104271)
- 1x Febi Nut (34653)
- 6x Febi Screw (104749)
£90.26
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 148 |
| Timing Chain Size | G53RT, G53RING-1, G53RING-2 |
| Function | Timing Chain |
| Weight | 0.480 kg |
| Type | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.28
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 6.179 kg |
| External Teeth, Diff.Side | 33 |
| Min. Length | 916 mm |
| Wheel Sided Joint Diameter | 77.4 mm |
| Transmission-side joint diameter | 75 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.32
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left Rear, Right Rear |
| Weight | 4.200 kg |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 2136 889 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.34
Important compatibility info
| Additional Information | with piston |
| Outer diameter | 286 mm. 259 mm |
| Thickness | 640 mm. 240 mm |
| Weight | 11.65 kg |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| External Thread Size | M22, M12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.34
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Thickness | 51 mm |
| Additional Information 2 | with ball bearing, with fastening material |
| Weight | 1.200 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.35
Important compatibility info
| Width of castor bearing surface | 33 mm |
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Weight | 1.78 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.39
Important compatibility info
| Function | Housing, oil filter |
| Additional Information | with gasket/seal, with oil filter, with oil cooler |
| Weight | 2.750 kg |
| Extra Description | febi Plus |
| Type | Housing, oil filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.41
Important compatibility info
| Weight | 8.44 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 8 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 290 mm |
| Thickness | 70 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 96 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.50
Important compatibility info
| Weight | 0.16 kg |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Housing Type | with housing |
| Material | Plastic |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.51
Important compatibility info
| Rotor Style | Solid |
| Weight | 5.4 kg |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 240 mm |
| Thickness | 80.6 mm |
| Brake Disc Thickness | 8 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 52.3 mm |
| Surface | Oiled |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Additional Information 2 | with grease cap, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.51
Important compatibility info
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Weight | 0.078 kg |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.53
Important compatibility info
| Weight | 1.299 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 120 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR, G53HP |
| Part number of the recommended special tools | ADK85501 |
| Replaces | 49622 |
| Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (23778)
- 1x Febi Tensioner, timing chain (28458)
- 1x Febi Guide, timing chain (31543)
- 1x Febi Guide, timing chain (31544)
- 1x Febi Sprocket, crankshaft (31545)
- 1x Febi Gear/Sprocket, camshaft (31546)
- 1x Febi Gasket, timing case (32153)
- 1x Febi Shaft Seal, crankshaft (32154)
- 1x Febi Pulley Bolt (47593)
- 1x Febi Oil Hose (49568)
£90.53
Important compatibility info
| External Thread Size | M27 x 2,5 |
| Operating Mode | Mechanical |
| Weight | 0.227 kg |
| Length | 82 mm |
| Material | Metal |
| Spanner Size | 32 |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.55
Important compatibility info
| Weight | 0.7 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 11 65 7 802 595 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.59
Important compatibility info
| Weight | 9.5 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Width | 64.5 mm |
| Outer diameter | 298 mm |
| Thickness | 97.9 mm |
| Inner diameter | 254 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Centering Diameter | 72 mm |
| Number of mounting bores | 2 |
| Max.skimmed drum measure | 255.6 mm |
| Function | Brake Drum |
| Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.60
Important compatibility info
| Function | Bellow, air suspension |
| Weight | 3.6 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 257 mm. 130 mm |
| Thickness | 475 mm |
| External Thread Size | M22 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.62
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 31.9 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Function | Brake Disc |
| Weight | 11.15 kg |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.62
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.130 kg |
| Cable Length | 907 mm |
| Number of circuits | 6 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.63
Important compatibility info
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Design | Suspension Strut |
| Weight | 1.920 kg |
| Pipe Diameter | 54 mm. 45 mm |
| Min. Length | 331 mm |
| Mounting bores distance | 446 mm |
| Max. Length | 446 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Bore Diameter | 12 mm. 13 mm |
| Type | Shock Absorber |
| Shock Absorber System | Twin-Tube |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.66
Important compatibility info
| Min. Length | 255 mm |
| Piston conrod diameter | 28 mm |
| Max. Length | 437 mm |
| Bore Diameter | 15 mm |
| Pipe Diameter | 58 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 90 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Shock Absorber System | Twin-Tube |
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Weight | 4.907 kg |
| Shock Absorber Type | Gas Pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.66
Important compatibility info
| Shock Absorber Type | Gas Pressure |
| Bore Diameter | 16 mm |
| Min. Length | 382 mm |
| Pipe Diameter | 51 mm |
| Mounting bores distance | 64.5 mm |
| External Thread Size | M14 x 1,5 |
| Function | Shock Absorber |
| Piston conrod diameter | 22 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Weight | 5.110 kg |
| Shock Absorber Design | Suspension Strut |
| Type | Shock Absorber |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Max. Length | 541 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.66
Important compatibility info
| Placement on Vehicle | Right, Charge Air Cooler |
| Material | FKM (fluorocarbon rubber), Silicone |
| Inner diameter 1 | 45 mm |
| Inner diameter 2 | 43 mm |
| Weight | 0.49 kg |
| Type | Charge Air Hose |
| Wall Thickness | 5.5 mm |
| Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.66
Important compatibility info
| Type | Shock Absorber |
| Max. Length | 571 mm |
| Piston conrod diameter | 25 mm |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Weight | 6.200 kg |
| Pipe Diameter | 58 mm |
| External Thread Size | M14 x 1,5 |
| Shock Absorber System | Twin-Tube |
| Function | Shock Absorber |
| Min. Length | 322 mm |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.66
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Rotor Style | Internally Vented |
| Weight | 10.5 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 338 mm |
| Thickness | 68.3 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 29 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 108 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.68
Important compatibility info
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 2.167 kg |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.70
Important compatibility info
| Weight | 4.88 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 671 mm |
| Min. Length | 418 mm |
| Pipe Diameter | 76 mm. 63.4 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.71
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.500 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 456 mm |
| Max. Length | 456 mm |
| Min. Length | 298 mm |
| Pipe Diameter | 63 mm. 54 mm |
| Piston conrod diameter | 18 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.73
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 11.039 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 334 mm |
| Thickness | 51.6 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.80
Important compatibility info
| Weight | 2.8 kg |
| Width | 143 mm |
| Outer diameter | 84 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.80
Important compatibility info
| Weight | 0.510 kg |
| Extra Description | febi Plus |
| Type | Valve, crankcase ventilation |
| Function | Valve, crankcase ventilation |
| for OE number | 11 61 7 533 400 S1 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (39653)
- 1x Febi Hose, crankcase ventilation (36730)
- 1x Febi Hose, crankcase ventilation (36031)
- 1x Febi Hose, crankcase ventilation (47227)
- 1x Febi Hose, crankcase ventilation (47228)
£90.83
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 3 |
| Pump Type | Dual Pump |
| Function | Washer Fluid Pump, window cleaning |
| Weight | 0.001 kg |
| Type | Washer Fluid Pump, window cleaning |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.83
Important compatibility info
| Weight | 2.08 kg |
| Placement on Vehicle | Front, Left |
| Outer diameter | 382 mm |
| Operating Mode | Electric |
| Rated Power | 320 W |
| Number of Wings | 11 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.83
Important compatibility info
| Weight | 18.35 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 337 mm |
| Thickness | 100.5 mm |
| Brake Disc Thickness | 30 mm |
| Brake Disc Type | Solid |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 91.5 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rim Hole Number | 10 -Hole |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.85
Important compatibility info
| Thickness | 138 mm |
| Brake Disc Thickness | 30 mm |
| Brake Disc Type | Internally Vented |
| Surface | Coated |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 322 mm |
| Weight | 16.0 kg |
| Rim Hole Number | 8 -Hole |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 275 mm |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.85
Important compatibility info
| Paired article numbers | 08520 |
| Function | Repair Kit, kingpin |
| Weight | 2.71 kg |
| Additional Information | with Thrust Bearing |
| Length | 217 mm |
| Outer diameter | 38 mm |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (08512)
- 4x Febi Bush, steering knuckle (08513)
- 2x Febi Seal Ring, steering knuckle (08514)
- 2x Febi Circlip (04328)
- 1x Febi Pressure Piece, kingpin (01500)
- 1x Febi Nut (02574)
- 1x Febi Springwasher (07583)
- 1x Febi Lock Ring, steering knuckle (04326)
- 1x Febi Lock Ring, steering knuckle (04325)
- 1x Febi Spacer, kingpin (08516)
- 1x Febi Spacer, kingpin (08517)
- 2x Febi Seal Ring, steering knuckle (04327)
£90.85
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 38843 |
| Steering arm type | Control Arm |
| Outer diameter | 22 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Weight | 7.11 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joints |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Surface | Coated |
| Weight | 14.7 kg |
| Outer diameter | 312 mm |
| Thickness | 116 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 192 mm |
| Centering Diameter | 118 mm |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Rod/Strut | Coupling Rod |
| Bore Diameter | 22 mm |
| Weight | 5.185 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Diameter | 50 mm |
| Length | 400 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| for OE number | 13506-47030 S3 |
| Weight | 0.957 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 136 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (181627)
- 1x Febi Tensioner, timing chain (177726)
- 1x Febi Seal, timing chain tensioner (180646)
- 1x Febi Guide, timing chain (181874)
- 1x Febi Guide, timing chain (179925)
£90.87
Important compatibility info
| Weight | 0.231 kg |
| Function | Steering Column Switch / Switch, engine brake |
| Number of Connectors / Ports | 4 |
| for OE number | 1975 672 |
| Type | Steering Column Switch / Switch, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023