Important compatibility info
Weight | 2.5 kg |
Material | Cast Aluminium |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.296 kg |
Voltage | 24 V |
Number of Connectors / Ports | 5 |
Additional Information 2 | with bolts/screws, with nut, with cable |
Type | Wiper Motor |
Function | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 18011-RNA-A00 |
Weight | 0.825 kg |
Additional Information | with gasket/seal |
Number of Connectors / Ports | 5 |
Type | EGR Valve |
Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Drive Shaft |
Transmission-side joint diameter | 81 mm |
Wheel Sided Joint Diameter | 91 mm |
Min. Length | 960 mm |
Thread Size | M10x1,5 |
External Teeth, Wheel Side | 36 |
Weight | 8.074 kg |
External Teeth, Diff.Side | 26 |
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with screw |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Material | Plastic |
Colour | Black |
Weight | 1.9 kg |
Heating / Cooling | with jiggle pin |
Type | Cylinder Head Cover |
Function | Cylinder Head Cover |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 1340 mm |
Rod/Strut | Push Rod |
Function | Centre Rod Assembly |
Internal Thread Size | M30 x 1,5 |
External Thread Size | M20 x 1,5 |
Cone Size | 26 mm |
Adjustable | Adjustable on one side |
Pipe Diameter | 40 mm |
Weight | 13.6 kg |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lids |
Length | 619 mm |
Fill quantity | 8 l |
Weight | 2.052 kg |
Function | Expansion Tank, coolant |
Width | 381 mm |
Material | PA (polyamide) |
Thickness | 146 mm |
Extra Description | ProKit |
Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.310 kg |
Outer diameter | 70 mm. 73.5 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M22x1,5 |
External Teeth, Diff.Side | 34 |
Transmission-side joint diameter | 79 mm |
Weight | 5.554 kg |
Min. Length | 591 mm |
External Teeth, Wheel Side | 26 |
Additional Information 2 | with nut |
Wheel Sided Joint Diameter | 82.1 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Electric Motor, window regulator |
Weight | 0.6 kg |
Function | Electric Motor, window regulator |
Number of Connectors / Ports | 6 |
Paired article numbers | 179338 |
Placement on Vehicle | Right |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 46 mm |
Outer diameter | 59 mm |
Inner diameter | 15 mm |
Number of Ribs | 6 |
Weight | 0.539 kg |
Type | Alternator Freewheel Clutch |
Function | Alternator Freewheel Clutch |
Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Mounting points diameter | 20 mm |
Piston conrod diameter | 13 mm |
Function | Shock Absorber, driver cab suspension |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 329 mm |
Min. Length | 253 mm |
Pipe Diameter | 44 mm. 53 mm |
External Thread Size | M10 x 1 |
Weight | 2.5 kg |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, kingpin |
Length | 225 mm |
Outer diameter | 50 mm |
Type | Repair Kit, kingpin |
Weight | 4.680 kg |
Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (32432)
- 2x Febi Seal Ring, steering knuckle (28398)
- 1x Febi Bush, kingpin (28397)
- 2x Febi Seal Ring, steering knuckle (32434)
- 2x Febi Circlip (05370)
- 2x Febi Bush, steering knuckle (08524)
- 1x Febi Nut (32433)
- 1x Febi Spacer, kingpin (32436)
- 1x Febi Screw (32435)
- 1x Febi Grease Nipple (04187)
- 1x Febi Bush, steering knuckle (28396)
- 1x Febi Lock Ring, steering knuckle (28395)
- 1x Febi Lock Ring, steering knuckle (28394)
Important compatibility info
Function | Clutch Release Bearing |
Weight | 3.446 kg |
Type | Clutch Release Bearing |
Additional Information 2 | with mounting kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clutch Release Bearing (105416)
- 1x Febi Repair Kit, clutch release bearing (105270)
Important compatibility info
Function | Window Regulator |
Type | Window Regulator |
Weight | 0.86 kg |
Paired article numbers | 179232 |
Placement on Vehicle | Right Rear |
Additional Information | with fastening/mounting material, without electric motor |
Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Clutch Release Bearing |
Weight | 2.989 kg |
Type | Clutch Release Bearing |
Additional Information 2 | with mounting kit |
for OE number | 20571928 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | ProKit |
Placement on Vehicle | Front Axle |
Length | 895 mm |
Additional Information 2 | with crown nut |
Rod/Strut | Push Rod |
Weight | 5.550 kg |
Cone Size | 22 mm |
Pipe Diameter | 38 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
External Thread Size | M18 x 1,5, M30 x 1,5 LHT |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 11 |
Rated Power | 1.5 kW |
Weight | 3.13 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1 |
Operating Mode | Pneumatic |
Weight | 3.15 kg |
Min. Length | 279 mm |
Pipe Diameter | 96 mm |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Shock Absorber Mounting Type | Bottom eye, Top eye |
Piston conrod diameter | 13 mm |
Mounting points diameter | 12 mm |
Placement on Vehicle | Front |
Max. Length | 377 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with piston |
Placement on Vehicle | Rear Axle |
Outer diameter | 259 mm. 180 mm |
Thickness | 280 mm. 130 mm |
Function | Bellow, air suspension |
Weight | 10.0 kg |
External Thread Size | M12 x 1,5, M16 x 1,5, M18 x 2 |
Type | Bellow, air suspension |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023