Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M28 x 1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 9.422 kg |
| External Teeth, Diff.Side | 30 |
| Min. Length | 630 mm |
| Wheel Sided Joint Diameter | 108.6 mm |
| Transmission-side joint diameter | 95 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 397 mm |
| Min. Length | 188 mm |
| Pipe Diameter | 94 mm. 51 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Weight | 4.8 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Weight | 0.55 kg |
| Outer diameter | 38 mm |
| Operating Mode | Electronic |
| Opening Temperature | 105 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Function | Air Filter |
| Height | 525 mm |
| Outer diameter | 303 mm |
| Weight | 3.33 kg |
| Inner diameter | 167 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| for OE number | 1 869 992 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Inner diameter | 125 mm |
| Number of Wings | 9 |
| Thickness | 117 mm |
| Outer diameter | 750 mm |
| Function | Fan Wheel, engine cooling |
| Type | Fan Wheel, engine cooling |
| Weight | 6.80 kg |
| for OE number | 51.06601.0275 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Weight | 6.3 kg |
| Rod/Strut | Push Rod |
| Length | 895.5 mm |
| Function | Centre Rod Assembly |
| Cone Size | 22 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 40 mm |
| Internal Thread Size | M30 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M18 x 1,5 |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Weight | 2.020 kg |
| Additional Information 2 | with tensioner element |
| Number of Ribs | 8 |
| Length | 880 mm |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29037)
- 1x Febi Belt Tensioner, v-ribbed belt (22852)
£89.88
Important compatibility info
| Function | Fan Wheel, engine cooling |
| Weight | 5.10 kg |
| Outer diameter | 700 mm |
| Thickness | 90 mm |
| Bolt Hole Circle Diameter | 155 mm |
| Number of Wings | 8 |
| for OE number | 906 205 04 06 |
| Type | Fan Wheel, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 871 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Weight | 7.05 kg |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Width of castor bearing surface | 38 mm |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Units / Pulleys | incl. deflection pulley |
| Function | V-Ribbed Belt Set |
| Length | 1512 mm |
| Number of Ribs | 10 |
| Weight | 3.0 kg |
| Type | V-Ribbed Belt Set |
| Additional Information | with belt tensioner for V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Tensioner, v-ribbed belt (35534)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (30646)
- 1x Febi V-Ribbed Belt (40706)
£89.88
Important compatibility info
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Placement on Vehicle | Front Axle |
| Length | 837 mm |
| Rod/Strut | Push Rod |
| Weight | 6.4 kg |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Weight | 6.960 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 36346 |
| Additional Information | with rubber mounts, with lock nut |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M28x1,5 |
| External Teeth, Wheel Side | 28 |
| Weight | 8.782 kg |
| External Teeth, Diff.Side | 37 |
| Number of Teeth, ABS ring | 54 |
| Min. Length | 768 mm |
| ABS Ring Diameter | 110 mm |
| Wheel Sided Joint Diameter | 99 mm |
| Transmission-side joint diameter | 89 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2 kW |
| Weight | 0.032 kg |
| for OE number | 28100-0B020 |
| Type | Starter |
| Output from | 2.0 kW |
| Output to | 2.2 kW |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Weight | 2.400 kg |
| Operating pressure to | 10 bar |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
| Type | Hydraulic Pump, steering |
| Number of mounting bores | 3 |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Weight | 1.988 kg |
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 47735 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32231)
- 2x Febi Mounting and Bolting Kit, control/trailing arm (29279)
£89.88
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Weight | 3.1 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 323 mm |
| Min. Length | 238 mm |
| Pipe Diameter | 85 mm. 38 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Outer diameter | 54 mm |
| Additional Information | with kingpin |
| Length | 222.5 mm |
| Function | Repair Kit, kingpin |
| Type | Repair Kit, kingpin |
| Weight | 5.1 kg |
| Paired article numbers | 15897 |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (15864)
- 4x Febi Bush, steering knuckle (15858)
- 1x Febi Seal Ring, steering knuckle (15886)
- 1x Febi Bush, steering knuckle (15889)
- 1x Febi Washer (15887)
£89.88
Important compatibility info
| Parameter | 6PK |
| Width | 36 mm |
| Material | Steel |
| Outer diameter | 169 mm |
| Inner diameter | 31 mm |
| Number of Ribs | 5 |
| Weight | 1.84 kg |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Fill quantity | 11.5 l |
| Weight | 2.615 kg |
| Function | Expansion Tank, coolant |
| Thickness | 147 mm |
| Number of Connectors / Ports | 2 |
| Material | PP (Polypropylene) |
| Width | 174 mm |
| Length | 477 mm |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
| Additional Information | with lids, with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023