Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 280 mm |
| Thickness | 102.3 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Centering Diameter | 65 mm |
| Surface | Oiled |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Additional Information 2 | with ABS sensor ring, with grease cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.50
Important compatibility info
| Outer diameter | 119 mm |
| Number of Teeth | 38 |
| Operating Mode | Hydraulic |
| Spanner Size | 18 |
| Quality/ Grade | 10.9 |
| Additional Information 2 | with screw |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| External Thread Size | M12 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.52
Important compatibility info
| Min. Length | 897 mm |
| Additional Information 2 | with nut |
| Thread Size | M22 x 1,5 |
| External Teeth, Wheel Side | 26 |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Transmission-side joint diameter | 75 mm |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 81 mm |
| External Teeth, Diff.Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.52
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 147 mm |
| Outer diameter | 90 mm |
| Inner diameter | 22 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (102830)
- 1x Febi Axle Bolt, drive shaft (104750)
£116.52
Important compatibility info
| Number of Wings | 11 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| for OE number | 51.06500.6432 |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Housing material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.55
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Housing material | Grey Cast Iron |
| Seal Material | Rubber, Paper |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 542 200 24 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.55
Important compatibility info
| Function | Shock Absorber |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 638 mm |
| Min. Length | 401 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.55
Important compatibility info
| Type | Clutch Disc |
| for OE number | 1395 705 |
| Function | Clutch Disc |
| Outer diameter | 420 mm |
| Number of Teeth | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.55
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 14 mm. 35 mm |
| Min. Length | 281 mm |
| Pipe Diameter | 62 mm. 44 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Max. Length | 360 mm |
| Placement on Vehicle | Front, both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.55
Important compatibility info
| Placement on Vehicle | Left Front, Driver side, Front Axle Left |
| Length | 902 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.55
Important compatibility info
| Surface | Coated |
| Number of Teeth | 129 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Width | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (23437)
- 1x Febi Water Pump, engine cooling (24194)
£116.56
Important compatibility info
| Length | 860 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | adjustable |
| Pipe Diameter | 62 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Housing Type | with housing |
| for OE number | 06J 906 461 D |
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.58
Important compatibility info
| Number of Teeth | 178 |
| Function | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Water pump impeller material | Metal |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Type | Water Pump & Timing Belt Kit |
| for OE number | 13568-29035 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (26811)
- 1x Febi Water Pump, engine cooling (30638)
£116.64
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 49 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.79
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| Bolt Hole Circle Diameter | 131.3 mm |
| Bore Diameter | 10.8 mm |
| External Teeth, Wheel Side | 29 |
| Number of mounting bores | 2 |
| External Teeth, Diff.Side | 29 |
| Min. Length | 1006 mm |
| Wheel Sided Joint Diameter | 100.4 mm |
| Transmission-side joint diameter | 94 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.79
Important compatibility info
| Function | Housing, oil filter |
| Type | Housing, oil filter |
| Additional Information | with gasket/seal, with oil cooler, with oil filter |
| Width | 185 mm |
| Height | 227 mm |
| Length | 217 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.82
Important compatibility info
| Additional Information 2 | with switch |
| Number of Connectors / Ports | 7 |
| Function | Steering Lock |
| Lock System | without lock barrel |
| Type | Steering Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.83
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Spanner Size | 32 |
| Number of Connectors / Ports | 4 |
| Cable Length | 180 mm |
| Type | Sensor, oil pressure |
| Function | Sensor, oil pressure |
| for OE number | 1 881 260 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.89
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 280 mm |
| Thickness | 104.5 mm |
| Additional Information 2 | with wheel bearing, with ABS sensor ring |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.92
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023