Important compatibility info
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M33x1,5 |
| Wheel Sided Joint Diameter | 112 mm |
| Transmission-side joint diameter | 103.5 mm |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 41 |
| Min. Length | 1086 mm |
| External Teeth, Wheel Side | 35 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | Basic Short Kit |
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 154 |
| Type | Timing Chain Kit |
| Part number of the recommended special tools | 193083 |
| Function | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (186214)
- 1x Febi Tensioner, timing chain (181992)
- 1x Febi Guide, timing chain (181668)
- 1x Febi Guide, timing chain (181626)
- 1x Febi Guide, timing chain (187690)
Important compatibility info
| Placement on Vehicle | Front Axle, outer |
| Length | 980 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Brake Type | Drum Brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M18x1,5 |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 39 |
| Min. Length | 986 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
| Transmission-side joint diameter | 87 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 34 |
| Min. Length | 925 mm |
| Wheel Sided Joint Diameter | 82 mm |
| Transmission-side joint diameter | 82.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 328 mm |
| Thickness | 49 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
| for OE number | 028 109 101 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 105 mm |
| Additional Information | with nuts |
| Number of Holes | 6 |
| Extra Description | ProKit |
| Additional Information 2 | with bolts/screws |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Assembly Kit, propshaft joint (43515)
Important compatibility info
| Width | 157 mm |
| Placement on Vehicle | Upper Left |
| Function | Mounting, automatic transmission |
| Length | 193 mm |
| Number of Connectors / Ports | 2 |
| Type | Mounting, automatic transmission |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Height | 153 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower |
| Function | Mounting, automatic transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Water pump impeller material | Plastic |
| Number of Wings | 6 |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
| Additional Information 2 | switchable water pump, with bolts/screws |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1 543 750 |
| Hole Spacing | 219 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 193 mm |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Number of Ribs | 5 |
| Inner diameter | 18 mm |
| Thickness | 37.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 429 mm |
| Housing Diameter | 19 mm |
| Eject Force | 520 N |
| Stroke | 136 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 64 mm |
| Parameter | 6PK + 5PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 166 mm |
| Inner diameter | 35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Upper Right |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Operating Mode | Electric |
| Paired article numbers | 176514 |
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Diaphragm Brake Cylinder |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 15 mm |
| Parameter | Typ 16 / 24 |
| Brake Type | Disc Brake |
| Additional Information | with fastening/mounting material |
| Type | Diaphragm Brake Cylinder |
| Stroke | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 340 mm |
| Thickness | 55.4 mm |
| Brake Disc Thickness | 32.2 mm |
| Minimum thickness | 28.5 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 336 mm |
| Thickness | 52 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















