Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 50 mm |
| Current Strength | 90 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Paired article numbers | 197191 |
| Number of Connectors / Ports | 6 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 29 |
| External Teeth, Diff.Side | 25 |
| Min. Length | 761 mm |
| Wheel Sided Joint Diameter | 84.8 mm |
| Transmission-side joint diameter | 80.8 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 62 mm |
| Thickness | 121 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 32 mm |
| Pipe Diameter | 50 mm |
| Length | 1596 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| External Thread Size | M27 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Adjustable | Adjustable on one side |
| Cone Size | 28.6 mm |
| Diameter 1 | 52 mm |
| Rod/Strut | Push Rod |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Placement on Vehicle | Front Axle |
| Length | 895 mm |
| Material | Steel |
| Additional Information 2 | with crown nut |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Port / Connector type | Voss 232 |
| Placement on Vehicle | Rear Axle Left |
| Outer diameter | 259 mm. 200 mm |
| Paired article numbers | 177169 |
| Thickness | 550 mm. 200 mm |
| Additional Information | with piston |
| External Thread Size | M22 x 1,5 |
| Rolling piston material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 177168 |
| Thickness | 550 mm. 200 mm |
| Outer diameter | 259 mm. 200 mm |
| External Thread Size | M22 x 1,5, M16 x 1,5 |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Port / Connector type | Voss 232 |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with piston |
| Rolling piston material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Front |
| Length | 183 mm |
| Width | 121 mm |
| Thickness | 131 mm |
| Paired article numbers | 30627 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Replaces | 27416 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 400 mm |
| Spanner Size | 32 |
| Number of Wings | 7 |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bolt Hole Circle Diameter | 112 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 4 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| for OE number | 103 200 38 01 |
| Housing material | Cast Aluminium |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Clutch Release Bearing |
| for OE number | 74 21 188 863 |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
Technical Information
Not replaceable by 4G0 199 381 NF (febi 180761 / SWAG 33 10 7602).
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Number of Connectors / Ports | 5 |
| Function | Wiper Motor |
| Placement on Vehicle | Front |
| Type | Wiper Motor |
| Additional Information 2 | with cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Wheel Bearing |
| Inner diameter | 78 mm |
| Bearing Type | Tapered Roller Bearing |
| Width | 90 mm |
| Outer diameter | 130 mm |
| Type | Wheel Bearing |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 233 mm |
| Outer diameter | 111 mm |
| Filter type | Filter Insert |
| Type | Fuel filter set |
| Function | Fuel filter set |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Material | Steel |
| Outer diameter | 396 mm |
| Number of Connectors / Ports | 4 |
| Capacity | 50 l |
| Function | Air Tank, compressed-air system |
| Type | Air Tank, compressed-air system |
| Operating Pressure | 15 bar |
| Length | 498 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16x1,5 |
| Paired article numbers | 188146 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 28 |
| Min. Length | 627 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 75.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















