Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Additional Information 2 | with rubber mount, with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 180935 |
| Cone Size | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.98
Important compatibility info
| Width | 18 mm |
| Function | Timing Belt Kit |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 116 |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (47999)
- 1x Febi Toothed Belt, power take-off (49234)
- 1x Febi Tensioner Pulley, timing belt (100320)
£117.02
Important compatibility info
| Width | 89 mm |
| Outer diameter | 123 mm |
| Type | Airbag Lifting Device Roll, lift axle |
| Function | Airbag Lifting Device Roll, lift axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.02
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 54 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.02
Important compatibility info
| Length | 98 mm |
| Number of Connectors / Ports | 4 |
| Function | Main Switch, battery |
| Type | Main Switch, battery |
| Hole Spacing | 59 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.03
Important compatibility info
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.03
Important compatibility info
| Number of Teeth | 27 |
| Number of Wings | 12 |
| Housing material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.05
Important compatibility info
| for OE number | 11 12 7 588 412 |
| Material | Plastic |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.05
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Pipe Diameter | 70 mm. 41 mm |
| Min. Length | 217 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Function | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 13 mm |
| Max. Length | 279 mm |
| External Thread Size | M12 x 1,75 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.08
Important compatibility info
| Function | Hydraulic Pump, steering |
| Length | 173 mm |
| Height | 123 mm |
| Width | 152 mm |
| Rotation Direction | Clockwise rotation |
| Mounting points diameter | 11 mm |
| Number of Connectors / Ports | 2 |
| Internal Thread Size | M26 x 1,5, M16 x 1,5 |
| Type | Hydraulic Pump, steering |
| for OE number | 50 10 600 046 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.10
Important compatibility info
| Type | EGR Valve |
| Function | EGR Valve |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.10
Important compatibility info
| Spring Design | Leaf spring |
| Width | 104 mm |
| Type | Spring Pack |
| Number of spring leaves | 1 |
| Function | Spring Pack |
| Length | 715 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.12
Important compatibility info
| Inner diameter | 26 mm |
| Placement on Vehicle | Rear Axle |
| Width | 133 mm |
| Outer diameter | 68 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.12
Important compatibility info
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.12
Important compatibility info
| Outer diameter | 137 mm |
| Inner diameter | 50 mm |
| Inner diameter 1 | 12 mm |
| Function | Joint, propshaft |
| Screw length below head | 65 mm |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| External Thread Size | M12 x 1,5 |
| Number of Holes | 6 |
| Additional Information 2 | with bolts/screws, with washers |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (45722)
- 3x Febi Screw (09759)
- 1x Febi Assembly Kit, propshaft joint (22118)
£117.14
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 100 A |
| Belt Pulley Diameter | 55 mm |
| Current Strength | 100 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.20
Important compatibility info
| Function | Connecting Rod |
| Type | Connecting Rod |
| for OE number | 51.02400.6279 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.24
Important compatibility info
| Function | Brake Disc |
| Rotor Style | perforated/vented |
| Centering Diameter | 67 mm |
| Thickness | 50.9 mm |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Outer diameter | 350 mm |
| Surface | Coated |
| Placement on Vehicle | Front Axle |
| Minimum thickness | 28 mm |
| Number of mounting bores | 1 |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.31
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.32
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 335 mm |
| Thickness | 64.5 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | perforated/vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.33
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023